Mitsubishi Electronics DX-TL1600EM Basic Operations, How to use JOG dial and Shuttle ring

Page 10

Basic Operations

■How to use JOG dial and SHUTTLE ring

The JOG/SHUTTLE is used in the various Menus and for special playback features. In the Menu process, the Jog dial is used to navigate through the units Menus and Sub- menus. It is also used to change the individual Menu settings.The SHUTTLE is used to select a specific Menu and to select the needed entry in the individual Menu set- tings. Follow the example below to learn how to use the JOG/SHUTTLE in a Menu application.

♦Setting the character size

Example: Setting the CHARACTER SIZE to “LARGE” (the default setting is “SMALL”).

1.Press the SET UP button on the front of the Unit.

•The <MENU SETTING> menu will appear.

<MENU SETTING>￿

@TIME DATE DISPLAY￿ MPX DISPLAY￿ TIMER PROGRAM

2.Make sure that the cursor is set to the TIME DATE DISPLAY and turn the SHUTTLE ring to the right.

•Turning the SHUTTLE ring to the right displays the next menu.

SHUTTLE ring

3.Turn the JOG dial to select the CHARACTER SIZE.

•Turning the JOG dial to the right moves the cursor downward. Turning the JOG dial to the left moves the cursor upward.

JOG dial

4.Turn the SHUTTLE ring to the right to flash the sub-item.

•The sub-item “SMALL” will start flashing.

<TIME DATE DISPLAY>￿

DISPLAY MODE￿

1￿

@CHARACTER SIZE￿

SMALL￿

CLOCK LOCATION

OFF

Example: Exiting the <TIME DATE DISPLAY> menu after setting the character size.

1.Make sure that the sub-item of the selected item is not flashing and changed correctly.

•If the sub-item is flashing, that item is not entered. See steps 4 on the left and enter the setting.

<TIME DATE

DISPLAY>￿

DISPLAY MODE￿

1￿

@CHARACTER

SIZE￿

LARGE￿

CLOCK LOCATION

OFF

 

 

 

•To set additional settings or to confirm the settings,turning the SHUTTLE ring once to the left displays the previous menu.

<MENU SETTING>￿

@TIME DATE DISPLAY￿ MPX DISPLAY￿ TIMER PROGRAM

2.Turn the SHUTTLE ring twice to the left .

•The display will return to the present time display.

•Pressing the MENU button which is pressed to display the MAIN MENU also returns the menu display to the present time display.

INFO

SET UP

COPY

SEARCH

MENU

INFORMATION

There are 4 different types of MAIN MENU as shown below:

1)The <MENU SETTING> menu (press the SET UP button to display the menu).

<MENU SETTING>￿

@TIME DATE DISPLAY￿

￿

MPX DISPLAY ￿

TIMER PROGRAM￿

NORMAL REC SETTING￿

A-REC/M-DET SETTING￿

DATA CLEAR SELECTION￿

COMMUNICATION SETTING￿

REAR TERMINAL￿

SERVICE￿

INITIAL SET UP

While the sub-item is flashing, the menu display will not disappear when you press the SET UP but- ton.

5.Turn the JOG dial to change the sub-item to “LARGE”.

•The “LARGE” will start flashing.

<TIME DATE DISPLAY>￿

DISPLAY MODE￿

1￿

@CHARACTER SIZE￿

LARGE￿

CLOCK LOCATION

OFF

2)The <SEARCH SELECTION> menu (press the SEARCH button to display the menu).

<SEARCH SELECTION>￿ @SELECTION CAMERA NO.ALL￿ TIME DATE SEARCH￿ INDEX SEARCH￿

SKIP SEARCH￿ ALARM LIST SEARCH￿

￿

￿

JUMP TO START POINT￿

￿

6.Turn the SHUTTLE ring to the right to enter the selection.

• The sub-item will stop flashing.

<TIME DATE

DISPLAY>￿

DISPLAY MODE￿

1￿

@CHARACTER

SIZE￿

LARGE￿

CLOCK LOCATION

OFF

 

 

 

♦Exiting the menu

The following explains how to exit the menu using JOG dial and the SHUTTLE ring.

3)The <INFORMATION> menu (press the INFO button to display the menu).

<INFORMATION>￿

 

@RECORDED PERIOD￿

 

CONNECTED SCSI DEVICE￿

￿

 

￿

 

￿

 

￿

 

