Installing Options
Connecting the 1394 Interface
Cable to the Printer | ||
specifications | ||
| ||
A Attach the 1394 interface cable to | ❖ Interface Connector: | |
the jack on the 1394 Interface | IEEE 1394 (6 pins ⋅ 2) | |
Unit. |
|
2 | Both types of jack are available. | ❖ Required cable: | |
1394 interface cable (6 pins x 4 | |||
|
| ||
|
| pins, 6 pins x 6 pins) | |
|
| Important | |
|
| ❒ You cannot plug devices togeth- | |
|
| er to create loops. | |
|
| ❒ Do not use a cable more than 4.5 | |
|
| meters (14.8 feet) long. | |
|
| ❖ Connectable number of devices in a | |
| ZGDX550J | bus: |
B Connect the other end of the 1394 interface cable to the computer or the other IEEE 1394 node.
Note
❒After installing the last option that you want, print the configuration page to confirm the installation. If the new device is listed in the col- umn of configuration options, then it has been properly installed. For more information about printing the configuration page, see "Print- ing the Configuration Page" in the Printer Reference on the
Maximum 63
❖Allowed cable hops in a bus:
Maximum 16
❖Power supply:
Nonpower supply
Cable Power repeated (IEEE
28