3Pull up the paper jam lever to release the fusing part of the fuser unit and carefully take the jammed paper out of the machine.
4Press down the paper jam lever to fasten the fusing part.
5Close the inner cover.
6After removing the jammed paper, check for paper which may be jammed in other parts of the machine.
7Close the top cover. Make sure that it is securely latched.
Caution
If the top cover is not completely closed, the machine will not operate.
In the paper exit area
If paper is jammed in the paper exit area, follow the next steps to release the jammed paper.
1If a long portion of the paper is visible, pull it straight out. Open and close the front cover firmly. The machine will resume printing.
If you cannot find the jammed paper, or if there is any resistance removing the paper, stop pulling and go to step 2.
2Open the top cover.
3Open the inner cover using the handle on it.
Caution
Do not touch the fuser inside the inner cover. It is hot and could cause burns! The fuser's operating temperature is 180°C
(356°F). Take care when removing paper from the machine.
4Pull up the paper jam lever to loose the fusing part of the fuser unit and carefully take the jammed paper out of the machine.