Mitsubishi Electronics WD-60C8 manual Before You Begin, Auto Input Sensing, Connection Types

3 TV Connections

19

Before You Begin

Auto Input Sensing

The TV’s Auto Input Sensing feature automatically rec- ognizes most connections and prompts you to identify the type of device connected. See chapter 2, “TV Setup,” for more on Auto Input Sensing.

Connection Types

Review the connection types available on your input devices and use connections that will give the best video quality. For example, choose HDMI over compo- nent video, and choose component video over S-video or composite video.

Picture Quality

For best picture quality, route signals directly from the input device to the TV; avoid routing video signals through an A/V receiver, for example.

Surround Sound

For best surround sound audio quality, route audio- signal cables or HDMI cables from the source device directly to your A/V receiver or sound system.

IMPORTANT

Accessory items such as cables, adapters, splitters, or combiners required for TV connections are not supplied with the TV. These items are available at many electronics stores.

HDTV Cable Box or Satellite Receiver, DVD Player, or Other Device with Component Video

If your cable box or satellite receiver has an HDMI output, use the connections for HDMI devices described later in this chapter.

Required: RCA component video cables, left/right analog stereo audio cables.

1.Connect RCA-type cables from the Y Pb Pr outputs on the device to the Y Pb Pr inputs on the TV back panel, matching the colored green, blue, and red connections.

2.Connect left (white) and right (red) audio cables from the device to AUDIO L and R on the TV back panel.

3.Cable Box or Satellite Receiver Only: Connect the cable from the outside cable or satellite service to CABLE IN or SATELLITE IN on the cable box or satellite receiver. See your device’s owner’s guide for instructions and cable compatibility.

Note: To hear digital surround sound, connect the digital audio output from the device directly to your digital A/V receiver.

3D

GLASSES EMITTER

Y/VIDEO Pb Pr

R AUDIO L (480i / 480p / 720p / 1080i)

AVR

AUDIO

HDMI

OUTPUT

DVI/PC

INPUT

R

AUDIO

L

VIDEO

VIDEO: 480i/480p/720p/1080i/1080p

AUDIO: PCM STEREO

L

R

AUDIO

L

3

IR-NetCommand

PC: VGA, W-VGA, SVGA, W-SVGA,

INPUT

XGA, W-ZGA, SXGA, 720p/ 1080p

Output / External

HDMI

ANT 2 / AUX

Pb

Pr

2

Controller Input

Y

ANT 1 / MAIN

R

INPUT

1

2

3

Y/VIDEO

Pb

Pr

DIGITAL

R

AUDIO

L

(480i / 480p / 720p / 1080i)

1

INPUT 3

INPUT

S-VIDEO

AUDIO

OUTPUT

57 CBDL QBOFM					
					 *ODPNJOH GSPN
					DBCMF TFSWJDF PS
					TBUFMMJUF EJTI
-	3	:	1C	1S
"6%*0				$"#-& */ PS
$PNQPOFOU WJEFP
				4"5&--*5& */
EFWJDF

Figure 1. Connecting a device with component video outputs