3Com 3C389 manual Installing Lanaid

Installing LANAID 4-3

IBM LAN Client provides support using one PC Card specific LAN device driver instead of two different kinds of drivers for your clients and servers. You select the appropriate device drivers and protocol stacks for your PC. The correct modules are automatically loaded based on the options you select.

IBM LAN Client provides support for the following protocols and clients:

■For DOS 5.0 or higher:

NetWare Client-32 (IPX**/SPX) IEEE 802.2

NetBIOS

DOS LAN Services

■For Windows 3.1:

NetWare Client-32 (IPX/SPX) IEEE 802.2

NetBIOS

TCP/IP

DOS LAN Services

■For Windows for Workgroups 3.11:

NetWare Client-32 (IPX/SPX) IEEE 802.2

NetBIOS

TCP/IP

DOS LAN Services

Installing LANAID

The LANAID graphical user interface operates under DOS or in a full-screenDOS session of OS/2. (A DOS window of OS/2 will not work correctly.) You need at least 1.5 MB of free, extended memory and 300 KB of conventional memory to run the program.

You can get help on each LANAID panel by selecting the Help button at the bottom of the panel. You can get context-sensitive help by placing your mouse pointer on any part of the panel and pressing [F1].