Mitsubishi Electronics WD-60C8 manual TV back panel Optional Analog or

626. NetCommand IR Control (736 and 835 Series TVs)

Setting Up NetCommand Control of an A/V Receiver, continued

EMITTER

L

R

AVR

HDMI

AUDIO

OUTPUT

DVI/PC

INPUT

R

AUDIO

L

VIDEO

VIDEO: 480i/480p/720p/1080i/1080p

AUDIO: PCM STEREO

L

R

AUDIO

L

3

IR-NetCommand

PC: VGA, W-VGA, SVGA, W-SVGA,

INPUT

XGA, W-XGA, SXGA, 720p/ 1080p

Output / External

HDMI

ANT 2 / AUX

Pb

Pr 2

Controller Input

R

Y

1

2

3

ANT 1 / MAIN

INPUT

DIGITAL

Y/ VIDEO

Pb

Pr

AUDIO

1

OUTPUT

DIGITAL

R

AUDIO

L

(480i / 480p / 720p / 1080i)

INPUT

S-VIDEO

INPUT 3

AUDIO

OUTPUT

TV back panel

Optional
analog or		A/V receiver
digital audio
		with HDMI
connection
L R AUDIO		output
DIGITAL	HDMI OUT
		VCR
High-definition
DVD player	DVD player
Cable box

Multiple video inputs on a single HDMI cable. You can connect multiple video devices to an A/V receiver that has an HDMI output. The optional audio connection allows you to hear, through the A/V receiver, devices connected to the TV only.

4.Power on the A/V receiver.

5.Set the TV’s remote control slide switch to the TV position and power on the TV if needed.

6.When the Auto Input Sensing screen displays, select device name AVR.

Setup to Control A/V Receiver Power and Volume

Perform the steps under “A/V Receiver Control: Power and Volume,” page 58.

Setup to Control Switching to the TV’s Audio Output

If you have used one of the optional audio connec- tions to the TV’s AVR AUDIO OUTPUT or DIGITAL AUDIO OUTPUT jacks, set up NetCommand to control switching to the TV audio input. Perform the steps under “Audio Switching Setup 1: Automatic A/V Receiver Switching to the TV Audio Input,” page 60.

Setup to Control Automatic Audio and Video Switching via HDMI

Follow these steps if you wish NetCommand to control switching of A/V receiver video as well as audio inputs over an HDMI cable. When this setup is complete, you can use the TV’s Input Selection menu to select a video device connected to the A/V receiver. You can also perform additional NetCommand setup to control devices connected to the A/V receiver.

1.Display the Inputs > AV Receiver menu.

Note: The labels Input1 through Input5 in the Learn column are names used by the TV to uniquely identify A/V receiver inputs.

2.With the highlight in the Learn column, highlight one of the Input labels Input2 through Input5; it is recommended you leave Input1 reserved for TV Audio.

1

4

3

3

2

AV Receiver menu for audio and video switching with HDMI output

1The Learn column lists “learnable” keys from the A/V receiver’s remote control.

2Input1 through Input5 are arbitrary names used by the TV to uniquely identify “learnable” A/V receiver inputs.

3A check mark next to a key name indicates it has been “learned” by NetCommand.

4The Assign Input column provides a list of possible device types. Use this list to select the device type connected to the associated A/V receiver input. The assigned device name will appear in the Input Selection menu.