Samsung CLP-660 Series, CLP-610 Series manual Color, Network

Menu	Description
Setup	PCL
	This menu sets the PCL emulation configuration.
	You can set the font type, symbol type, lines per
	page, and font size.
	•	Typeface: You can select the standard font to
		be used in PCL emulation. PCL1~PCL7's
		interval between letters is fixed, and
		PCL8~PCL45's interval is proportional to the
		font type and font size. You can adjust the font
		size of PCL1~PCL7 using the Pitch item, and
		PCL8~PCL45 can do using Point Size item.
		PCL8~PCL56's interval and font size are fixed.
	•	Symbol: This item selects the symbol set to
		be used in PCL emulation. The symbol is the
		group of numbers, marks, and special signs
		being used when printing letters. Depending
		on the Typeface setting, available symbol sets
		vary.
	•	Point Size: When you select one between
		PCL8 and PCL45 from the Typeface menu,
		you can determine the font size by setting the
		height of the characters in the font.
	•	Courier: This item lets you select the version
		of Courier font to use.
	•	Pitch: When you select one between PCL1
		and PCL7 from the Typeface menu, you can
		determine the font size by setting the number
		of characters that will print in one horizontal
		inch of type. The default value, 10 is the best
		size.
	•	Lines: This item allows you to set vertical
		spacing from 5 to 128 lines for the default
		paper size. The default number of lines may
		differ according to the paper size and printing
		orientation.
	PostScript
	This menu provides you with the Print PS Error
	menu item. You can select whether or not your
	printer prints an error list when a PS error
	occurs. Select On to print PS 3 emulation errors.
	If an error occurs, the job stops processing, the
	error message prints, and the printer flushes the
	job. If this menu is set to Off, the job is flushed
	without an indication of the error.

Color

Menu	Description
Custom Color	This menu allows you to adjust contrast, color by
	color.
	•	Default: Optimizes colors automatically.
	•	Manual Adjust: Allows you to manually adjust
		the color contrast for each cartridge.
	It is recommended to use the Default setting for
	best color quality.
Auto Color Reg.	The machine can automatically adjust the
	engine color alignment for text or graphics.
		Note
		If you have moved the machine, it is
		strongly recommended to operate this
		menu manually.

Network

Menu	Description
TCP/IP	If you are using the TCP/IP protocol for
	networking, select this menu.
	•	DHCP: The DHCP server allots an IP address
		to you automatically.
	•	BOOTP: The BOOTP server allots an IP
		address to you automatically.
	•	Static: You can enter an IP address,
		subnetmask, and gateway manually.
Ethernet Speed	This item allows you to select the communication
	speed for ethernet connection.
Clear Setting	You can clear the network setting you have set.
Network Info.	You can print the network configuration report.

1.9 <Introduction>