Ricoh 400780, Type B, AP2610 setup guide Installing Options, Option List

Page 23

2. Installing Options

RCAUTION:

•Be sure to turn off the printer and wait for about an hour before installing options. Not waiting for the printer to cool down can result in a burn.

•When lifting the printer, use the inset grips on both sides of the printer, oth- erwise the printer might fall and cause personal injury.

•When you move the printer, unplug the power cord from the wall outlet to avoid a fire or an electric shock.

Important

❒The voltage rating of the connector for options is 24V DC or less.

❒Turn the power off before removing the Paper Feed Unit Type 2600, 1-bin Shift Sort Tray Type 2600, or Mailbox CS380. Removing any of these units with the power on may cause the printer to fail.

❖Option List

Note

❒See the inside front cover of this manual to confirm which printer (Basic model or Network standard model) you have.

 

 

Basic model Printer

Network standard

 

 

 

model Printer

 

 

 

 

Paper Feed Unit Type 2600

 

❍

❍

 

 

 

 

Envelope Feeder Type 2600

 

❍

❍

 

 

 

 

1-bin Shift Sort Tray Type 2600

 

❍

❍

 

 

 

 

CS380 (Mailbox)

 

❍

❍

 

 

 

 

AD410 (Duplex Unit)

 

❍

❍

 

 

 

 

Memory Unit TypeB 64MB

 

❍

❍

 

 

 

 

Hard Disk Drive Type 2600

 

❍

❍

 

 

 

Network Interface Board Type 2610 *1

❍

 

 

 

 

 

1394 Interface Unit Type 4510 *1

*2

❍

❍

 

 

 

 

802.11b Interface Unit Type A *1

*2

❍

❍

❍: Available option

*1

*2

With Basic model, these cannot be installed at the same time.

With Network standard model, these cannot be attached at the same time.

Note

❒Up to two Paper Feed Units can be attached to the printer at the same time.

❒The installation of the Paper Feed Unit is necessary to attach the Envelope Feeder Unit.

11

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Setup Guide Page Trademarks Safety During Operation Safety InformationPositions of Labels and Hallmarks for Rwarning and Rcaution Page Energy Star Program SpecificationsEnergy Saver mode Manuals for This Printer Manuals for This PrinterLimitation How to Read This ManualSymbols PreparationTable of Contents Installing the Printer Driver Using Ieee Installing the Rpcs Printer DriverInstalling the PostScript Printer Driver Installing the Printer Driver Using USBPage Compact Body Features of This PrinterMajor Specifications Time SavingRpcs printer driver Printer Drivers for This PrinterPCL printer drivers Adobe PostScript Printer Drivers and PPD files SmartNetMonitor for Client SmartNetMonitor for AdminSoftware and Utilities Included on the CD Agfa Monotype Font ManagerViewing the Contents of the CD-ROM Exterior Guide to This PrinterMainframe Upper Cover Front Cover Release Button Power CordPower Switch Output Tray Standard TrayInterior Menu key Job Reset keyControl Panel Form Feed keyEnter # key Escape keyOption List Installing OptionsEnvelope Feeder Type Available OptionsPaper Feed Unit Type 2600 Tray 2 or Tray Basic model Printer Interior 802.11b Interface Unit Type a Memory Unit TypeB 64MB Network standard model Printer InteriorMemory Unit TypeB 64MB Hard Disk Drive Type Attach the interface cable to the printer Paper Feed Unit TypeReference Envelope Feeder Type Pull the handle and slide the con- troller board out Memory Unit TypeB 64MBUse a coin to remove the two screws Pull out the handle of the control- ler boardIf the Duplex Unit is not at- tached, go to step N Installing Options Network Interface Board Type Installing the Network Interface BoardFasten the Network Interface Board to the controller board If the Duplex Unit is not at- tached, go to step O Turn off the power switch Loop the network interface cable Connecting the Network Interface Cable to the NetworkInterface Unit Type Installing the 1394 Interface UnitAttach the 1394 Interface Unit to the controller board Fasten the 1394 Interface Unit to the controller board Bus Connecting the 1394 InterfacePower supply Required cable802.11b Interface Unit Type a Attach the 802.11b Interface Unit Ing the Configuration Fasten the Hard Disk Drive Hard Disk Drive TypePress On Line Press Enter # to format the Hard Disk DriveRemove the rear cover in the hor- izontal direction AD410 Duplex UnitAfter installing the last option that Remove the upper cover of the printer Bin Shift Sort Tray TypeSlide the upper tray into the 1-bin Shift Sort Tray CS380 Mailbox CS380 Mailbox Installing Options Ethernet Configuration Configuring the Printer for the NetworkPress Enter # Press U or T to display Net- work SetupPress Menu Press U or T to display Host Interface menuIf you use TCP/IP, assign the IP address to the printer Press U or T to display Network BootPress U or T to display Ethernet If you use NetWare, select the frame type for NetWarePress U or T to display Frame Type NW Press U or T to display LAN TypePress U or T to display IP over Ieee 1394 ConfigurationPress U or T to display Ieee 1394 Setup Press U or T to display Scsi print Assign the IP address to the printerPress U or T until the fol Lowing message appears Ready Press U or T to display Ieee 802.11b Ieee 802.11b Wireless LAN ConfigurationGateway Address Subnet MaskConfiguring the Printer for the Network Installation Method Installing the Printer Driver and SoftwareSelect Quick Install Quick InstallFollow the instructions on the screen Click InstallSelect PCL/RPCS Printer Drivers Installing the PCL 6/5e Printer DriverInstalling the PCL 6/5e Printer Driver Setting Up Options Installing the Rpcs Printer Driver Installing the Rpcs Printer DriverInstalling the Rpcs Printer Driver Click Next Check Local Printer and then click Next Installing the PostScript Printer DriverWindows 95/98/Me Installing the PostScript Printer Driver Installing the printer driverSelect PostScript 3 Printer Driver Add Printer Wizard starts Setting up optionsClick the Device Settings tab Windows NT 4.0 Installing the PostScript Printer Driver Bidirectional transmission When connecting with a parallel cableWhen connecting with USB When connecting with the networkWhen connecting with Ieee Setting up the PPD file Macintosh Installing the PostScript 3 Printer DriverClose the Chooser dialog box Click ConfigureClick Finish Installing the Printer Driver Using USBWindows 98/Me Installing the Printer Driver Using USB Check Specify a location, and then click BrowseEnter the printer name, and then click Save Macintosh-Creating a Desktop Printer iconClick Change in USB Printer Selection Click CreatePrinting with Scsi Print Installing the Printer Driver Using IeeeClick Open Click OK Click BrowseWindows XP Inactivating the Device Printing with IP overFound New Hardware Wizard dialog box, and then click Next Select SmartNetMonitor for Client/Admin Installing the SmartNetMonitor for Client/AdminSelect Agfa Monotype Font Manager Installing the Agfa Monotype Font ManagerUsing Adobe PageMaker Version 6.0 or Index Rpcs UE USA G074 Means Power ON. b means Power OFF UE USA G074-8637