<ELAPSED TIME>￿

2H￿

MAIN

ARCHIVE

0H￿

COPY

0H

•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••

••••••••••••••

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents DX-TL1600EM Features Unplug the Power Cord During a Long Absence Contents Communication settings Major operations and their functions Play Device button Play Device indicatorsPlay Mode buttons Play buttonMajor operations and their functions Terminals Basic Operations How to use JOG dial and Shuttle ringSetting the character size Exiting the menuPresent time display Setting the present timeDaylight saving Camera mark will be shown on the present time dis- playMultiplexer functions Basic OperationsBasic recording Example Choose Select REC Mode B the default setting is a Setting the maximum recording fieldsPress the SET UP button to exit settings Check the estimated recording timePress the REC button Setting the define groupPress the Stop button to stop recording Time date search Basic playbackBasic searching function Ton on the front of the unitPress the Search button to clear the Time Date Search menu MAN Set the start time and end time of copying manuallyTurn the Shuttle ring to the right to start copying Language selection settingYou can copy the data even during Recording Display will return to the present time displayTurning ON/OFF this Unit by peripheral source ConnectionsAttaching the ferrite core Connection when using several peripheral recording devices Alarm Recording ConnectionConnecting with peripheral recording devices Peripheral devices to be connectedExample Installing a 9GB hard disk drive to ID1 Initial settingsHow to install an external hard disk drive Confirming the connected deviceSetting this unit to delay the boot up time Press the Power button againMain Menu Menu functionsSUB Menu Operations Menu functions From **-**-** ****** toSetting Display Mode How to set up / Various settingsHow to display menus Setting character sizeVarious settings None No signal is emitted from the Call OUT terminal Capacity remain settingCall OUT setting Be changed as followsPower Failure list Service menu settingBuzzer setting Resetting the Archive PointerIM-CHECK Mode setting Initializing menusArchive medium overwrite setting Initial set upClock setting HDD repeat recordingArchive Data setting Auto-eject settingExample Setting Auto Eject to OFF the default is on Initial SET UP menu will be displayedFIFO/OVERWRITE Mode setting Backing up a data block containing the alarm recordBacking up a small alarm record Motion Detection settingValues they will remain 2S Information menuElapsed time display Showing the recorded periodCommands Quick settingRDD Menu Data Loading setting Menu Data Saving RDD setting Turn the Shuttle ring twice to the rightImage quality setting Various recording settingsVarious recording settings Maximum recording fields settingChanged as follows Various recording settingsWhen the is assigned, the camera is disabled Will be changed as followsPre-alarm recording setting Tection setting in the Initial SET UP menu is onCamera Alarm Rec setting Ground the Alarm in terminalSelection camera no DET settingCH. motion detection setting Motion menu will appearSensitivity setting Setting the detection maskTurn the Shuttle ring to the left to finish setting To finish setting, turn the Shuttle ring to the left Motion threshold settingTest mode setting Test Mode menu will appearMultiplexer functions How to use the Zoom buttonAge will appear pixelized when enlarged Ing the SPLIT/SEQUENCE buttonMultiplexer functions How to use the camera number buttonsSPLIT/SEQUENCE button Split 9 Screen setting Screen SW Pattern settingsSplit 4 Screen setting Multiplexer displaySequence setting Please change settingsSplit 16 Screen setting Image quality of split screenMaximum of 30 seconds can be set Camera title settingDisplaying the title Selected pattern will start flashingAlarm display setting Repeat Steps 4 and 5 to input ExitRecord settings are made as follows Operation example 1 Simultaneous Backup using the TimerExample of a system using the following peripherals Operation examplesOperation example 2 Endless Repeat recording Making backups as neededOperation examples Operation exampleSettings for Timer Program are made as follows Settings for Motion Detection Setting are made as followsTimer Setting screen Using the TimerSetting the Timer Complete the program settingPress the Timer REC button Estimating recording when using the TimerTo set other programs, repeat steps 5 through DET Application setting Using the TimerOverlapping Timer settings Medium of the peripheral deviceUsing the Timer / Alarm Recording Alarm RecordingRepeat Recording Pre-alarm RecordingVarious recordings Please refer to Basic recording on page 12 for detailsFlashing will move to capacity setting Series Recording menu settings for both unitsDisplay the Initial SET UP menu Series RecordingVarious playback functions High-speed fast-forward/high-speed rewind Monitor display settings and playback operationVarious playback functions / Various search Time date searchVarious search Alarm List SearchHow to count index signals Skip SearchScsi ID number allocation Various search / Using peripheral devices / Making copiesJump to Start point oldest recording Copying from the hard disk to the copying deviceRestoring items onto the hard disk from the copying device Setting of Copy rangeMaking copies Restoring items from the archive device to the hard diskProcedure for setting Making copies / Making backupsBackup operation Cancelling Copy operationMaking backups Individual settings during Backup operationPower failure reset recording Making backups / Other convenient functionsTimer Backup Power failure time displayExample Changing passwords Power failure compensation circuitPassword Lock function Other convenient functionsTCP / IP settings Communication settings / Connecting to a personal computerRS-232C settings Connecting with a personal computerConnecting to a personal computer / Command codes Command code and statusCommands Functions Status, when normal execute Command codesDetails of the numbers Communication Setting Normal REC SettingTime Date Adjust Initial Setup Service Power Failure Rear TerminalSA? Split Screen SettingCF? Small 1 Large FS1AC? SKP Skip PWR Power ARC Archive AEJ EjectSPLIT4 Selected Pattern 1 ~Basic Standard Medium DW?PP? Superior QR?AS0 Power 3 RemainAS1 Standard MediumRear AlarmprotFS2 RemainRJ? HDD RESTORE, OverwriteDevice Archive DeviceRC***AO Backup Near OvertakeBackup System Error HDD Near ENDOthers Main Devicehdd~ 1 0 PWR-OFF 1 CONFIG/INITIALIZE Table of Status Code Table of Error CodeError code Meaning of error Status code Meaning of statusCharacter Search Character Search commandsCommands Functions Status,when normal execute Character SearchCharacter Search Sample operationRecording duration is set to Long Pre-alarm recording time tableRecording time table Recording duration is set to MediumCopying device/archive TroubleshootingIs the Lock indicator light on? Operate Device does not respondCheck the Access indicator Troubleshooting / GlossaryIs peripheral device’s Scsi ID setting set correctly? Glossary60-63 Canceling27,28 19,20Specifications 10kΩ5V Input22kΩ terminal 047∝F872C273B5
Top Page Image Contents