Mitsubishi Electronics WD-60C8 manual Hdmi Inputs High-Definition Multimedia Interface

Page 10

101. Television Overview

TV Back Panel, continued

7.HDMI™ Inputs (High-Definition Multimedia Interface)

The HDMI inputs support uncompressed standard and high-definition digital video formats and PCM digital stereo audio.

Use the HDMI inputs to connect to CEA-861 HDMI com- pliant devices such as a high-definition receiver or DVD player. These inputs support 480i, 480p, 720p, 1080i, and 1080p video formats.

Mitsubishi recommends you use category 2 HDMI cables, also called high-speed HDMI cables, to connect HDMI

1.3source devices. High-speed category 2 cables bring you the full benefits of Deep Color and x.v.Color.

These HDMI inputs can also accept digital DVI video signals. To connect a device’s DVI output to the TV’s HDMI input, use an HDMI-to-DVI adapter or cable plus analog audio cables. Connect the analog audio cables to the DVI/PC INPUT AUDIO jacks (item 10) on the TV to receive left and right stereo audio from your DVI device.

The TV’s HDMI inputs are compatible with many DVI-D and HDMI computer video signals. For additional infor- mation on PC compatibility, see “Using the TV with a Personal Computer,” page 17, and Appendix A, “Specifi- cations,” page 64.

These inputs are HDCP (High-Bandwidth Digital Copy Protection) compliant.

These inputs are certified for proper interop- erability with other products certified by Simplay.

8.IR NetCommand Output/External Controller Input

736 or 835 series TV. IR emitters connected to this jack are used by the TV’s NetCommand system to send control signals to external IR remote-controlled devices such as cable boxes, VCRs, DVD players, satellite receivers and audio receivers.

When NetCommand is not being used, this jack can be switched to receive wired IR control signals from external system controllers. To switch this jack for use as an input, connect the external controller’s IR output to this jack, then:

1.Press MENU to display the TV menu.

2.Enter the number sequence 2, 4, 7, 0 to display the Installer menu.

3.Highlight the WIRED IR selection and press ENTER to change the setting from OFF to ON.

To revert to NetCommand control:

1.Disconnect the IR device.

2.Press MENU to display the TV menu.

HDMI Cable Categories

HDMI cables are available as Category 1 and Cat- egory 2 types.

Category 2 Cables (also called high-speed HDMI cables). Newer, HDMI 1.3-compliant DVD players, video games, and set-top boxes require Category 2 cables, suitable for clock frequen- cies up to 340 MHz or data rates of up to 10.2 gigabits per second. Use category 2 cables for high-speed 1080p HD signals carrying extended color encodings (i.e., 30 or more bits, also called Deep Color). Category 2 cables are also suitable for standard HDTV signals.

Category 1 Cables (also called standard HDMI cables). Category 1 cables may be unmarked. They are suitable for standard HDTV 720p, 1080i, and 1080p signals with 8-bit color depth. Use category 1 cables for clock frequencies up to 74.25 MHz or data rates of up to 2.23 gigabits per second.

3.Enter the number sequence 2, 4, 7, 0 to display the Installer menu.

4.Highlight the WIRED IR selection and press ENTER to change the setting from ON to OFF.

Note: When the WIRED IR option is set to ON (control by an external device), the Low Power setting for Energy Mode is unavailable.

9. AUDIO L and R (INPUT 1, INPUT 3)

These are analog stereo inputs shared by more than one video input.

INPUT 1 stereo audio jacks are for use with INPUT 1 composite video (single yellow cable) or component video (Y Pb Pr cables).

INPUT 3 stereo audio jacks are for use with INPUT 3 composite video or S-Video.

10.DVI/PC INPUT AUDIO

Use the DVI/PC INPUT AUDIO jack when connecting a DVI device to one of the TV’s HDMI inputs using a DVI-to-HDMI cable. These jacks allow you to send left and right analog audio from your computer or other DVI device to the TV.

11. 3D GLASSES EMITTER

Use this jack to connect the special IR emitter supplied with 3D glasses. The emitter will send a signal that synchronizes your 3D glasses with the screen display.

