Mitsubishi Electronics WD-60C8 TV Back Panel, ANT 1/ANT 2 Antenna, Composite Video Input 1, Input

1. Television Overview 9

TV Back Panel

11

3D

GLASSES EMITTER

				IR NetCommand Output/
				External Controller Input
10	9	4	8	available on 736 and 835
				series models.

	AVR
	AUDIO
	OUTPUT	DVI/PC		INPUT		R	AUDIO	L	VIDEO
		R	AUDIO		L					3
	L									INPUT	IR-NetCommand R
											Output / External
ANT 2 / AUX											Controller Input
	R				Y		Pb		Pr	2
ANT 1 / MAIN										INPUT
					Y/VIDEO		Pb		Pr
	DIGITAL	R	AUDIO		L	(480i / 480p / 720p / 1080i)				1	INPUT 3
										INPUT
											S-VIDEO
	AUDIO
	OUTPUT

1 2 3 9 4 5 5 6

HDMI

VIDEO: 480i/480p/720p/1080i/1080p

AUDIO: PCM STEREO

PC: VGA, W-VGA, SVGA, W-SVGA, XGA, W-XGA, SXGA, 720p/ 1080p

	HDMI
1	2	3

7

1. ANT 1/ANT 2 (Antenna)

If you are connecting an antenna or direct cable service without a cable box, connect the main antenna or cable source to ANT 1. Use ANT 2 for a second source.

ANT 1 and ANT 2 can each receive digital and analog over-the-air channels from a VHF/UHF antenna or non- scrambled digital/analog cable source.

4. Composite Video (INPUT 1, INPUT 3)

Use the VIDEO jacks to connect a VCR, DVD player, standard satellite receiver, or other A/V device to the TV. Use the adjacent AUDIO R and L inputs for INPUT 1 or INPUT 3 if you wish to send audio to the TV. Note that the INPUT 3 composite video jack is automatically disabled when you connect to S-VIDEO(item 6).

2. AVR AUDIO OUTPUT

Use AVR AUDIO OUTPUT to send analog audio of the program currently shown on the screen to an analog A/V surround sound receiver or stereo system. Digital audio from digital channels and HDMI devices is con- verted to analog audio by the TV. This is the only audio connection needed between it and the TV if using an analog A/V receiver or stereo system.

5. Component Video (INPUT 1, INPUT 2)

Y Pb Pr Component Video (480i/480p/720p/1080i) Use these jacks to connect devices with component video outputs, such as DVD players, external HDTV receivers, or compatible video game systems. Use the adjacent AUDIO R and L jacks for INPUT 1 or INPUT 2 if you wish to send audio to the TV. See Appendix A specifications for signal compatibility.

3. DIGITAL AUDIO OUTPUT

This output sends Dolby Digital or PCM digital audio to your digital A/V surround sound receiver. Analog audio from analog channels and devices and HDMI devices is converted by the TV to PCM digital audio. If you have a digital A/V receiver, in most cases this is the only audio connection needed between the TV and your A/V receiver.

6. S-VIDEO (INPUT 3)

Connect an S-Video device to this input. Use the AUDIO R and L jacks for INPUT 3 (item 9) if you wish to send audio to the TV.