Mitsubishi Electronics DX-TL1600EM Various playback functions / Various search, Time date search

Page 57

Various playback functions (continued) / Various search

■High-speed fast-forward/high-speed rewind

When the SHUTTLE ring is turned clockwise or counter clockwise for over one second during STOP mode, the unit will shift into high-speed fast-forward or high-speed rewind mode, and an indicator will appear at the bottom left of the monitor. “S” denotes the start point of the data stored in the hard disk, and “E” denotes the end point. The vertical line marks the current position.

01-01-2001 MON ￿

00:00:00 25F

30% C16

S

 

 

E

 

 

■Monitor display settings and playback operation

•Single screen : The screen will change frame by frame at a rate equal to the recording interval multiplied by the number of cameras used in the recording.

•SPLIT 4 : Each mini-screen will change frame by frame at a rate equal to the recording interval multiplied by the number of cameras used in the recording. The screen dis- play shift to still frame mode during playback from a cam- era which is not indicated.

•SPLIT 9 : Each mini-screen will change frame by frame at the recorded interval. The screen display shift to still frame mode during playback from a camera which is not indi- cated.

•SPLIT 16 : Each mini-screen will change frame by frame at the recorded interval.The screen display shift to still frame mode during playback from a camera which is not indi- cated.

■Time date search

Please refer to page 15 for detailed operation.

■Index Search

During Alarm Recording, an index signal will automatically be written onto the hard disk. Index Search is a process of retrieving still frames using their associated index signal to select the camera number.

The index count can be set, as desired, up to 99.

Example: Enter 10 for the index count, then start a search to select the camera number 5.

1.Press the SEARCH button to display the <SEARCH SELECTION> menu.

<SEARCH SELECTION>￿ @SELECTION CAMERA NO.ALL￿ TIME DATE SEARCH￿ INDEX SEARCH￿

SKIP SEARCH￿ ALARM LIST SEARCH￿

￿

￿

JUMP TO START POINT￿

￿

2.Make sure that the cursor ( ) is set to the SELECTION CAMERA NO. menu, and turn the SHUTTLE ring to the right.

•The sub-item of SELECTION CAMERA NO. will start flashing.

<SEARCH SELECTION>￿ @SELECTION CAMERA NO.ALL￿ TIME DATE SEARCH￿ INDEX SEARCH￿

SKIP SEARCH￿ ALARM LIST SEARCH￿

￿

￿

JUMP TO START POINT￿

￿

3.Turn the JOG dial to display 5 then turn the SHUTTLE ring to the right.

•The flashing will stop.

<SEARCH SELECTION>￿ @SELECTION CAMERA NO. 5 TIME DATE SEARCH￿ INDEX SEARCH￿

SKIP SEARCH￿ ALARM LIST SEARCH￿

￿

￿

JUMP TO START POINT￿

￿

By turn the JOG dial, the selec- tion camera number will be changed as below :

ALL QWERTYU

rewq}{POI

4.Turn the JOG dial to select the INDEX SEARCH, and turn the SHUTTLE ring to the right.

•The <INDEX SEARCH> menu will appear .

<SEARCH SELECTION>￿ SELECTION CAMERA NO. 5￿ TIME DATE SEARCH￿ @INDEX SEARCH￿

SKIP SEARCH￿ ALARM LIST SEARCH￿

￿

￿

JUMP TO START POINT￿

￿

5.Turn the JOG dial to display the desired index count, then turn the SHUTTLE ring to the desired search direction. (Turn right to move forward, turn left to move in reverse.)

•Index Search begins, and the images corresponding to the set index count are displayed either on a SPLIT 16 screen if “ALL” is selected in the SELECTION CAMERA NO. setting, or on a single screen if an individual camera number has been selected.

•The index count will begin blinking if the index signal has not been recorded, i.e., the Index Search will not be executed. Press the SEARCH button and the unit returns to normal playback mode.

<INDEX SEARCH> ￿

5￿

￿

 

10￿

￿

INPUT INDEX NUMBER￿

TURN THE SHUTTLE RING￿

<<OR >> TO VIEW NEXT￿

ALARM.

When “ALL” is selected in the setting parameter, switching the search result display from SPLIT 16

screen to the Single screen display for a specific camera number requires the following process. First press the SEARCH button, then delete the <SEARCH SELECTION> menu. Select the camera number by pressing the Camera number buttons on the front of this unit. The selected image will be shown on the Single screen mode.

When using DDS tape, index searches can be performed in the forward direction only.