Image 10
Contents WD-65736, WD-73736 WD-60C8, WD-65C8, WD-73C8WD-60735, WD-65735, WD-73735 WD-65835, WD-73835Refer Servicing to Qualified Service Personnel For Your RecordsContents Cleaning Recommendations Installation NotesLamp Replacement Internal FansReplacement Parts Outdoor Antenna GroundingPackage Contents Special Features of Your TVControl Panel TV Front PanelFront Inputs Status Indicator Front-Panel IndicatorsPOWER/TIMER Indicator Lamp IndicatorComposite Video Input 1, Input TV Back PanelANT 1/ANT 2 Antenna Component Video Input 1, InputAudio L and R Input 1, Input IR NetCommand Output/External Controller InputHdmi Inputs High-Definition Multimedia Interface Hdmi Cable CategoriesWhen You First Power On the TV Guidelines for Setting Up and Using Your New Widescreen TVInstalling the Remote Control Batteries TV Care Additional TV SetupTV Operation AssistanceWhen You First Connect a Device Initial TV SetupSetting Up TV Inputs Memorizing ChannelsAuto Input/Auto Output Sensing Screens Setup Procedure Setup Procedure for TV InputsDisconnecting an Analog A/V Receiver Tips on Auto Sensing and Changing Connected DevicesWith NetCommand IR Control Controlling A/V Receiver Sound VolumeWith a Standard TV Setup With NetCommand for Hdmi CEC-Enabled Hdmi A/V ReceiverSource device connected directly to the TV   Connecting a Computer to the TVThis TV accepts digital computer signals only Computer Video Connection Audio Video OutputImage Resolution Using the TV with a Personal ComputerComputer Video Adjustments Computer Display FormatsConnection Types Before You BeginAuto Input Sensing Picture QualityHdmi and Audio Signals 065Antennas with Separate UHF and VHF Leads Wall Outlet Cable no cable boxAntenna with a Single Lead 57CBDLQBOFM ODPNJOH DBCMFGSPN Xbmm VCR to an Antenna or Wall Outlet CableVCR Audio Video from VCR to a Cable Box Audio & VideoOlder Cable Box Cable box To TV7SFDFJWFSCBDLQBOFM Receiver Sound System Using the TV’s Audio OutputReceiver with Hdmi Output DVD playerCamcorder Audio-Only DeviceChoosing a Viewing Source Sleep TimerTV Tips Remote Control Adjust Up/Down/Left/Right Navigate menus and change settingsCare of the Remote Control Resetting the Remote ControlLow-Battery Indicator Record/Playback KeysChannelView Channel Listings Using ChannelViewFeature Press KeyTV-PG Status DisplayAnt 1 On-screen status displayFav Favorite Channels ANT-1DVD Image Definitions TV Signals and Display FormatsSignal Definitions TV Display Format DefinitionsMain menu Viewing Camera FilesJpeg Photos and the USB Photo Port USB Photo menuSlide Show Media Setup MenuPhotos and Moving Video as Composite Video Keys for Jpeg Picture Slide ShowTo Watch 3D Video 3D VideoInitial Set-Up To Watch Regular non-3D VideoRemote Control Keys for the TV Menu System Main MenuAV Menu AV Menu OptionsGlobal Film Mode Auto, OffVideo Mute On, Off Audio Only On, OffVideo Menu Video Menu OptionsDeep Field Vert AdjustmentSharpEdge On, Off ImagerANT1/ANT2 Audio MenuAudio Menu Options SAPCaptions on Digital Channels Captions MenuCaptions on Analog Channels Captions Menu OptionsSetup Menu Options Setup Menu1 Enter Setup menu, Edit channel options EditSetup menu, Clock options Timer Setup menu, Timer optionsEnergy Fast Power On Mode Low Power Inputs Menu Options When Inputs NetCommand HdmiInputs Menu Selection menuParent Menu Lock MenuPass Codes Other Menu Alternate Rating SystemTV-Y7 Parent Menu Options U.S.-based rating systemTV-Y TV-GOther Menu Options alternate rating system TimeAbout NetCommand IR Control Important Note on NetCommandIR Emitter Placement An IR emitter cable is included with the TVInitial NetCommand Setup for Most Devices If the device has no Power OFF key, skip this stepGuide PowerCH/PAGE Controlling Most Device Types Operating NetCommand-Controlled DevicesSpecial Operation Methods Controlling an A/V Receiver Inside the Guide Outside the GuideSetup to Control A/V Receiver Power and Volume Setting Up NetCommand Control of an A/V ReceiverReceiver Control Power and Volume Before You BeginAudio Switching Setup 1 Audio from TV’s Audio Output Receiver Control Automatic Audio SwitchingAudio Switching Setup 2 Audio from Source Device AV Receiver menu to set up audio switching Open the Inputs AV Receiver menuMore About Using an Hdmi Connection Digital audio With Hdmi Connection Setup to Control Switching to the TV’s Audio OutputTV back panel Optional Analog or Display the Inputs AV Receiver menuAssign Input5 NetCommand IR Control Device Connected to an A/V ReceiverAted Assign Input column Assign Input1 through Open the Inputs Learn menuAppendix a Specifications Depth Lbs WattsAppendix B Bypassing the Parental Lock Bypassing the Parental LockThis page intentionally left blank Appendix C Programming the Remote Control Functions Available for Other A/V DevicesCABLE/SAT VCR DVD Audio Programming the Remote ControlDVD Code VerificationCable Boxes Make Code Programming CodesMake Code CD Players Make CodeLaser Disc Players Make Code Receivers Make CodeSatellite Receivers Make Code Satellite ReceiversVCRs Make Code KEC DVD Players Make Code SVAIRT To Order a New Lamp Appendix D Lamp-Cartridge Replacement and CleaningLamp Life Lamp Part Number 915B403001Installing the New Lamp Cartridge Lamp-Cartridge ReplacementLamp-Cartridge Filter Cleaning Removing the Old Lamp CartridgeEnabling or Disabling the TV’s NetCommand Hdmi Control Appendix E NetCommand Hdmi Control of CEC DevicesConnecting Hdmi Devices to the TV NetCommand Hdmi Control is off Resetting Hdmi Control or Removing an Hdmi Device Figure Using NetCommand Hdmi ControlCEC-enabled A/V receiver functions that may be available TV Reset Comparison Guide Appendix F TroubleshootingReset Name When to Use How to Use Resulting Action Service Service and Customer SupportCustomer Support General TV Operation Symptom Remarks TV Channels Symptom Remarks TV Power On/Off Symptom RemarksPicture Symptom Remarks Symptom Remarks Indicators Symptom RemarksNetCommand IR Control Symptom Remarks Appendix F Troubleshooting Trademark and License Information Mitsubishi TV Software Mitsubishi DLP Projection Television Limited Warranty Warranty91 Index Index93 MDEAservice@mdea.com System Reset
Related manuals
Manual 71 pages 26.25 Kb Manual 71 pages 21.97 Kb