Configuring the Printer for the Network
G Assign the IP address to the printer.
Do not overlap the IP address in the same subnet or the same IP ad- dress in the network setting.
Note
❒To get the IP address for the printer, contact your network administrator.
A Press {U} or {T} until the fol-
3 | lowing message appears. |
IEEE 1394 Setup:
IP Address1394
BPress {Enter #}.
The current IP address appears on the panel display.
IP Address1394: 000.000.000.000
C Press {U} or {T} to enter the leftmost entry field of the IP address.
IP Address1394: 192.022.033.044
DPress {Enter #}.
The pointer (k) moves to the next entry field automatically.
E Repeat steps C and D to enter the IP address.
IP Address1394: 192.168.000.011
Check if the pointer (k) is at the rightmost position, and press {Enter #} to register the IP ad- dress you selected.
IEEE 1394 Setup:
IP Address1394
H Set "Subnet Mask1394" in the same way.
I Set "SCSI print" and
Note
❒The default setting is "Active".
J Press {U} or {T} to display "SCSI print".
IEEE 1394 Setup:
SCSI print
K Press {Enter #}.
The following message appears on the panel display.
IP Address1394: 192.02k.033.044
Note
❒The value moves by 10 if {U} or {T} is kept pressed.
❒You can return the pointer (k) to the previous (left) entry field by pressing {Escape}.
❒If you press {Escape} when the pointer (k) is on the left- most position, the selected IP address is reset.
SCSI print: *Active
L Press {U} or {T} to select either "Active" or "Not Active", and then press {Enter #}.
Set "
46