Changing the size of the paper in the paper tray
To load longer sizes of paper, such as
2After inserting paper into the tray, while pinching the paper width guide as shown, move it toward the stack of paper until it lightly touches the side of the stack. Do not press the guide too tightly to the edge of the paper; the guide may bend the paper.
1 tray extend lever
2 paper length guide
3 paper width guide
1Adjust the paper length guide to the desired paper length. It is preset to Letter or A4 size depending on the country.
When you use
3Press and hold the green lever on the back of the tray, when you are holding the lever, extend the tray to the corresponding position.
tray extend lever
4Load the paper into the tray.
5Place the tray into the machine.
6Set the paper size from your computer. (See page 4.7)
Note
•Do not push the paper width guides far enough to cause the materials to warp.
•If you do not adjust the paper width guides, it may cause paper jams.
4.5 <Selecting and loading print media>