Installing Options
D Use a coin to remove the two screws.
Note
❒These screws are used again in step M.
2 |
ZGDX280J |
E Pull out the handle of the control- ler board.
ZGDX370J
F Pull the handle and slide the con- troller board out.
ZGDX260J |
G Place the controller board on a flat surface.
H Use a coin to remove the two screws, and then remove the cov- er.
Note
❒These screws are used again in step J.
ZGDX410J |
I Attach the 1394 Interface Unit to the controller board.
Insert the end of the 1394 Interface Unit into the opening (A), and then push down until it clicks (B).
ZGDX421J |
ZGDX430J |
26