Ricoh 400780 If you use NetWare, select the frame type for NetWare, Press Enter # Press On Line

Page 56

Configuring the Printer for the Network

3

44

J If you use NetWare, select the frame type for NetWare.

Select one of the items below if necessary.

Auto (Default)

Ethernet 802.3

Ethernet 802.2

Ethernet II

Ethernet SNAP

Note

Usually, use the default setting (“Auto”). When you first select “Auto”, the frame type detected by the printer is adopted. If your network can use more than two frame types, the print- er may fail to select the correct frame type if “Auto” is selected. In this case, select the appropri- ate frame type.

A Press {U} or {T} to display “Frame Type (NW)”.

Network Setup:

Frame Type (NW)

BPress {Enter #}.

The current setting appears on the panel display.

Frame Type (NW): *Auto

C Press {U} or {T} to display the frame type you want to use.

DPress {Enter #}.

K Select the interface.

Ethernet and IEEE 802.11b appear only when both the Network Inter- face Board and the 802.11b Inter- face Unit are installed.

Select one of the items below.

Ethernet

IEEE 802.11b

A Press {U} or {T} to display "LAN Type".

Network Setup:

LAN Type

BPress {Enter #}.

The current setting appears on the panel display.

CPress {U} or {T} to display "Ethernet".

LAN Type: *Ethernet

DPress {Enter #}.

L Press {On Line}.

On Line

Menu

 

Job Reset

Escape

 

Form Feed

Enter

 

Power

Error

Data In

ZFDP010N

"Ready" appears on the panel dis- play.

Ready

M Print a configuration page to con- firm the settings made. See "Printing a Configuration Page" in the Printer Reference.

The settings are now complete. Go to p.51 “Installing the Printer Driv- er and Software”.

Image 56
Contents Setup Guide Page Trademarks Safety Information Safety During OperationPositions of Labels and Hallmarks for Rwarning and Rcaution Page Energy Star Program SpecificationsEnergy Saver mode Manuals for This Printer Manuals for This PrinterHow to Read This Manual SymbolsPreparation LimitationTable of Contents Installing the Rpcs Printer Driver Installing the PostScript Printer DriverInstalling the Printer Driver Using USB Installing the Printer Driver Using IeeePage Features of This Printer Major SpecificationsTime Saving Compact BodyRpcs printer driver Printer Drivers for This PrinterPCL printer drivers Adobe PostScript Printer Drivers and PPD files SmartNetMonitor for Admin Software and Utilities Included on the CDAgfa Monotype Font Manager SmartNetMonitor for ClientViewing the Contents of the CD-ROM Exterior Guide to This PrinterMainframe Front Cover Release Button Power Cord Power SwitchOutput Tray Standard Tray Upper CoverInterior Job Reset key Control PanelForm Feed key Menu keyEscape key Enter # keyInstalling Options Option ListEnvelope Feeder Type Available OptionsPaper Feed Unit Type 2600 Tray 2 or Tray Basic model Printer Interior 802.11b Interface Unit Type a Memory Unit TypeB 64MB Network standard model Printer InteriorMemory Unit TypeB 64MB Hard Disk Drive Type Paper Feed Unit Type Attach the interface cable to the printerReference Envelope Feeder Type Memory Unit TypeB 64MB Use a coin to remove the two screwsPull out the handle of the control- ler board Pull the handle and slide the con- troller board outIf the Duplex Unit is not at- tached, go to step N Installing Options Installing the Network Interface Board Network Interface Board TypeFasten the Network Interface Board to the controller board If the Duplex Unit is not at- tached, go to step O Connecting the Network Interface Cable to the Network Turn off the power switch Loop the network interface cableInstalling the 1394 Interface Unit Interface Unit TypeAttach the 1394 Interface Unit to the controller board Fasten the 1394 Interface Unit to the controller board Connecting the 1394 Interface Power supplyRequired cable Bus802.11b Interface Unit Type a Attach the 802.11b Interface Unit Ing the Configuration Hard Disk Drive Type Fasten the Hard Disk DrivePress Enter # to format the Hard Disk Drive Press On LineAD410 Duplex Unit Remove the rear cover in the hor- izontal directionAfter installing the last option that Bin Shift Sort Tray Type Remove the upper cover of the printerSlide the upper tray into the 1-bin Shift Sort Tray CS380 Mailbox CS380 Mailbox Installing Options Configuring the Printer for the Network Ethernet ConfigurationPress U or T to display Net- work Setup Press MenuPress U or T to display Host Interface menu Press Enter #Press U or T to display Network Boot If you use TCP/IP, assign the IP address to the printerIf you use NetWare, select the frame type for NetWare Press U or T to display Frame Type NWPress U or T to display LAN Type Press U or T to display EthernetPress U or T to display IP over Ieee 1394 ConfigurationPress U or T to display Ieee 1394 Setup Press U or T to display Scsi print Assign the IP address to the printerPress U or T until the fol Lowing message appears Ready Ieee 802.11b Wireless LAN Configuration Press U or T to display Ieee 802.11bSubnet Mask Gateway AddressConfiguring the Printer for the Network Installing the Printer Driver and Software Installation MethodQuick Install Select Quick InstallClick Install Follow the instructions on the screenSelect PCL/RPCS Printer Drivers Installing the PCL 6/5e Printer DriverInstalling the PCL 6/5e Printer Driver Setting Up Options Installing the Rpcs Printer Driver Installing the Rpcs Printer DriverInstalling the Rpcs Printer Driver Installing the PostScript Printer Driver Windows 95/98/Me Installing the PostScript Printer DriverInstalling the printer driver Click Next Check Local Printer and then click NextSetting up options Select PostScript 3 Printer Driver Add Printer Wizard startsClick the Device Settings tab Windows NT 4.0 Installing the PostScript Printer Driver When connecting with a parallel cable Bidirectional transmissionWhen connecting with USB When connecting with the networkWhen connecting with Ieee Macintosh Installing the PostScript 3 Printer Driver Setting up the PPD fileClick Configure Close the Chooser dialog boxInstalling the Printer Driver Using USB Windows 98/Me Installing the Printer Driver Using USBCheck Specify a location, and then click Browse Click FinishMacintosh-Creating a Desktop Printer icon Click Change in USB Printer SelectionClick Create Enter the printer name, and then click SaveInstalling the Printer Driver Using Ieee Printing with Scsi PrintClick Browse Click Open Click OKWindows XP Printing with IP over Inactivating the DeviceFound New Hardware Wizard dialog box, and then click Next Installing the SmartNetMonitor for Client/Admin Select SmartNetMonitor for Client/AdminInstalling the Agfa Monotype Font Manager Select Agfa Monotype Font ManagerUsing Adobe PageMaker Version 6.0 or Index Rpcs UE USA G074 Means Power ON. b means Power OFF UE USA G074-8637

