Samsung SCX-4521FG manual Redistributing Toner, Replacing the Toner Cartridge

Page 55

Redistributing Toner

When the toner cartridge is near the end of its life, white streaks or light printing occurs. The LCD displays the warning message, “[Toner Low]”. You can temporarily reestablish print quality by redistributing the remaining toner in the cartridge. In some case, white streaks or light printing still occurs even after you have redistributed the toner.

1Open the front door.

2Pull the toner cartridge out and remove it from the printer.

3Gently shake the toner cartridge from side to side five or six times to redistribute the toner.

NOTE: If toner gets on your clothing, wipe it off with a dry cloth and wash clothing in cold water. Hot water sets toner into fabric.

8.4 Maintenance

CAUTION: Do not touch the green underside of the toner cartridge. Use the handle on the cartridge to avoid touching this area.

4Reinstall the cartridge and close the front door. Make sure that the cover is securely closed. If it is not firmly closed, printing error may occur when you print.

Replacing the Toner Cartridge

When the display on the control panel shows the warning message, “[Toner Empty]” the toner cartridge has run out but continues printing. For the SCX-4521F, incoming faxes are saved in memory. At this stage, the toner cartridges needs to be replaced.

NOTE: You can set the machine to ignore the “[Toner Empty]” message and to continue printing incoming faxes. See “Ignoring the Toner Empty Message (Only for SCX-4521F)” on page 8.5.

Remove the old toner cartridge and install a new toner cartridge. See “Installing the Toner Cartridge” on page 2.2.

Setting the Notify Toner Option

(Only for SCX-4521F)

If you set the Notify Toner menu option to “On”, your machine automatically sends a fax to your service company or the dealer to notify them. The fax number is preset by your dealer when you bought your machine.

Notification cases are like this:

•When the toner cartridges is low.

•When critical error occured at your machine.

(Error cases: CRU Fuse Error, Low Heat Error, LSU Error.)

•When notification day and notification pages that are preset by your dealer have passed.

1Press Menu on the control panel until “Maintenance” appears on the top line of the display.

2Press the scroll button ( or ) to display “Notify Toner ” on the bottom line and press Enter.

3Enter a four-digit password you want to use, using the

number keypad and press Enter.

(If you select this menu, for the first time after purchasing or after clearing all memory, Re-enter the password to confirm it and press Enter.)

4Press the scroll button ( or ) to change the setting.

Select “On” to enable this feature. Selecting “Off” disables this feature.

5Press Enter to save the selection.

6To return to Standby mode, press Stop/Clear.

