Samsung CLP-660 Series Understanding the Status LED, Status LED with the toner cartridge messages

Page 17

Understanding the Status LED

The color of the Status LED indicates the machine's current status.

Status

 

Description

 

 

 

 

Off

 

The machine is powered off.

 

 

 

 

Green

Blinking

When the green LED slowly blinks, the

 

 

 

machine is receiving data from the computer.

 

 

When the green LED blinks rapidly, the

 

 

 

machine is printing data.

 

 

 

 

 

On

The machine is powered on and can be used.

 

 

The machine is in power save mode. When

 

 

 

data is received, it switches to the ready mode

 

 

 

automatically.

 

 

 

 

Red

Blinking

A minor error has occurred and the machine

 

 

 

is waiting for the error to be cleared. Check

 

 

 

the display message, and solve the problem

 

 

 

referring to "Understanding display

 

 

 

messages" on page 7.7.

 

 

The toner cartridge is low. Order a new toner

 

 

 

cartridge, see "Ordering supplies and

 

 

 

accessories" on page 8.1. You can

 

 

 

temporarily improve print quality by

 

 

 

redistributing the toner. See "Replacing the

 

 

 

toner cartridge" on page 6.4.

 

 

 

 

 

On

A problem has occurred such as a paper jam,

 

 

 

opened cover or no paper in the tray, so that

 

 

 

the machine can not continue the job. Check

 

 

 

the message on the display, and refer to

 

 

 

Understanding display messages on page 7.7

 

 

 

to solve the problem.

 

 

The toner cartridge is empty, exhausted, or

 

 

 

needs to be changed. See "Understanding

 

 

 

display messages" on page 7.7.

 

 

 

 

Note

Always check the message on the display to solve the problem. The instruction in the Troubleshooting section will guide you to operate the machine properly. See page 7.1 for more information.

Status LED with the toner cartridge messages

The status of toner cartridges is indicated by the status LED and the LCD display. If the toner cartridge is low or needs to be changed, the status LED turns red and the display shows the message. However the arrow mark (or marks) shows which color toner is of concern or may be installed with a new cartridge.

Example:

The above example shows the magenta toner cartridge status indicated by the arrow. Check the message to find out what the problem is and how to solve it. See page 7.7 to browse the detailed information on error messages.

