Samsung CLP-610 Series manual Using power saving feature, Setting the default paper size and type

Page 28

Using power saving feature

The machine provides power saving features. When the machine is not in use, you can save electricity with the provided power save mode. Set the specific time the machine goes to the power save mode.

1Press Menu on the control panel until you see System Setup on the bottom line of the display.

2Press OK to access System Setup.

3Press the left/right arrow until Power Save displays.

4Press OK.

5Press the left/right arrow to select the amount of time.

6Press OK.

7Press Stop to return to machine ready mode.

Setting the default paper size and type

You can select the paper size you would like to keep for printing job.

Note

For detailed information on the Custom paper size setting and the paper type setting, see "Setting the paper size and type" on page 4.7.

1Press Menu on the control panel until you see Paper on the bottom line of the display.

2Press OK to access the paper setup.

3Press the left/right arrow until Paper Size displays.

4Press OK.

5Press the left/right arrow to select the paper size such as A4, Letter or Custom.

6Press OK.

7Press Stop to return to machine ready mode.

Setting the default tray

If you want to select the particular tray for the print job, use the Paper Source feature.

1Press Menu on the control panel until you see Paper on the bottom line of the display.

2Press OK to access the paper setup.

3Press the left/right arrow until Paper Source displays.

4Press OK.

5Press the left/right arrow to select the paper tray, such as Tray 1, Tray 2, MP Tray, Manual Feeder or Auto.

Note

If you set this menu to Auto, an additional menu, Tray Chaining appears. With Tray Chaining, the machine finds a secondary available tray to continue a printing job in case the primary tray, usually tray 1, is unavailable (or not ready).

6Press OK.

7Press Stop to return to machine ready mode.

Changing the font setting

Your machine has preset the font for your region or country. If you want to change the font which you prefer or set the font under special condition such as the DOS environment, you can change the font setting as follows:

1Press Menu on the control panel until you see Emulation feature.

2Press OK to access the font setting.

3Press the left/right arrow until Setup displays.

4Press the left/right arrow until PCL displays.

5Press the left/right arrow until Symbol displays.

6Press the left/right arrow until your preferred font displays.

7Press OK.

8Press Stop to return to machine ready mode.

Note

Following information shows the proper font list for corresponding languages.

•Russian: CP866, Cyrillic

•Hebrew: 15Q, 8H, 0H (Israel only)

•Greek: GREEK, PC737

•Arabic & Farsi: ARABIC8, WINARABIC, PC864, FARSI, ISOARABIC

•OCR : OCR-A, OCR-B

Using SetIP program

This program is for the network IP setting using the MAC address which is the hardware serial number of the network printer card or interface. Especially, it is for the network administrator to set several network IPs at the same time.

1Insert the driver CD provided along with your machine.

2Start Windows Explorer and open the X drive. (X represents your CD-ROM drive.)

3Double click Application > SetIP.

4Open the language folder you want to use.

5Double click Setup.exe to install this program.

