Mitsubishi Electronics WD-60C8 manual Service and Customer Support

Page 81

Appendices81

Appendix F: Troubleshooting, continued

Reset Name

 

When to Use

 

How to Use

 

Resulting Action

System Reset

 

If the TV does not turn on

 

Press the SYSTEM RESET button on the

 

The TV will turn off and the green LED

 

 

 

 

 

or off, does not respond

 

control panel.

 

will flash quickly for about one minute.

 

 

to the remote control or

 

 

 

When the green LED stops flashing,

 

 

control-panel buttons, or

 

 

 

you may turn on the TV. The changes

 

 

has audio but no video.

 

 

 

you made most recently, before using

 

 

 

 

 

 

SYSTEM RESET, may be lost. Changes

 

 

 

 

 

 

you made previously, however, are

 

 

 

 

 

 

not lost.

 

 

 

 

 

 

 

TV Reset

 

To reset all consumer-

 

1. While viewing the TV, press MENU to

 

The TV will start the initialization

IMPORTANT:

 

accessible settings

 

display the TV Main menu.

 

process. The TV will then turn off

Use this reset

 

and all memories to the

 

2. With the Main menu displayed,

 

and the front green LED will start

only if all other

 

original factory defaults.

 

 

flashing. When the LED stops

 

 

press number keys 1 2 3 to display

 

resets have been

 

CAUTION: All owner-

 

the Reset menu.

 

flashing, you can turn the TV on

unsuccessful.

 

 

 

again. The Parental Lock Pass code

 

performed setups and

 

3. READ THE ON-SCREEN

 

 

 

 

 

will remain unaffected, but all other

 

 

adjustments will be

 

 

 

 

 

WARNING AND INSTRUCTIONS.

 

memories and settings outlined in

 

 

erased.

 

 

 

 

 

• If you do not wish to use this

 

this Owner’s Guide will need to be

 

 

 

 

 

 

 

 

 

reset, press EXIT or MENU to

 

set again.

 

 

 

 

 

 

 

 

 

 

back out.

 

 

 

 

 

 

• If you do wish to use the

 

 

 

 

 

 

reset, press ENTER to erase all

 

 

 

 

 

 

memories and settings.

 

 

 

 

 

 

 

 

 

Service and Customer Support

Service

If you are unable to correct a problem with your TV, consult your Mitsubishi dealer or Mitsubishi Con- sumer Relations at (800) 332-2119.

DO NOT adjust any controls other than those described in this Owner’s Guide.

DO NOT remove the protective back cover of your

TV.

Customer Support

To order replacement or additional remote controls, lamp cartridges, or Owner’s Guides,

visit our website at www.mitsuparts.com or call

(800) 553-7278.

For questions:

Call Consumer Relations at 800-332-2119. E-mail: MDEAservice@mdea.com Website: www.mitsubishi-tv.com

Important

All lamps replaced under warranty must be returned to Mitsubishi where they will be inspected for defect verification.

