Mitsubishi Electronics DX-TL1600EM Various search / Using peripheral devices / Making copies

Page 59

Various search (continued) / Using peripheral devices / Making copies

When over-writing data stored on the hard disk drive, the start-time for a given Alarm Recording will

be automatically erased from the Alarm List when the image data recorded at the start of that Alarm Recording is over-written.

4.To play back search results.

•Press either the PLAY button or the PAUSE button.

5.Press the STOP button to stop playback and still frame mode.

•Press the SEARCH button, the display will revert to its original state.

During playback of the archive device or copying device media, playback can be made using an in-

terval that differs from the recording interval by press- ing the PLAY button or the REV PLAY button. Visual quality will depend on the device’s transmission speed.

3.Select the device to be played by pressing the PLAY DEVICE button on the front of this unit. The selected device’s indicator light will turn on.

PLAY DEVICE

ENGLISH

■Jump to Start point (oldest recording)

A process for finding the start point of oldest recorded data, and delivering that start-point on-screen as a still frame.

1.Press the SEARCH button to display the <SEARCH SELECTION> menu.

2.Turn the JOG dial to select the JUMP TO START POINT, and turn the SHUTTLE ring to the right.

<SEARCH SELECTION>￿ SELECTION CAMERA NO. 5￿ TIME DATE SEARCH￿ INDEX SEARCH￿

SKIP SEARCH￿ ALARM LIST SEARCH￿

￿

￿

￿

@JUMP TO START POINT

Check whether the connected device’s access lamp is on.

4.Press the PLAY button.

•The device will start playing after a still picture has been displayed.

Various play and search options using the SHUT- TLE ring are possible during playback of the copy

ing device, although there will be some delay be- fore images are displayed.

INFORMATION

If a DDS-type tape media is con- nected as an external recording device, playback,

eject and other functions may take a few minutes depending on the media’s recording condition.

3.Turn the SHUTTLE ring to the right when the <JUMP TO START POINT> menu appears.

•The unit displays the still frames of the 1st part of the recording on a SPLIT 16 screen. For full-screen viewing of a particular frame, press the button of that image’s camera number.

<JUMP TO START POINT>￿

￿

TURN THE SHUTTLE RING￿

>> TO PLAY BACK￿ OLDEST RECORDED DATA.

To play back search results, press either the PLAY button or the PAUSE button.

4.Press the STOP button to stop searching.

•The display will revert to its original state.

■SCSI ID number allocation

ID0 to ID3 are allocated to the main hard disk drive. ID4 is allocated to the archive device, and ID5 is allocated to the copying device.

■Copying from the hard disk to the copying device

This unit features the capability to use a designated copy device to copy data recorded on its hard disk. In addition, the Copy range can be specified.

The copying device must be connected to ID5 when copying recorded material. Refer to page 19

for more details on ID numbers.

•Set the COPY DIRECTION on the <COPY SELECTION> menu to “HDD } COPY”.

•Set the OVERWRITE on the <COPY SELECTION> menu to “OFF”. Refer to page 16 for details on the <COPY SE- LECTION> menu settings.

When “ON” is selected, previously recorded data will be erased and the designated Copy range will

be copied. When “OFF” is specified, copying will begin at a point after the previously recorded data.

■Selecting other devices

The device to be used in playback can be chosen using the PLAY DEVICE button located on the main unit’s front face. Check to see that the selected device’s PLAY DE- VICE indicator is on.

1.Press the POWER button.

2.Insert the medium of archive device or copying device.