Page 54 Page 56
Image 55
Page 54 Page 56
Contents Page About the User’s Guide Contact Samsung worldwide Slovakia Contents Scanning Printing a Document Canceling a Print JobClearing the Memory Cleaning the DrumUse only No.26 AWG or larger telephone line cord Important Precautions and Safety InformationLaser Safety Statement Ozone SafetyRadio Frequency Emissions Mercury SafetyPower Saver RecyclingYou should also know that Ringer Equivalence NumberDeclaration of Conformity European Countries Replacing the Fitted Plug for UK OnlyBritish English American English Wires in the mains lead have the following color codeDifferences Between British and American English NeutralIntroduction Special FeaturesFront View Rear View Understanding Component LocationsThese are the main components of your machine Control Panel Functions Unpacking Getting StartedLeft 3.9 in./100 mm enough space for ventilation Installing the Toner CartridgeSelecting a Location Clearance SpaceLoading Paper Skip this step and proceed to step Making ConnectionsLoad paper with the print side facing up If you have SCX-4321To an extension phone or answering machine Turning the Machine On Linux Driver Installing Printer SoftwarePrograms for Windows Macintosh DriverMacintosh Printer Driver FeaturesLinux Entering Characters Using the Number Keypad Setting the Machine IDSetting Language Setting CountryChanging Numbers or Names Setting the Date and TimeChanging the Clock Mode Keypad Letters and NumbersSpeaker Volume Setting the Paper Size and TypePress On Hook Dial. a dial tone sounds from the speaker Power Save Mode Using the Save ModesSetting the Dial Mode Toner Save ModePaper Type Input Tray/Capacity Paper HandlingSelecting Print Materials Paper Type, Input Sources, and CapacitiesGuidelines for Paper and Special Materials Tray holds 150 sheets of paper Using the TrayUsing the Manual Tray Verifying an Output LocationLoading Paper for Copying CopyingPreparing a Document Load the document face up into the ADF Automatic Adjust the document guides to the document sizeMaking Copies on the Document Glass Making Copies from the Automatic Document FeederReduced/Enlarged Copy Setting Copy OptionsDarkness Original TypeAuto Fit Copying Using Special Copy FeaturesClone Copying Collation CopyingUp or 4 Up Copying ID Card CopyingPoster Copying Setting the Time Out Option Changing the Default SettingsSetting the Favorite Copy Option Printing a Document Canceling a Print JobPrinting a Document Canceling a Print Job Basic PrintingScanning Basics ScanningAvailable Fax Setup Options Changing the Fax Setup optionsOption Description Drpd Mode on On, Off, and On-Err, which prints only when aWill be discarded. Settings range from 0 to 30 mm For more information about using the codeLoading a Document To fax a document using the Automatic Document Feeder ADFTo fax a document from the document glass Mode Recommended for Adjusting the Document ResolutionSending a Fax Automatically Automatic Redialing Sending a Fax ManuallyRedialing the Last Number Confirming TransmissionAbout Receiving Modes Receiving Automatically in Fax ModeReceiving Manually in Tel Mode Receiving Automatically in Ans/ Fax ModeReceiving Faxes Using the Drpd Mode Receiving Manually Using an Extension TelephoneReceiving Faxes in the Memory Group Dialing Sending a Fax using a Speed Dial NumberSetting a Group Dial Number Speed DialingPress Phone Book Searching for a Number in MemoryEditing Group Dial Numbers Searching Sequentially through the MemorySending Broadcast Faxes Printing a Phonebook ListSearching with a Particular First Letter Sending a Priority Fax Sending a Delayed FaxIf you do not want to assign a name, skip this step Adding Documents To a Scheduled Fax Canceling a Scheduled FaxPrinting Reports Using Secure Receiving ModePower Failure Report Using Advanced Fax SettingsChanging Setting Options Advanced Fax Setting OptionsClearing the Memory MaintenanceCleaning the Inside Setting the Machine to be Checked by PhoneCleaning Your Machine Cleaning the OutsideSaving toner Cleaning the Scan UnitMaintaining the Toner Cartridge Toner cartridge storageRedistributing Toner Setting the Notify Toner OptionReplacing the Toner Cartridge Ignoring the Toner Empty Message Cleaning the DrumItems Yield Average Replacing the ADF Rubber Pad Clearing Document Jams TroubleshootingInput Misfeed Manual Tray Clearing Paper JamsExit Misfeed TrayPaper Exit Area Fuser Area or Around the Toner CartridgeDisplay Meaning Suggested solutions Clearing LCD Error MessagesTips for Avoiding Paper Jams Persists, please call for Open Heat ErrorService Power Failure Power has turned offStop/Clear Solving Other ProblemsPaper Feeding Problems Condition Suggested solutionsGuide Printing ProblemsCondition Possible cause Suggested solutions Details, see Software User’sPrinting Quality Problems Condition Copying Problems Scanning Problems Problem Possible Cause and Solution Common Linux ProblemsProblems in Printer Setup Utility Common Macintosh ProblemsSoftware. See Software User’s Guide General Specifications SpecificationsPrinter Specifications Scanner and Copier SpecificationsOverview Facsimile SpecificationsPaper Specifications Using only ITU-T No.1 ChartSupported Sizes of Paper Guidelines for Using PaperPaper Dimensions Weight Capacity Symptom Problem with Paper SolutionEnvelopes Paper SpecificationsPaper Output Capacity Paper Storage EnvironmentEnvelope Storage Envelopes with Double Side SeamsEnvelopes with Adhesive Strips or Flaps Envelope MarginsIndex Error messages 9.4 extension phone, connectSystem requirements Windows Reduced/enlarged copyingSoftware section Contents Sharing the Printer Locally Using Your Printer with a Macintosh Installing Printer Software in Windows Installing Printer Software in WindowsInstalling Printer Software in Windows Select the components you want to reinstall and click Next Reinstalling Printer SoftwareRemoving Printer Software Recommended, Means you can select that certain option but it is notSelect your printer driver from the Name drop-down list Printing to a file PRN Printer SettingsSelect Printers and Faxes Select your printer driver icon Source Layout TabPaper Tab Paper OrientationScaling Printing ResolutionToner Save Mode Graphics TabHigh Altitude Correction Extras TabAbout Tab Printer TabUsing Help Using a Favorite SettingPrinting Multiple Pages on One Sheet of Paper N-Up Printing Advanced PrintingPrinting a Reduced or Enlarged Document Printing PostersFitting Your Document to a Selected Paper Size Editing a Watermark Using WatermarksUsing an Existing Watermark Creating a WatermarkCreating a New Page Overlay Using OverlaysWhat is an Overlay? Using a Page OverlayCheck the Share this printer box Setting Up a Host ComputerSetting Up a Client Computer Sharing the Printer LocallyToner Level Using Smart PanelOpening the Troubleshooting Guide Understanding Smart PanelChanging the Smart Panel Program Settings Uninstalling Samsung SmarThru Scanning Using Samsung SmarThruUsing Samsung SmarThru Using Onscreen Help File Windows Vista Scanning Process with TWAIN- enabled SoftwareScanning Using the WIA Driver Windows XPWhen the welcome screen appears, click Next Using Your Printer in LinuxInstalling the Unified Linux Driver Installing the Unified Linux DriverClick Uninstall Uninstalling the Unified Linux DriverClick Next Click Finish Printers Tab Using the Unified Driver ConfiguratorPrinters Configuration Opening the Unified Driver ConfiguratorSharing Ports Between Printers and Scanners Scanners ConfigurationPorts Configuration Classes TabPrinting from Applications Configuring Printer PropertiesChange the printer and print job properties Printing Files Scanning a DocumentClick Properties Adding Job Type Settings Using the Image ManagerYou can use the following tools to edit the image Tools FunctionUninstalling the Printer driver Using Your Printer with a MacintoshInstalling Software Installing the Printer driverClick Add on the Printer List Setting Up the PrinterFor a Network-connected For a USB-connectedLayout Changing Printer SettingsPrinting Printing a DocumentPaper GraphicsOffers Image Capture You can scan docoments using Image Capture. Macintosh OSScanning Printing Multiple Pages on One Sheet of PaperLinux 27 printer properties, set Macintosh Uninstall, software Macintosh 31 Windows Rev.7.00
Top Page Image Contents