2Using the handle, completely open the front cover.
Caution
•Do not touch the green surface, the OPC drum or the front of the toner cartridge, with your hands or any other material. Use the handle on each cartridge in order to avoid touching this area.
•Be careful not to scratch the surface of the paper transfer belt.
•If you leave the front cover open for more than a few minutes, the OPC drum can be exposed to light. This will cause damage to the OPC drum. Cover the toner cartridge’s OPC drum with the some paper could avoid damaging it from the light while you clean the inside.
3Grasp the handles on the toner cartridge and pull to remove the cartridge from the machine.
Caution
If you open the front door, be careful not to touch the underneath of the control panel (the lower part of the fuser unit). The temperature of the fuser unit might be high and could damage your skin.
Note
When you open the front door and work inside the machine, it is highly recommend that you remove the paper transfer belt first. Because the work you do could contaminate the paper transfer belt.
4Press the green release handle to release the paper transfer belt. Holding the handle on the paper transfer belt, lift it out of the machine.
5Locate the long strip of glass (LSU) inside the cartridge compartment, and gently swab the glass to see if dirt turns the white cotten black.