Mitsubishi Electronics WD-60C8 manual Other Menu Options alternate rating system, Time

Page 51

5. TV Menus

51

Lock Menu, continued

Other Menu Options (alternate rating system)

This TV can recognize new rating systems that may come into effect in the future. The Other option remains grayed out until the TV receives a signal using an alternate rating system. Such alternate rating systems will apply only to digital programming received on the ANT 1 and ANT 2 inputs.

Option Name and Description

Lock

On, Off

Enable or disable program blocking.

 

 

 

System Name The rating system available for the channel

 

 

Group

Rating groups available in the rating system shown on the screen. Rating groups are defined by

 

the rating system in effect.

 

 

Rating

Rating restrictions available in the selected rating system and group. Highlight the rating and

 

press ENTER to check (block) or uncheck (allow) rated content.

 

 

 

Time

Blocks all use of the TV during the time period you specify. You must enter a pass code to use the TV when the time lock is in effect.

Lock by Time

On, Off

 

Enable or disable Lock by Time.

 

 

 

 

Lock Time,

To set the lock and unlock times:

 

Unlock Time

1.

Highlight the hour digits for the Lock Time.

 

 

2.

Press

repeatedly to change the hour and associated AM/PM indicator. To move quickly

 

 

through the numbers, just press and hold.

 

3.

Press ENTER to set the hour and highlight the minutes.

 

4.

With the minutes highlighted, press

repeatedly to change the minutes. To move quickly

 

 

through the numbers, just press and hold.

 

5.

Highlight the Unlock Time digits and set the time as described above.

Note: To make Lock by Time active 24 hours a day, make Start Time and Stop Time the same.

Control Panel

On, Off

On locks and Off unlocks the buttons on the TV’s control panel. Use this option if small children

 

may try to press TV buttons.

 

• If the remote control is unavailable, use the TV’s control panel to release the Control Panel

 

Lock. Press and hold the MENU button for over eight seconds.

 

• If the TV is powered off, release the lock as described above. The TV will power on.

 

• To reactivate the lock, you must return to this menu and change the setting to On.

 

 

