Mitsubishi Electronics DX-TL1600EM operation manual Initializing menus, IM-CHECK Mode setting

3.Turn the JOG dial until the cursor is next to ARCHIVE POINT RESET and turn the SHUTTLE ring to the right.

•The sub-item will start flashing.

4.Turn the JOG dial until “ON” flashes.

<SERVICE>￿
POWER FAILURE￿	ON￿
@ARCHIVE POINT RESET
MENU INITIALIZE	OFF￿
IM-CHECK MODE	OFF

5.When the message, “TURN THE SHUTTLE RING >> TO EXECUTE.” is shown on the screen, turn the SHUTTLE ring to the right.

•The Archive Pointer is now reset.

•If not executing,turn the JOG dial until “OFF” is shown.

<SERVICE>￿
POWER FAILURE￿	ON￿
@ARCHIVE POINT RESET
MENU INITIALIZE	OFF￿
IM-CHECK MODE	OFF￿
￿
TURN THE SHTTLE RING￿

>>TO EXECUTE.

6.Turn the SHUTTLE ring to the left or press the SET UP button.

♦Initializing menus

Selecting “ON” of MENU INITIALIZE in the <SERVICE> menu initializes the setting ,except for the built-in HDD and the peripheral recording device.

Example: Setting MENU INITIALIZE to “ON” (the default is “OFF”).

1.Press the SET UP button to display the <MENU SETTING> menu.

2.Move the cursor next to SERVICE then turn the SHUTTLE ring to the right.

•The <SERVICE> menu appears.

3.Turn the JOG dial until the cursor is next to MENU INITIALIZE and turn the SHUTTLE ring to the left to show “ON”.

<SERVICE>￿
POWER FAILURE￿
ARCHIVE POINT RESET OFF￿
@MENU INITIALIZE	ON￿
IM-CHECK MODE	OFF

4.When “PUSH WARNING RESET KEY THEN ALL MENU WILL BE INITIALIZED.” appears on the screen, press the WARNING RESET button.

<SERVICE>￿
POWER FAILURE￿
ARCHIVE POINT RESET OFF￿
@MENU INITIALIZE	ON￿
IM￿ -CHECK MODE	OFF ￿
￿
PUSH WARNING RESET KEY￿
THEN ALL MENU￿
WILL BE INITIALIZED.

•If not executing, change the sub-item to “OFF” and turn the SHUTTLE ring to the right.

5.SPLIT 16 screen will be shown on the monitor and all menus are initialized.

06-09-	2000 12:12:05
Q	W	E	R
T	Y	U	I
O	P	{	}
q	w	e	r

•Please note that time date display, timer program setting, the title of all cameras set in CAMERA TITLE of the <MPX DISPLAY> menu are not initialized.

•The SELECTED PATTERN setting will be initialized to P1 of TIMER PROGRAM on the <MENU SETTING> menu. Please refer to the Menu displays on page 50.

♦IM-CHECK MODE setting

This function is designed to confirm whether alterations have been made to the data recorded by the unit.

Example: Setting IM-CHECK MODE to “ON” (the default is “OFF”).

1.Press the SET UP button to display the <MENU SETTING> menu.

2.Move the cursor next to SERVICE then turn the SHUTTLE ring to the right.

•The <SERVICE> menu appears.

3.Turn the JOG dial until the cursor is next to IM-CHECK MODE and turn the SHUTTLE ring to the right.

•The sub-item will start flashing.

4.Turn the JOG dial until “ON” flashes.

<SERVICE>￿
POWER FAILURE￿	OFF￿
ARCHIVE POINT RESET
MENU INITIALIZE	OFF￿
@IM-CHECK MODE	ON

5.Turn the SHUTTLE ring to the left or press the SET UP button.

INFORMATION

To distinguish alterations to recorded data:

•Use the PLAY DEVICE button to select the device that is to be inspected for alterations.

•Press the PLAY button to begin playback of re- corded data.

•If an alteration is detected on part of the data during playback, “ ■ ” will appear to the right of the “A” (Alarm Recording number) in the Time Display. “ ■ ” indi- cates the CAMERA channel of the altered data.

28-10-2001 SUN A￿

00:00:00 25F 50% C16￿

WARNING: MODIFIED IMAGE￿

(QWERTYUIOP{}qwer)

•The displayed “ ■ ” and the WARNING display can be cleared by pressing the WARNING RESET but- ton.

•This function does not work with the communica- tion function.

If you don’t use this function, please select the sub-item “OFF”.

ENGLISH

•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Operations

29