Image 81
Contents WD-60735, WD-65735, WD-73735 WD-60C8, WD-65C8, WD-73C8WD-65736, WD-73736 WD-65835, WD-73835For Your Records Refer Servicing to Qualified Service PersonnelContents Lamp Replacement Installation NotesCleaning Recommendations Internal FansOutdoor Antenna Grounding Replacement PartsSpecial Features of Your TV Package ContentsTV Front Panel Control PanelFront Inputs POWER/TIMER Indicator Front-Panel IndicatorsStatus Indicator Lamp IndicatorANT 1/ANT 2 Antenna TV Back PanelComposite Video Input 1, Input Component Video Input 1, InputHdmi Inputs High-Definition Multimedia Interface IR NetCommand Output/External Controller InputAudio L and R Input 1, Input Hdmi Cable CategoriesGuidelines for Setting Up and Using Your New Widescreen TV When You First Power On the TVInstalling the Remote Control Batteries TV Operation Additional TV SetupTV Care AssistanceSetting Up TV Inputs Initial TV SetupWhen You First Connect a Device Memorizing ChannelsDisconnecting an Analog A/V Receiver Setup Procedure Setup Procedure for TV InputsAuto Input/Auto Output Sensing Screens Tips on Auto Sensing and Changing Connected DevicesWith a Standard TV Setup Controlling A/V Receiver Sound VolumeWith NetCommand IR Control With NetCommand for Hdmi CEC-Enabled Hdmi A/V ReceiverSource device connected directly to the TV This TV accepts digital computer signals only Connecting a Computer to the TV  Computer Video Connection Audio Video OutputComputer Video Adjustments Using the TV with a Personal ComputerImage Resolution Computer Display FormatsAuto Input Sensing Before You BeginConnection Types Picture Quality065 Hdmi and Audio SignalsWall Outlet Cable no cable box Antennas with Separate UHF and VHF LeadsAntenna with a Single Lead VCR to an Antenna or Wall Outlet Cable 57CBDLQBOFM ODPNJOH DBCMFGSPN XbmmVCR Older Cable Box VCR to a Cable Box Audio & VideoAudio Video from Cable box To TVReceiver with Hdmi Output Receiver Sound System Using the TV’s Audio Output7SFDFJWFSCBDLQBOFM DVD playerAudio-Only Device CamcorderSleep Timer Choosing a Viewing SourceTV Tips Adjust Up/Down/Left/Right Navigate menus and change settings Remote ControlLow-Battery Indicator Resetting the Remote ControlCare of the Remote Control Record/Playback KeysFeature Using ChannelViewChannelView Channel Listings Press KeyAnt 1 Status DisplayTV-PG On-screen status displayANT-1 Fav Favorite ChannelsSignal Definitions TV Signals and Display FormatsDVD Image Definitions TV Display Format DefinitionsJpeg Photos and the USB Photo Port Viewing Camera FilesMain menu USB Photo menuPhotos and Moving Video as Composite Video Media Setup MenuSlide Show Keys for Jpeg Picture Slide ShowInitial Set-Up 3D VideoTo Watch 3D Video To Watch Regular non-3D VideoMain Menu Remote Control Keys for the TV Menu SystemAV Menu Options AV MenuVideo Mute On, Off Film Mode Auto, OffGlobal Audio Only On, OffVideo Menu Options Video MenuSharpEdge On, Off Vert AdjustmentDeep Field ImagerAudio Menu Options Audio MenuANT1/ANT2 SAPCaptions on Analog Channels Captions MenuCaptions on Digital Channels Captions Menu OptionsSetup Menu Setup Menu Options1 Enter Edit Setup menu, Edit channel optionsSetup menu, Clock options Setup menu, Timer options TimerEnergy Fast Power On Mode Low Power Inputs Menu When Inputs NetCommand HdmiInputs Menu Options Selection menuPass Codes Lock MenuParent Menu Other Menu Alternate Rating SystemTV-Y Parent Menu Options U.S.-based rating systemTV-Y7 TV-GTime Other Menu Options alternate rating systemImportant Note on NetCommand About NetCommand IR ControlAn IR emitter cable is included with the TV IR Emitter PlacementIf the device has no Power OFF key, skip this step Initial NetCommand Setup for Most DevicesPower GuideCH/PAGE Operating NetCommand-Controlled Devices Controlling Most Device TypesSpecial Operation Methods Controlling an A/V Receiver Outside the Guide Inside the GuideReceiver Control Power and Volume Setting Up NetCommand Control of an A/V ReceiverSetup to Control A/V Receiver Power and Volume Before You BeginReceiver Control Automatic Audio Switching Audio Switching Setup 1 Audio from TV’s Audio OutputAudio Switching Setup 2 Audio from Source Device Open the Inputs AV Receiver menu AV Receiver menu to set up audio switchingMore About Using an Hdmi Connection TV back panel Optional Analog or Setup to Control Switching to the TV’s Audio OutputDigital audio With Hdmi Connection Display the Inputs AV Receiver menuAted Assign Input column Assign Input1 through NetCommand IR Control Device Connected to an A/V ReceiverAssign Input5 Open the Inputs Learn menuDepth Lbs Watts Appendix a SpecificationsBypassing the Parental Lock Appendix B Bypassing the Parental LockThis page intentionally left blank Functions Available for Other A/V Devices Appendix C Programming the Remote ControlDVD Programming the Remote ControlCABLE/SAT VCR DVD Audio Code VerificationMake Code Programming CodesCable Boxes Make Code CD Players Make CodeReceivers Make Code Laser Disc Players Make CodeSatellite Receivers Satellite Receivers Make CodeVCRs Make Code KEC SVA DVD Players Make CodeIRT Lamp Life Appendix D Lamp-Cartridge Replacement and CleaningTo Order a New Lamp Lamp Part Number 915B403001Lamp-Cartridge Filter Cleaning Lamp-Cartridge ReplacementInstalling the New Lamp Cartridge Removing the Old Lamp CartridgeAppendix E NetCommand Hdmi Control of CEC Devices Enabling or Disabling the TV’s NetCommand Hdmi ControlConnecting Hdmi Devices to the TV NetCommand Hdmi Control is off Using NetCommand Hdmi Control Resetting Hdmi Control or Removing an Hdmi Device FigureCEC-enabled A/V receiver functions that may be available Appendix F Troubleshooting TV Reset Comparison GuideReset Name When to Use How to Use Resulting Action Service and Customer Support ServiceCustomer Support General TV Operation Symptom Remarks TV Power On/Off Symptom Remarks TV Channels Symptom RemarksPicture Symptom Remarks Indicators Symptom Remarks Symptom RemarksNetCommand IR Control Symptom Remarks Appendix F Troubleshooting Trademark and License Information Mitsubishi TV Software Mitsubishi DLP Projection Television Limited Warranty Warranty91 Index Index93 System Reset MDEAservice@mdea.com
Related manuals
Manual 71 pages 26.25 Kb Manual 71 pages 21.97 Kb