ENGLISH

••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••

Operations

57

Page 56 Page 58
Image 57
Page 56 Page 58
Contents DX-TL1600EM Features Unplug the Power Cord During a Long Absence Contents Communication settings Major operations and their functions Play Mode buttons Play Device indicatorsPlay Device button Play buttonMajor operations and their functions Terminals Setting the character size How to use JOG dial and Shuttle ringBasic Operations Exiting the menuDaylight saving Setting the present timePresent time display Camera mark will be shown on the present time dis- playBasic Operations Multiplexer functionsBasic recording Press the SET UP button to exit settings Setting the maximum recording fieldsExample Choose Select REC Mode B the default setting is a Check the estimated recording timeSetting the define group Press the REC buttonPress the Stop button to stop recording Basic searching function Basic playbackTime date search Ton on the front of the unitMAN Set the start time and end time of copying manually Press the Search button to clear the Time Date Search menuYou can copy the data even during Recording Language selection settingTurn the Shuttle ring to the right to start copying Display will return to the present time displayConnections Turning ON/OFF this Unit by peripheral sourceAttaching the ferrite core Connecting with peripheral recording devices Alarm Recording ConnectionConnection when using several peripheral recording devices Peripheral devices to be connectedHow to install an external hard disk drive Initial settingsExample Installing a 9GB hard disk drive to ID1 Confirming the connected devicePress the Power button again Setting this unit to delay the boot up timeMenu functions Main MenuSUB Menu Operations From **-**-** ****** to Menu functionsHow to display menus How to set up / Various settingsSetting Display Mode Setting character sizeVarious settings Call OUT setting Capacity remain settingNone No signal is emitted from the Call OUT terminal Be changed as followsBuzzer setting Service menu settingPower Failure list Resetting the Archive PointerInitializing menus IM-CHECK Mode settingClock setting Initial set upArchive medium overwrite setting HDD repeat recordingExample Setting Auto Eject to OFF the default is on Auto-eject settingArchive Data setting Initial SET UP menu will be displayedBacking up a small alarm record Backing up a data block containing the alarm recordFIFO/OVERWRITE Mode setting Motion Detection settingElapsed time display Information menuValues they will remain 2S Showing the recorded periodRDD Menu Data Loading setting Menu Data Saving RDD setting Quick settingCommands Turn the Shuttle ring twice to the rightVarious recording settings Various recording settingsImage quality setting Maximum recording fields settingWhen the is assigned, the camera is disabled Various recording settingsChanged as follows Will be changed as followsCamera Alarm Rec setting Tection setting in the Initial SET UP menu is onPre-alarm recording setting Ground the Alarm in terminalCH. motion detection setting DET settingSelection camera no Motion menu will appearSetting the detection mask Sensitivity settingTurn the Shuttle ring to the left to finish setting Test mode setting Motion threshold settingTo finish setting, turn the Shuttle ring to the left Test Mode menu will appearAge will appear pixelized when enlarged How to use the Zoom buttonMultiplexer functions Ing the SPLIT/SEQUENCE buttonHow to use the camera number buttons Multiplexer functionsSPLIT/SEQUENCE button Split 4 Screen setting Screen SW Pattern settingsSplit 9 Screen setting Multiplexer displaySplit 16 Screen setting Please change settingsSequence setting Image quality of split screenDisplaying the title Camera title settingMaximum of 30 seconds can be set Selected pattern will start flashingRepeat Steps 4 and 5 to input Exit Alarm display settingExample of a system using the following peripherals Operation example 1 Simultaneous Backup using the TimerRecord settings are made as follows Operation examplesOperation examples Making backups as neededOperation example 2 Endless Repeat recording Operation exampleSettings for Motion Detection Setting are made as follows Settings for Timer Program are made as followsSetting the Timer Using the TimerTimer Setting screen Complete the program settingEstimating recording when using the Timer Press the Timer REC buttonTo set other programs, repeat steps 5 through Overlapping Timer settings Using the TimerDET Application setting Medium of the peripheral deviceAlarm Recording Using the Timer / Alarm RecordingVarious recordings Pre-alarm RecordingRepeat Recording Please refer to Basic recording on page 12 for detailsDisplay the Initial SET UP menu Series Recording menu settings for both unitsFlashing will move to capacity setting Series RecordingVarious playback functions Various playback functions / Various search Monitor display settings and playback operationHigh-speed fast-forward/high-speed rewind Time date searchHow to count index signals Alarm List SearchVarious search Skip SearchJump to Start point oldest recording Various search / Using peripheral devices / Making copiesScsi ID number allocation Copying from the hard disk to the copying deviceMaking copies Setting of Copy rangeRestoring items onto the hard disk from the copying device Restoring items from the archive device to the hard diskBackup operation Making copies / Making backupsProcedure for setting Cancelling Copy operationIndividual settings during Backup operation Making backupsTimer Backup Making backups / Other convenient functionsPower failure reset recording Power failure time displayPassword Lock function Power failure compensation circuitExample Changing passwords Other convenient functionsRS-232C settings Communication settings / Connecting to a personal computerTCP / IP settings Connecting with a personal computerCommand code and status Connecting to a personal computer / Command codesCommand codes Commands Functions Status, when normal executeDetails of the numbers Time Date Adjust Normal REC SettingCommunication Setting Initial Setup Service Power Failure Rear TerminalCF? Split Screen SettingSA? Small 1 Large FS1SPLIT4 SKP Skip PWR Power ARC Archive AEJ EjectAC? Selected Pattern 1 ~PP? DW?Basic Standard Medium Superior QR?AS1 Power 3 RemainAS0 Standard MediumFS2 AlarmprotRear RemainDevice HDD RESTORE, OverwriteRJ? Archive DeviceBackup System Error Backup Near OvertakeRC***AO HDD Near ENDMain Devicehdd Others~ 1 0 PWR-OFF 1 CONFIG/INITIALIZE Error code Meaning of error Table of Error CodeTable of Status Code Status code Meaning of statusCommands Functions Status,when normal execute Character Search commandsCharacter Search Character SearchSample operation Character SearchRecording time table Pre-alarm recording time tableRecording duration is set to Long Recording duration is set to MediumIs the Lock indicator light on? Operate TroubleshootingCopying device/archive Device does not respondIs peripheral device’s Scsi ID setting set correctly? Troubleshooting / GlossaryCheck the Access indicator Glossary27,28 Canceling60-63 19,2010kΩ5V Input22kΩ terminal 047∝F Specifications872C273B5
Top Page Image Contents