![](/images/new-backgrounds/1265776/26577675x1.webp)
1.From any page, click the Library Operations heading. The Library Operations screen displays.
2.From the Library Operations page, click Inventory. The autoloader starts an inventory immediately.
Set to Home
If the autoloader is not able to successfully execute a Moving Tapes or an Inventory command, try executing a Set to Home command, and then retry the move or inventory command again.
The Set to Home command resets the autoloader as a means to help the autoloader recover from an unexpected internal condition. To Set to Home:
1.From any page, click the Library Operations heading. The Library Operations screen displays.
2.From the Library Operations page, click Set to Home. This executes a reset command to the autoloader.