1.5 <Introduction>

Image 17
Contents Page Page Contact Samsung worldwide Switzerland Contents Troubleshooting MaintenanceOrdering supplies and accessories Installing accessoriesGlossary Index SpecificationsFinding more information About this user’s guideImportant Precautions and Safety Information Safety and Regulatory InformationEnvironmental and Safety Consideration Laser Safety StatementPower Saver Ozone SafetyRecycling Radio Frequency EmissionsReplacing the Fitted Plug for UK Only Declaration of Conformity European CountriesOpenSSL License Canadian Radio Interference RegulationsOriginal SSLeay License Introduction Special featuresFront view Machine overviewRear view Control panel overview Status Description Understanding the Status LEDStatus LED with the toner cartridge messages Menu overview Accessing menusUnderstanding the menu map Information Description on each menuLayout PaperEmulation System SetupGraphic Network ColorSoftware overview Printer driver featuresSupplied software Printer driver CLP-610 SeriesPrinter driver CLP-660 Series System requirementsWindows LinuxGetting Started Setting up the hardwareSetting up the network Supported operating systems Configuring network protocol via the machineInstalling the software Altitude Setting after Software Installation Printers basic settingsSetting job timeout Click Printer SettingSetting the default paper size and type Using power saving featureSetting the default tray Changing the font settingTo refresh Guidelines for selecting and storing print media Selecting and loading print mediaSelecting print media Type Size Dimensions Weighta Capacityb Specifications on print mediaMedia type Guidelines Media sizes supported in each modeGuidelines for special print media Loading paper in the tray 1 or optional tray Loading paperTray Changing the size of the paper in the paper tray Multi-purpose tray Tips on using the multi-purpose traySetting the paper size and type Printing a document Canceling a print jobBasic printing Printing a machine configuration report MaintenanceCleaning your machine Printing a network reportMaintenance Redistributing toner Maintaining the cartridgeToner cartridge storage Expected cartridge lifeReplacing the toner cartridge Maintenance Replacing the paper transfer belt To access SyncThru Web Service Maintenance partsManaging your machine from the website Items Yield AverageTips for avoiding paper jams TroubleshootingClearing paper jams Paper feed areaTroubleshooting Multi-purpose tray Fuser unit area Paper exit area Optional tray Understanding display messages Install Message Explanation Solution Duplex JamInstall Toner Message Explanation Solution Low Heat ErrorSelf Diagnostics Message Explanation Solution Replace FuserTemperature Message Explanation Solution Toner EmptyPaper feeding problems Solving other problemsPrinting problems Condition Suggested solutionsCondition Possible cause Suggested solutions Condition Suggested solutions Light or faded print Printing quality problemsTo Normal Toner specksCondition Suggested solutions Vertical repetitive Condition Suggested solutions White SpotsVertical lines Color or BlackCondition Suggested solutions Loose toner Condition Suggested solutions Curl or waveBack of printouts Are dirtyCommon PostScript problems Common Windows problemsProblem Possible Cause Solution Tray option of the InstallableCommon Macintosh problems Common Linux problemsProblem Possible Cause and Solution Problem Suggested solutionsAccessories Ordering supplies and accessoriesHow to purchase SuppliesInstalling a memory module Installing accessoriesPrecautions to take when installing accessories Activating the added memory in the PS printer properties Select Device SettingsSpecifications and Description SpecificationsCLP-610 Series CLP-610 Series CLP-660 SeriesCLP-660 Series Specifications Glossary BootpISO Index USB Software section Contents Using Windows Postscript Driver Using Your Printer with a Macintosh Installing Software for Local Printing Installing Printer SoftwareTypical Installation Select Typical installation for a local printer. Click NextCustom Installation Select the components to be installed and click Next Select Custom installation. Click NextInstalling Software for Network Printing Custom Installation Select Custom installation. Click Next Reinstalling Printer Software Removing Printer Software Select the components you want to reinstall and click Next12Click OK in the Install From Disk window Installing mono printer driverSelect your printer driver from the Name drop-down list Printing a DocumentSelect Printers and Faxes Select your printer driver icon Printer SettingsPrinting to a file PRN Paper Tab Layout TabGraphics Tab Advanced Options Extras TabWatermark OverlayUsing Help Using a Favorite SettingAbout Tab Printer TabPrinting Multiple Pages on One Sheet of Paper N-Up Printing Advanced PrintingPrinting Booklets Printing PostersPrinting a Reduced or Enlarged Document Printing on Both Sides of PaperFitting Your Document to a Selected Paper Size NoneUsing an Existing Watermark Using WatermarksCreating a Watermark Editing a WatermarkWhat is an Overlay? Using OverlaysUsing a Page Overlay Creating a New Page OverlayAdvanced Using Windows PostScript DriverSetting Up a Client Computer Setting Up a Host ComputerCheck the Share this printer box Double-clickPrinters and FaxesUnderstanding Smart Panel Changing the Smart Panel Program Settings Opening the Troubleshooting GuideUsing Printer Settings Utility Using Onscreen Help FileGetting Started Installing the Unified Linux DriverInstalling the Unified Linux Driver Click Uninstall Uninstalling the Unified Linux DriverSuch as Unified Driver Configurator Printers Configuration Using the Unified Driver ConfiguratorOpening the Unified Driver Configurator Double-clickUnified Driver Configurator on the desktopClasses Tab Configuring Printer PropertiesPorts Configuration Printing Files Printing from ApplicationsInstalling the Printer driver Installing SoftwareUninstalling the Printer driver Printer driverFor a USB-connected Setting Up the PrinterFor a Network-connected Printing Changing Printer SettingsPrinting a Document LayoutPaper Printer FeaturesGraphics Duplex Printing Printing Multiple Pages on One Sheet of PaperIndex Setting darkness 16 favorites 18 image mode 16 resolution Rev.5.00