Samsung SCX-4521FG manual Making Copies on the Document Glass

Making Copies on the Document Glass

1Lift and open the document cover.

2Place the document face down on the document glass and align it at the top left corner of the glass.

NOTE: Make sure that no documents are in the ADF (Automatic Document Feeder). If a document is detected in the ADF, the machine gives it priority over the document on the document glass.

3Close the document cover.

NOTES:

•When you close the document cover, please be careful of any injuries.

•Leaving the cover open while copying may affect copy quality and toner consumption.

•If you are copying a page from a book or magazine, start copying with the cover open.

4Customize the copy settings including number of copies, copy size, darkness, and original type, by using the control panel buttons. See “Setting Copy Options” on page 4.3. To clear the settings, use the Stop/Clear button.

5If necessary, you can use special copy features, such as Poster, Auto Fit, Clone, and ID Card copying.

6Press Start to begin copying.

The display shows the copy processing.

NOTES:

•You can cancel the copy job during an operation. Press Stop/Clear, and the copying will stop.

•Dust on the document glass may cause black spots on the printout. Always keep it clean.

•To get the best scan quality, especially for colored or gray- scaled images, use the document glass.

Making Copies from the Automatic Document Feeder

1Load the document face up into the ADF (Automatic

Document Feeder). You can insert up to 30 sheets at a time. Make sure that the bottom of the document stack matches the paper size marked on the document tray.

2Adjust the document guides to the document size.

4.2 Copying