400780, AP2610, Type B specifications

Ricoh Type B, AP2610, 400780 is a highly versatile multifunctional printer designed to meet the diverse printing needs of modern businesses. It stands out for its ability to deliver high-quality prints, advanced scanning capabilities, and efficient copying features, all in a compact design. This device is an excellent choice for small to medium-sized offices that require the functionality of multiple equipment types in one device.

One of the key features of the Ricoh AP2610 is its fast printing capability. It can produce up to 26 pages per minute, ensuring that users can handle large print jobs without excessive waiting times. The printer is equipped with a high-resolution output of 1200 x 1200 dpi, which guarantees sharp and clear text documents and vibrant graphics. This makes the AP2610 suitable for both professional presentations and day-to-day printing tasks.

The device also supports a variety of media types and sizes, offering flexibility when it comes to printing brochures, flyers, and multi-page documents. The integrated automatic document feeder allows for quick copying and scanning of double-sided documents, streamlining workflows and increasing productivity.

Networking is another important aspect of the Ricoh AP2610. It comes with built-in Ethernet connectivity, which enables seamless integration into office environments. Users can easily connect their computers and mobile devices to the printer, facilitating printing from various sources. This feature is particularly beneficial in busy workplaces where collaboration and shared access to printer resources are essential.

The device is also designed with energy efficiency in mind. It complies with various environmental regulations and standards, making it a sustainable choice for businesses looking to reduce their carbon footprint. Its low power consumption during idle mode helps lower operational costs while contributing to an eco-friendly work environment.

Moreover, the Ricoh AP2610 is known for its ease of use. Its user-friendly interface allows for simple navigation and operation, making it accessible for all staff members, regardless of their technical expertise. Regular maintenance is simplified, ensuring that the printer remains in optimal working condition with minimal downtime.

In summary, the Ricoh Type B, AP2610, 400780 is a robust and multifunctional printer that combines speed, quality, and versatility in one compact device. Its advanced features and technologies make it an ideal choice for businesses looking to enhance their productivity while maintaining cost-effectiveness and sustainability.