400780, AP2610, Type B specifications

Ricoh Type B, AP2610, 400780 is a highly versatile multifunctional printer designed to meet the diverse printing needs of modern businesses. It stands out for its ability to deliver high-quality prints, advanced scanning capabilities, and efficient copying features, all in a compact design. This device is an excellent choice for small to medium-sized offices that require the functionality of multiple equipment types in one device.

One of the key features of the Ricoh AP2610 is its fast printing capability. It can produce up to 26 pages per minute, ensuring that users can handle large print jobs without excessive waiting times. The printer is equipped with a high-resolution output of 1200 x 1200 dpi, which guarantees sharp and clear text documents and vibrant graphics. This makes the AP2610 suitable for both professional presentations and day-to-day printing tasks.

The device also supports a variety of media types and sizes, offering flexibility when it comes to printing brochures, flyers, and multi-page documents. The integrated automatic document feeder allows for quick copying and scanning of double-sided documents, streamlining workflows and increasing productivity.

Networking is another important aspect of the Ricoh AP2610. It comes with built-in Ethernet connectivity, which enables seamless integration into office environments. Users can easily connect their computers and mobile devices to the printer, facilitating printing from various sources. This feature is particularly beneficial in busy workplaces where collaboration and shared access to printer resources are essential.

The device is also designed with energy efficiency in mind. It complies with various environmental regulations and standards, making it a sustainable choice for businesses looking to reduce their carbon footprint. Its low power consumption during idle mode helps lower operational costs while contributing to an eco-friendly work environment.

Moreover, the Ricoh AP2610 is known for its ease of use. Its user-friendly interface allows for simple navigation and operation, making it accessible for all staff members, regardless of their technical expertise. Regular maintenance is simplified, ensuring that the printer remains in optimal working condition with minimal downtime.

In summary, the Ricoh Type B, AP2610, 400780 is a robust and multifunctional printer that combines speed, quality, and versatility in one compact device. Its advanced features and technologies make it an ideal choice for businesses looking to enhance their productivity while maintaining cost-effectiveness and sustainability.
Top Page Image Contents