3.5 <Getting Started>

Page 27 Page 29
Image 28
Page 27 Page 29
Contents Page Page Contact Samsung worldwide Switzerland Contents Maintenance TroubleshootingOrdering supplies and accessories Installing accessoriesSpecifications Glossary IndexAbout this user’s guide Finding more informationSafety and Regulatory Information Important Precautions and Safety InformationEnvironmental and Safety Consideration Laser Safety StatementOzone Safety Power SaverRecycling Radio Frequency EmissionsDeclaration of Conformity European Countries Replacing the Fitted Plug for UK OnlyOpenSSL License Canadian Radio Interference RegulationsOriginal SSLeay License Special features IntroductionMachine overview Front viewRear view Control panel overview Status LED with the toner cartridge messages Understanding the Status LEDStatus Description Understanding the menu map Accessing menusMenu overview Description on each menu InformationLayout PaperGraphic System SetupEmulation Color NetworkPrinter driver features Software overviewSupplied software Printer driver CLP-610 SeriesSystem requirements Printer driver CLP-660 SeriesWindows LinuxSetting up the network Setting up the hardwareGetting Started Configuring network protocol via the machine Supported operating systemsInstalling the software Printers basic settings Altitude Setting after Software InstallationSetting job timeout Click Printer SettingUsing power saving feature Setting the default paper size and typeSetting the default tray Changing the font settingTo refresh Selecting print media Selecting and loading print mediaGuidelines for selecting and storing print media Specifications on print media Type Size Dimensions Weighta CapacitybGuidelines for special print media Media sizes supported in each modeMedia type Guidelines Tray Loading paperLoading paper in the tray 1 or optional tray Changing the size of the paper in the paper tray Tips on using the multi-purpose tray Multi-purpose traySetting the paper size and type Basic printing Canceling a print jobPrinting a document Maintenance Printing a machine configuration reportCleaning your machine Printing a network reportMaintenance Maintaining the cartridge Redistributing tonerToner cartridge storage Expected cartridge lifeReplacing the toner cartridge Maintenance Replacing the paper transfer belt Maintenance parts To access SyncThru Web ServiceManaging your machine from the website Items Yield AverageTroubleshooting Tips for avoiding paper jamsClearing paper jams Paper feed areaTroubleshooting Multi-purpose tray Fuser unit area Paper exit area Optional tray Understanding display messages Message Explanation Solution Duplex Jam InstallInstall Toner Message Explanation Solution Low Heat ErrorMessage Explanation Solution Replace Fuser Self DiagnosticsTemperature Message Explanation Solution Toner EmptySolving other problems Paper feeding problemsPrinting problems Condition Suggested solutionsCondition Possible cause Suggested solutions Printing quality problems Condition Suggested solutions Light or faded printTo Normal Toner specksCondition Suggested solutions White Spots Condition Suggested solutions Vertical repetitiveVertical lines Color or BlackCondition Suggested solutions Curl or wave Condition Suggested solutions Loose tonerBack of printouts Are dirtyCommon Windows problems Common PostScript problemsProblem Possible Cause Solution Tray option of the InstallableCommon Linux problems Common Macintosh problemsProblem Possible Cause and Solution Problem Suggested solutionsOrdering supplies and accessories AccessoriesHow to purchase SuppliesPrecautions to take when installing accessories Installing accessoriesInstalling a memory module Select Device Settings Activating the added memory in the PS printer propertiesSpecifications Specifications and DescriptionCLP-610 Series CLP-610 Series CLP-660 SeriesCLP-660 Series Specifications Bootp GlossaryISO Index USB Software section Contents Using Windows Postscript Driver Using Your Printer with a Macintosh Installing Printer Software Installing Software for Local PrintingTypical Installation Select Typical installation for a local printer. Click NextCustom Installation Select Custom installation. Click Next Select the components to be installed and click NextInstalling Software for Network Printing Custom Installation Select Custom installation. Click Next Reinstalling Printer Software Select the components you want to reinstall and click Next Removing Printer SoftwareInstalling mono printer driver 12Click OK in the Install From Disk windowPrinting a Document Select your printer driver from the Name drop-down listPrinting to a file PRN Printer SettingsSelect Printers and Faxes Select your printer driver icon Layout Tab Paper TabGraphics Tab Extras Tab Advanced OptionsWatermark OverlayUsing a Favorite Setting Using HelpAbout Tab Printer TabAdvanced Printing Printing Multiple Pages on One Sheet of Paper N-Up PrintingPrinting Posters Printing BookletsPrinting on Both Sides of Paper Printing a Reduced or Enlarged DocumentFitting Your Document to a Selected Paper Size NoneUsing Watermarks Using an Existing WatermarkCreating a Watermark Editing a WatermarkUsing Overlays What is an Overlay?Using a Page Overlay Creating a New Page OverlayUsing Windows PostScript Driver AdvancedSetting Up a Host Computer Setting Up a Client ComputerCheck the Share this printer box Double-clickPrinters and FaxesUnderstanding Smart Panel Opening the Troubleshooting Guide Changing the Smart Panel Program SettingsUsing Printer Settings Utility Using Onscreen Help FileInstalling the Unified Linux Driver Installing the Unified Linux DriverGetting Started Such as Unified Driver Configurator Uninstalling the Unified Linux DriverClick Uninstall Using the Unified Driver Configurator Printers ConfigurationOpening the Unified Driver Configurator Double-clickUnified Driver Configurator on the desktopPorts Configuration Configuring Printer PropertiesClasses Tab Printing from Applications Printing FilesInstalling Software Installing the Printer driverUninstalling the Printer driver Printer driverFor a Network-connected Setting Up the PrinterFor a USB-connected Changing Printer Settings PrintingPrinting a Document LayoutGraphics Printer FeaturesPaper Printing Multiple Pages on One Sheet of Paper Duplex PrintingIndex Setting darkness 16 favorites 18 image mode 16 resolution Rev.5.00
Top Page Image Contents