| Menu overview | |
Understanding the menu map | ||
|
The control panel provides access to various menus to set up the machine or to use the machine's functions. Refer to the following diagram.
Accessing menus
The next steps show how to print the menu map of this machine, and they are the general way to select menus and configure your machine.
1Make sure your machine is properly connected with all the necessary cables, and turn on the machine.
2Press Menu on the control panel, until you see the menu (ex. Information) you want on the bottom line of the display.
3Press OK to access the menu.
4Press left/right arrow until the menu item (ex. Menu Map) you want displays on the bottom line.
5Press the OK button to confirm the selected item.
Note
If the menu item has sub menus, repeat steps 4 and 5.
6Press left/right arrow until the menu item (ex. Print?) you want displays on the bottom line.
7Press OK to process your selection, save your input or selection.
An asterisk (*) appears next to the selection on the display, indicating that it is now the default.
8To exit the menu, press Back repeatedly, or Stop.
InformationLayout
Menu Map | Orientation |
Configuration | Simplex Margin |
Demo Page | Duplex |
PCL Font List | Duplex Margin |
PS Font List |
|
Graphic | Paper |
|
|
Resolution | Copies |
| Paper Size |
| Paper Type |
| Paper Source |
| Tray Chaining |
System Setup | Emulation |
Language | Emulation Type |
Power Save | Setup |
Auto Continue |
|
Altitude Adj. |
|
Auto CR |
|
Job Timeout |
|
Maintenance |
|
Clear Setting |
|
Network | Color |
Note
•If no key is pressed within one minute, the machine automatically returns to ready mode.
•The print settings made from the printer driver on a connected computer override the settings on the control panel.
TCP/IP | Custom Color |
Ethernet Speed | Auto Color Reg. |
Clear Setting |
|
Network Info. |
|
1.6 <Introduction>