••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••

Operations

59

Page 58 Page 60
Image 59
Page 58 Page 60
Contents DX-TL1600EM Features Unplug the Power Cord During a Long Absence Contents Communication settings Major operations and their functions Play button Play Device indicatorsPlay Mode buttons Play Device buttonMajor operations and their functions Terminals Exiting the menu How to use JOG dial and Shuttle ringSetting the character size Basic OperationsCamera mark will be shown on the present time dis- play Setting the present timeDaylight saving Present time displayBasic recording Basic OperationsMultiplexer functions Check the estimated recording time Setting the maximum recording fieldsPress the SET UP button to exit settings Example Choose Select REC Mode B the default setting is aPress the Stop button to stop recording Setting the define groupPress the REC button Ton on the front of the unit Basic playbackBasic searching function Time date searchMAN Set the start time and end time of copying manually Press the Search button to clear the Time Date Search menuDisplay will return to the present time display Language selection settingYou can copy the data even during Recording Turn the Shuttle ring to the right to start copyingAttaching the ferrite core ConnectionsTurning ON/OFF this Unit by peripheral source Peripheral devices to be connected Alarm Recording ConnectionConnecting with peripheral recording devices Connection when using several peripheral recording devicesConfirming the connected device Initial settingsHow to install an external hard disk drive Example Installing a 9GB hard disk drive to ID1Press the Power button again Setting this unit to delay the boot up timeSUB Menu Menu functionsMain Menu Operations From **-**-** ****** to Menu functionsSetting character size How to set up / Various settingsHow to display menus Setting Display ModeVarious settings Be changed as follows Capacity remain settingCall OUT setting None No signal is emitted from the Call OUT terminalResetting the Archive Pointer Service menu settingBuzzer setting Power Failure listInitializing menus IM-CHECK Mode settingHDD repeat recording Initial set upClock setting Archive medium overwrite settingInitial SET UP menu will be displayed Auto-eject settingExample Setting Auto Eject to OFF the default is on Archive Data settingMotion Detection setting Backing up a data block containing the alarm recordBacking up a small alarm record FIFO/OVERWRITE Mode settingShowing the recorded period Information menuElapsed time display Values they will remain 2STurn the Shuttle ring twice to the right Quick settingRDD Menu Data Loading setting Menu Data Saving RDD setting CommandsMaximum recording fields setting Various recording settingsVarious recording settings Image quality settingWill be changed as follows Various recording settingsWhen the is assigned, the camera is disabled Changed as followsGround the Alarm in terminal Tection setting in the Initial SET UP menu is onCamera Alarm Rec setting Pre-alarm recording settingMotion menu will appear DET settingCH. motion detection setting Selection camera noTurn the Shuttle ring to the left to finish setting Setting the detection maskSensitivity setting Test Mode menu will appear Motion threshold settingTest mode setting To finish setting, turn the Shuttle ring to the leftIng the SPLIT/SEQUENCE button How to use the Zoom buttonAge will appear pixelized when enlarged Multiplexer functionsSPLIT/SEQUENCE button How to use the camera number buttonsMultiplexer functions Multiplexer display Screen SW Pattern settingsSplit 4 Screen setting Split 9 Screen settingImage quality of split screen Please change settingsSplit 16 Screen setting Sequence settingSelected pattern will start flashing Camera title settingDisplaying the title Maximum of 30 seconds can be setRepeat Steps 4 and 5 to input Exit Alarm display settingOperation examples Operation example 1 Simultaneous Backup using the TimerExample of a system using the following peripherals Record settings are made as followsOperation example Making backups as neededOperation examples Operation example 2 Endless Repeat recordingSettings for Motion Detection Setting are made as follows Settings for Timer Program are made as followsComplete the program setting Using the TimerSetting the Timer Timer Setting screenTo set other programs, repeat steps 5 through Estimating recording when using the TimerPress the Timer REC button Medium of the peripheral device Using the TimerOverlapping Timer settings DET Application settingAlarm Recording Using the Timer / Alarm RecordingPlease refer to Basic recording on page 12 for details Pre-alarm RecordingVarious recordings Repeat RecordingSeries Recording Series Recording menu settings for both unitsDisplay the Initial SET UP menu Flashing will move to capacity settingVarious playback functions Time date search Monitor display settings and playback operationVarious playback functions / Various search High-speed fast-forward/high-speed rewindSkip Search Alarm List SearchHow to count index signals Various searchCopying from the hard disk to the copying device Various search / Using peripheral devices / Making copiesJump to Start point oldest recording Scsi ID number allocationRestoring items from the archive device to the hard disk Setting of Copy rangeMaking copies Restoring items onto the hard disk from the copying deviceCancelling Copy operation Making copies / Making backupsBackup operation Procedure for settingIndividual settings during Backup operation Making backupsPower failure time display Making backups / Other convenient functionsTimer Backup Power failure reset recordingOther convenient functions Power failure compensation circuitPassword Lock function Example Changing passwordsConnecting with a personal computer Communication settings / Connecting to a personal computerRS-232C settings TCP / IP settingsCommand code and status Connecting to a personal computer / Command codesDetails of the numbers Command codesCommands Functions Status, when normal execute Initial Setup Service Power Failure Rear Terminal Normal REC SettingTime Date Adjust Communication SettingSmall 1 Large FS1 Split Screen SettingCF? SA?Selected Pattern 1 ~ SKP Skip PWR Power ARC Archive AEJ EjectSPLIT4 AC?Superior QR? DW?PP? Basic Standard MediumStandard Medium Power 3 RemainAS1 AS0Remain AlarmprotFS2 RearArchive Device HDD RESTORE, OverwriteDevice RJ?HDD Near END Backup Near OvertakeBackup System Error RC***AOMain Devicehdd Others~ 1 0 PWR-OFF 1 CONFIG/INITIALIZE Status code Meaning of status Table of Error CodeError code Meaning of error Table of Status CodeCharacter Search Character Search commandsCommands Functions Status,when normal execute Character SearchSample operation Character SearchRecording duration is set to Medium Pre-alarm recording time tableRecording time table Recording duration is set to LongDevice does not respond TroubleshootingIs the Lock indicator light on? Operate Copying device/archiveGlossary Troubleshooting / GlossaryIs peripheral device’s Scsi ID setting set correctly? Check the Access indicator19,20 Canceling27,28 60-6310kΩ5V Input22kΩ terminal 047∝F Specifications872C273B5
Top Page Image Contents