Samsung CLP-660 Series Printers basic settings, Altitude Setting after Software Installation

Page 27

Note

•If your machine does not work properly after the installation, try to reinstall the printer driver. See Software section.

•When the printer driver is in installation process, the driver installer detects the locale information of your operating system, and sets the default paper size for your machine. If you use the different Windows locale, you must change the paper size of your machine for matching your commonly used paper size. Go to the printer properties to change the paper size after installation completes.

Printer's basic settings

After installation is complete, you may want to set the printer's default settings. Refer to the next section if you would like to set or change values.

Altitude Setting after Software Installation

The print quality is affected by atmospheric pressure, which is determined by the height of the machine above sea level. The following information will guide you on how to set your machine to the best print quality or best quality of print.

Before you set the altitude value, find the altitude where you are using the machine.

Value

1High 3

2 High 2

3 High 1

4 Normal

1Ensure that you have installed the printer driver with the provided Printer Software CD.

2Double-click the Smart Panel icon on the Windows task bar (or Notification Area in Linux). You can also click Smart Panel on the status bar in Mac OS X.

3Click Printer Setting.

4Click Setting > Altitude Adjustment. Select the appropriate value from the dropdown list, and then click Apply.

Note

If your machine is connected to a network, SyncThru Web Service screen appears automatically. Click Printer Setting > Setup (or Machine Setup) > Altitude Adj. Select the appropriate altitude value, and then click Apply.

Changing the display language

To change the language that appears on the display, refer to the following steps.

1Press Menu on the control panel until you see System Setup on the bottom line of the display.

2Press OK to access System Setup.

3Press the left/right arrow until Language displays.

4Press OK.

5Press the left/right arrow until the language you want displays.

6Press OK.

7Press Stop to return to machine ready mode.

Setting job timeout

1Press Menu on the control panel until you see System Setup on the bottom line of the display.

2Press OK to access System Setup.

3Press the left/right arrow until Job Timeout displays.

4Press OK.

5Press the left/right arrow to select the amount of time the machine will wait.

6Press OK.

7Press Stop to return to machine ready mode.

