3Com 3C389 manual Using Lanaid to Install IBM LAN Client, Launch Lanaid

Page 43

4-4CHAPTER 4: LANAID AND IBM LAN CLIENT

Complete the following procedure to install LANAID on your hard disk:

1At the DOS prompt, insert TokenDisk diskette #1 in the drive and type:

a:install [Enter]

2Change the drive, path, and directory for the LANAID ﬁles, or press [Enter] to accept the default values.

The LANAID program may display a prompt requesting permission to modify the CONFIG.SYS and AUTOEXEC.BAT ﬁles. The LANAID program launches automatically after the ﬁles are and copied to the target directory.

Using LANAID to Install IBM LAN Client

LANAID must be run from DOS or full screen DOS in an OS/2 session.

1Launch LANAID.

2Click Network Software.

The Select Disk Drive window appears.

3Enter the letter of the hard disk on which you want to install IBM LAN CLient and click Continue.

The Network Operating System Choices window appears.

4Select Install IBM LAN Client and click Continue. The IBM LAN Client Installation window appears.

5Select the appropriate operating system from the drop down list box.

6Select Express Install or Custom Install. If you chose Custom Install go to step 7. If you chose Express Install go to step 9.

When you choose Express Install, NetWare Client-32 and frame type 802.2 are loaded as well as IBM LAN Client using the default protocols provided for your 3C389 PC Card type and operating system.

Image 43

Contents TokenLink Velocity Token Ring LAN PC Card User Guide 3Com Corporation 5400 Bayfront Plaza Santa Clara, California Contents Lanaid and IBM LAN Client Using a Memory Manager Figures Tables Lifetime Limited Warranty Belgium, Netherlands, Luxembourg United Kingdom, Eire Asia JapanAustralia, New Zealand Sweden, Finland, Norway DenmarkAbout this Guide How to Use This GuideIf you are looking for Turn to Icon Alerts you to ConventionsConvention Description Introduction Product Features2CHAPTER 1 Introduction Pcmcia Advantages Point EnablersDisadvantages Card Services Socket ServicesDisadvantage Card and Socket Services Versus Point Enablers Card Services EnablerSuper Client Drivers Autoset Mode Installing the 3C389 PC Card InstallingKit Contents Installation Tips1Attaching the Cable to the 3C389 PC Card Installing the 3C389 PC Card 3Modular UTP Cable for the 3C389 PC Card Connect the PC Card cable to the network portRemoving the 3C389 PC Card Turn on the power to the PCLanaid is not required to conﬁgure the following drivers Installing the Network DriversLanaid is required to conﬁgure the following drivers Windows 95 Installation Set the displayed parameters Determine if you have OSRFollow the instructions to copy the ﬁles Follow the displayed instructions to copy the ﬁles Windows 95 OSR 2 InstallationWindows for Workgroups/NDIS 2 Installation When the driver is found, click Finish Set the parametersSee for information on how to use Lanaid Using Memory Management Windows NT 3.51 InstallationSet the displayed parameters and click OK Control Panel Window, double-click the Network iconClick the Adapters tab Click Add Windows NT 4.0 InstallationType Novell NetWare Client 32 for Windows 95 InstallationClick Install Click OK when the Installation Complete message appearsClick Conﬁgure in the main menu Click OK when you have completed your selections for the NICDOS Client 16 for Novell NetWare 4.01 and Above Installation Start Mpts by performing either of the following actions Click OK on the Mpts logo panel Click Install Insert TokenDisk diskette #2 into the ﬂoppy drive and type IBM LAN Support Program/Native InstallationUsing Memory Management Lanaid Net Address IBM LAN ClientInstalling Lanaid Launch Lanaid Using Lanaid to Install IBM LAN ClientClient or Protocol Description IBM LAN Client Conﬁguration window appearsClick OK and click Close Click Suggest to have Lanaid suggest non-conﬂicting values Using Lanaid to Conﬁgure the 3C389 PC CardClick Exit to return to DOS Reboot your PC Running Lanaid From the Command LineClick Done Troubleshooting 2CHAPTER 5 Troubleshooting OS/2 Ndis Error Codes Error CodesError Code Explanation and Action TOKENCS.COM Dxmcsmod Dxmcsmod Error CodesIf EMM386.EXE is in your CONFIG.SYS, comment it out Troubleshooting Windows 95 NdisClick the Resources tab of the dialog box Troubleshooting Windows NT Ndis Running the Diagnostics ProgramSelect Properties Select the Adapter tab Test Options Initialization Error Codes Diagnostics Error Codes and Suggested ActionsOpen Error Codes Open ErrorsValue Meaning PhasesErrors Suggested Actions in Response to Open ErrorsError Code Explanation Action Error Code Explanation Action Running the Diagnostics Program Number Description Transmit Error CodesStrippedfs Memory Managers with Point Enabler Using a Memory ManagerFor compatibility mode Memory Managers with Card and Socket ServicesMemory Managers with Card and Socket Services Phoenix Card Services IBM Card ServicesExpanded Memory Speciﬁcation DEVICE=C\DOS\EMM386.EXE RAM 1024 X=D000-D1FF FRAME=C000 System Soft Card Socket Services SpecificsHOT-PLUGGABILITY and C SUSPEND/RESUME Click the 3C389 PC Card icon on the status bar Windows 95 NdisClick Stop Remove the card from your machine DOS ODI Hot-Pluggability and Suspend/ResumeDOS Ndis Hot-Pluggability Unload all the driversOS/2 Ndis Hot-Pluggability and Suspend/Resume World Wide Web Site Online Technical ServicesAccess by Digital Modem 3Com Bulletin Board Service3ComFacts Automated Fax Service Access by Analog ModemLog on to CompuServe 3ComForum on CompuServe Online ServicePress Return to see the 3ComForum main menu Support from 3Com Support from Your Network SupplierRegional Sales Office Telephone Number 3Com Corporation 3Com European HQ Regional Sales Office Telephone Number 3Com Asia Limited3Com Benelux B.V 3Com CanadaReturning Products for Repair Numbers IndexLanaid 3Com Corporation Limited Warranty FCC Class B Certification Statement Vcci Class 2 Statement United States Government Legend