Image 51
Contents WD-65835, WD-73835 WD-60C8, WD-65C8, WD-73C8WD-60735, WD-65735, WD-73735 WD-65736, WD-73736For Your Records Refer Servicing to Qualified Service PersonnelContents Internal Fans Installation NotesLamp Replacement Cleaning RecommendationsOutdoor Antenna Grounding Replacement PartsSpecial Features of Your TV Package ContentsTV Front Panel Control PanelFront Inputs Lamp Indicator Front-Panel IndicatorsPOWER/TIMER Indicator Status IndicatorComponent Video Input 1, Input TV Back PanelANT 1/ANT 2 Antenna Composite Video Input 1, InputHdmi Cable Categories IR NetCommand Output/External Controller InputHdmi Inputs High-Definition Multimedia Interface Audio L and R Input 1, InputGuidelines for Setting Up and Using Your New Widescreen TV When You First Power On the TVInstalling the Remote Control Batteries Assistance Additional TV SetupTV Operation TV CareMemorizing Channels Initial TV SetupSetting Up TV Inputs When You First Connect a DeviceTips on Auto Sensing and Changing Connected Devices Setup Procedure Setup Procedure for TV InputsDisconnecting an Analog A/V Receiver Auto Input/Auto Output Sensing ScreensWith NetCommand for Hdmi CEC-Enabled Hdmi A/V Receiver Controlling A/V Receiver Sound VolumeWith a Standard TV Setup With NetCommand IR ControlSource device connected directly to the TV Computer Video Connection Audio Video Output Connecting a Computer to the TVThis TV accepts digital computer signals only  Computer Display Formats Using the TV with a Personal ComputerComputer Video Adjustments Image ResolutionPicture Quality Before You BeginAuto Input Sensing Connection Types065 Hdmi and Audio SignalsWall Outlet Cable no cable box Antennas with Separate UHF and VHF LeadsAntenna with a Single Lead VCR to an Antenna or Wall Outlet Cable 57CBDLQBOFM ODPNJOH DBCMFGSPN XbmmVCR Cable box To TV VCR to a Cable Box Audio & VideoOlder Cable Box Audio Video fromDVD player Receiver Sound System Using the TV’s Audio OutputReceiver with Hdmi Output 7SFDFJWFSCBDLQBOFMAudio-Only Device CamcorderSleep Timer Choosing a Viewing SourceTV Tips Adjust Up/Down/Left/Right Navigate menus and change settings Remote ControlRecord/Playback Keys Resetting the Remote ControlLow-Battery Indicator Care of the Remote ControlPress Key Using ChannelViewFeature ChannelView Channel ListingsOn-screen status display Status DisplayAnt 1 TV-PGANT-1 Fav Favorite ChannelsTV Display Format Definitions TV Signals and Display FormatsSignal Definitions DVD Image DefinitionsUSB Photo menu Viewing Camera FilesJpeg Photos and the USB Photo Port Main menuKeys for Jpeg Picture Slide Show Media Setup MenuPhotos and Moving Video as Composite Video Slide ShowTo Watch Regular non-3D Video 3D VideoInitial Set-Up To Watch 3D VideoMain Menu Remote Control Keys for the TV Menu SystemAV Menu Options AV MenuAudio Only On, Off Film Mode Auto, OffVideo Mute On, Off GlobalVideo Menu Options Video MenuImager Vert AdjustmentSharpEdge On, Off Deep FieldSAP Audio MenuAudio Menu Options ANT1/ANT2Captions Menu Options Captions MenuCaptions on Analog Channels Captions on Digital ChannelsSetup Menu Setup Menu Options1 Enter Edit Setup menu, Edit channel optionsSetup menu, Clock options Setup menu, Timer options TimerEnergy Fast Power On Mode Low Power Selection menu When Inputs NetCommand HdmiInputs Menu Inputs Menu OptionsOther Menu Alternate Rating System Lock MenuPass Codes Parent MenuTV-G Parent Menu Options U.S.-based rating systemTV-Y TV-Y7Time Other Menu Options alternate rating systemImportant Note on NetCommand About NetCommand IR ControlAn IR emitter cable is included with the TV IR Emitter PlacementIf the device has no Power OFF key, skip this step Initial NetCommand Setup for Most DevicesPower GuideCH/PAGE Operating NetCommand-Controlled Devices Controlling Most Device TypesSpecial Operation Methods Controlling an A/V Receiver Outside the Guide Inside the GuideBefore You Begin Setting Up NetCommand Control of an A/V ReceiverReceiver Control Power and Volume Setup to Control A/V Receiver Power and VolumeReceiver Control Automatic Audio Switching Audio Switching Setup 1 Audio from TV’s Audio OutputAudio Switching Setup 2 Audio from Source Device Open the Inputs AV Receiver menu AV Receiver menu to set up audio switchingMore About Using an Hdmi Connection Display the Inputs AV Receiver menu Setup to Control Switching to the TV’s Audio OutputTV back panel Optional Analog or Digital audio With Hdmi ConnectionOpen the Inputs Learn menu NetCommand IR Control Device Connected to an A/V ReceiverAted Assign Input column Assign Input1 through Assign Input5Depth Lbs Watts Appendix a SpecificationsBypassing the Parental Lock Appendix B Bypassing the Parental LockThis page intentionally left blank Functions Available for Other A/V Devices Appendix C Programming the Remote ControlCode Verification Programming the Remote ControlDVD CABLE/SAT VCR DVD AudioCD Players Make Code Programming CodesMake Code Cable Boxes Make CodeReceivers Make Code Laser Disc Players Make CodeSatellite Receivers Satellite Receivers Make CodeVCRs Make Code KEC SVA DVD Players Make CodeIRT Lamp Part Number 915B403001 Appendix D Lamp-Cartridge Replacement and CleaningLamp Life To Order a New LampRemoving the Old Lamp Cartridge Lamp-Cartridge ReplacementLamp-Cartridge Filter Cleaning Installing the New Lamp CartridgeAppendix E NetCommand Hdmi Control of CEC Devices Enabling or Disabling the TV’s NetCommand Hdmi ControlConnecting Hdmi Devices to the TV NetCommand Hdmi Control is off Using NetCommand Hdmi Control Resetting Hdmi Control or Removing an Hdmi Device FigureCEC-enabled A/V receiver functions that may be available Appendix F Troubleshooting TV Reset Comparison GuideReset Name When to Use How to Use Resulting Action Service and Customer Support ServiceCustomer Support General TV Operation Symptom Remarks TV Power On/Off Symptom Remarks TV Channels Symptom RemarksPicture Symptom Remarks Indicators Symptom Remarks Symptom RemarksNetCommand IR Control Symptom Remarks Appendix F Troubleshooting Trademark and License Information Mitsubishi TV Software Mitsubishi DLP Projection Television Limited Warranty Warranty91 Index Index93 System Reset MDEAservice@mdea.com
Related manuals
Manual 71 pages 26.25 Kb Manual 71 pages 21.97 Kb