3.4 <Getting Started>

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Page Page Contact Samsung worldwide Switzerland Contents Installing accessories MaintenanceTroubleshooting Ordering supplies and accessoriesGlossary Index SpecificationsFinding more information About this user’s guideLaser Safety Statement Safety and Regulatory InformationImportant Precautions and Safety Information Environmental and Safety ConsiderationRadio Frequency Emissions Ozone SafetyPower Saver RecyclingCanadian Radio Interference Regulations Declaration of Conformity European CountriesReplacing the Fitted Plug for UK Only OpenSSL LicenseOriginal SSLeay License Introduction Special featuresFront view Machine overviewRear view Control panel overview Understanding the Status LED Status LED with the toner cartridge messagesStatus Description Accessing menus Understanding the menu mapMenu overview Paper Description on each menuInformation LayoutSystem Setup GraphicEmulation Network ColorPrinter driver CLP-610 Series Printer driver featuresSoftware overview Supplied softwareLinux System requirementsPrinter driver CLP-660 Series WindowsSetting up the hardware Setting up the networkGetting Started Supported operating systems Configuring network protocol via the machineInstalling the software Click Printer Setting Printers basic settingsAltitude Setting after Software Installation Setting job timeoutChanging the font setting Using power saving featureSetting the default paper size and type Setting the default trayTo refresh Selecting and loading print media Selecting print mediaGuidelines for selecting and storing print media Type Size Dimensions Weighta Capacityb Specifications on print mediaMedia sizes supported in each mode Guidelines for special print mediaMedia type Guidelines Loading paper TrayLoading paper in the tray 1 or optional tray Changing the size of the paper in the paper tray Multi-purpose tray Tips on using the multi-purpose traySetting the paper size and type Canceling a print job Basic printingPrinting a document Printing a network report MaintenancePrinting a machine configuration report Cleaning your machineMaintenance Expected cartridge life Maintaining the cartridgeRedistributing toner Toner cartridge storageReplacing the toner cartridge Maintenance Replacing the paper transfer belt Items Yield Average Maintenance partsTo access SyncThru Web Service Managing your machine from the websitePaper feed area TroubleshootingTips for avoiding paper jams Clearing paper jamsTroubleshooting Multi-purpose tray Fuser unit area Paper exit area Optional tray Understanding display messages Message Explanation Solution Low Heat Error Message Explanation Solution Duplex JamInstall Install TonerMessage Explanation Solution Toner Empty Message Explanation Solution Replace FuserSelf Diagnostics TemperatureCondition Suggested solutions Solving other problemsPaper feeding problems Printing problemsCondition Possible cause Suggested solutions Toner specks Printing quality problemsCondition Suggested solutions Light or faded print To NormalColor or Black Condition Suggested solutions White SpotsCondition Suggested solutions Vertical repetitive Vertical linesAre dirty Condition Suggested solutions Curl or waveCondition Suggested solutions Loose toner Back of printoutsTray option of the Installable Common Windows problemsCommon PostScript problems Problem Possible Cause SolutionProblem Suggested solutions Common Linux problemsCommon Macintosh problems Problem Possible Cause and SolutionSupplies Ordering supplies and accessoriesAccessories How to purchaseInstalling accessories Precautions to take when installing accessoriesInstalling a memory module Activating the added memory in the PS printer properties Select Device SettingsCLP-610 Series CLP-660 Series SpecificationsSpecifications and Description CLP-610 SeriesCLP-660 Series Specifications Glossary BootpISO Index USB Software section Contents Using Windows Postscript Driver Using Your Printer with a Macintosh Select Typical installation for a local printer. Click Next Installing Printer SoftwareInstalling Software for Local Printing Typical InstallationCustom Installation Select the components to be installed and click Next Select Custom installation. Click NextInstalling Software for Network Printing Custom Installation Select Custom installation. Click Next Reinstalling Printer Software Removing Printer Software Select the components you want to reinstall and click Next12Click OK in the Install From Disk window Installing mono printer driverSelect your printer driver from the Name drop-down list Printing a DocumentPrinter Settings Printing to a file PRNSelect Printers and Faxes Select your printer driver icon Paper Tab Layout TabGraphics Tab Overlay Extras TabAdvanced Options WatermarkPrinter Tab Using a Favorite SettingUsing Help About TabPrinting Multiple Pages on One Sheet of Paper N-Up Printing Advanced PrintingPrinting Booklets Printing PostersNone Printing on Both Sides of PaperPrinting a Reduced or Enlarged Document Fitting Your Document to a Selected Paper SizeEditing a Watermark Using WatermarksUsing an Existing Watermark Creating a WatermarkCreating a New Page Overlay Using OverlaysWhat is an Overlay? Using a Page OverlayAdvanced Using Windows PostScript DriverDouble-clickPrinters and Faxes Setting Up a Host ComputerSetting Up a Client Computer Check the Share this printer boxUnderstanding Smart Panel Using Onscreen Help File Opening the Troubleshooting GuideChanging the Smart Panel Program Settings Using Printer Settings UtilityInstalling the Unified Linux Driver Installing the Unified Linux DriverGetting Started Uninstalling the Unified Linux Driver Such as Unified Driver ConfiguratorClick Uninstall Double-clickUnified Driver Configurator on the desktop Using the Unified Driver ConfiguratorPrinters Configuration Opening the Unified Driver ConfiguratorConfiguring Printer Properties Ports ConfigurationClasses Tab Printing Files Printing from ApplicationsPrinter driver Installing SoftwareInstalling the Printer driver Uninstalling the Printer driverSetting Up the Printer For a Network-connectedFor a USB-connected Layout Changing Printer SettingsPrinting Printing a DocumentPrinter Features GraphicsPaper Duplex Printing Printing Multiple Pages on One Sheet of PaperIndex Setting darkness 16 favorites 18 image mode 16 resolution Rev.5.00
Top Page Image Contents