Mitsubishi Electronics DX-TL1600EM DET setting, Selection camera no, CH. motion detection setting

Page 38

Various recording settings (continued)

All the camera channels set in the Alarm Re- cording’s DEFINE GROUP SETTING are used for

the Pre-alarm Recording camera channels, even if, for example, the SEP is selected in the RECORD ALARM setting.

♦M-DET setting

These settings are used to make adjustments to the MO- TION DETECTION function, which initiates Alarm Record- ing when movement is detected within the images captured by the cameras. To setup the M-DET SETTING, first turn the MOTION DETECTION setting “ON” in the <INITIAL SET UP> menu. The M-DET SETTING screen will not be displayed when this setting is “OFF”. Please refer to <INITIAL SET UP> menu, MOTION DETECTION setting on page 32.

1.Press the SET UP button to display the <MENU SETTING> menu.

2.Turn the JOG dial to select the A-REC/M-DET SETTING and turn the SHUTTLE ring to the right.

•The <A-REC/M-DET SETTING> menu will appear.

<A-REC/M-DET SETTING>￿

@IMAGE QUALITY

HIGH￿

MAX REC FIELDS

12.5F ￿

DEFINE GROUP SETTING￿

A-REC DURATION

15S￿

RECORD ALARM

SEP ￿

PRE A-REC

OFF￿

￿

 

M-DET SETTING

 

3.Turn the JOG dial to select the M-DET SETTING and turn the SHUTTLE ring to the right.

•The <MOTION> menu will appear.

<MOTION>￿

CAMERA NO.

 

@SELECTION

1

￿

DETECTION

OFF

CH.MOTION

SET DETECTION MASK￿

MED￿

SENSITIVITY

MOTION THRESHOLD

2

TEST MODE

 

OFF

When the MOTION DETECTION setting in the INITIAL SET UP menu is turned ON, the MAX REC

FIELDS for each time setting will be automatically

altered as follows. These settings will not auto- matically revert to their former values even if MOTION DETECTION is turned OFF.

Case of <NORMAL REC SETTING> menu and <A- REC/M-DET SETTING> menu.

“25F” } “12.5F”, “8.33F” } “6.25F” , “5F” } “4.17F”

Case of “MODE” in the <TIMER PROGRAM> menu. “25” } “12.5”, “8.33” } “6.25” , “5” } “4.17”

♦Selection camera NO.

In this step, the cameras used for the MOTION DETEC- TION setting are selected.

Example: Setting the SELECTION CAMERA NO. to “5”(the default setting is “1”).

1.After step 3 of M-DET SETTING procedures above. Check that the cursor is next to the SELECTION CAMERA NO. and turn the SHUTTLE ring to the right.

•The sub-item will start flashing.

<MOTION>￿

CAMERA NO.

 

￿

@SELECTION

1

￿

DETECTION

OFF ￿

CH.MOTION

SET DETECTION MASK￿

MED￿

 

SENSITIVITY

￿

MOTION THRESHOLD

2

TEST MODE

 

OFF

 

2.Turn the JOG dial to display “ 5” then turn the SHUTTLE ring to the right.

•The sub-item stops flashing.

<MOTION>￿

CAMERA NO.

 

@SELECTION

5

￿

DETECTION OFF

CH.MOTION

SET DETECTION MASK￿

MED￿

SENSITIVITY

MOTION THRESHOLD

2

TEST MODE

 

OFF

When the SELECTION CAMERA NO. setting has been made, the background display will switch to

the selected camera. By exiting the menu, the dis- play will revert to its original state.

♦CH. motion detection setting

MOTION DETECTION function can make activated for each of the connected cameras. The MOTION DETEC- TION function becomes operative only after this setting has been activated.

Example: Setting the CH. MOTION DETECTION to “ON” (the default setting is “OFF”).

1.After step 3 of M-DET SETTING procedures left. Turn the JOG dial to select the CH. MOTION DETECTION and turn the SHUTTLE ring to the right.

•The sub-item will start flashing.

<MOTION>￿

SELECTION CAMERA NO. 5 ￿

￿

@CH.MOTION DETECTION OFF ￿

SET DETECTION MASK￿

MED￿

 

SENSITIVITY

￿

MOTION THRESHOLD

2

TEST MODE

OFF

 

2.Turn the JOG dial to display ON then turn the SHUTTLE ring to the right.

•The sub-item stops flashing.

<MOTION>￿

 

 

SELECTION CAMERA NO.

5

 

￿

ON ￿

@CH.MOTION DETECTION

SET DETECTION MASK￿

MED￿

 

SENSITIVITY

￿

MOTION THRESHOLD

2

TEST MODE

OFF

 

•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••

••••••••••••

•

38

Page 37 Page 39
Image 38
Page 37 Page 39
Contents DX-TL1600EM Features Unplug the Power Cord During a Long Absence Contents Communication settings Major operations and their functions Play Device button Play Device indicatorsPlay Mode buttons Play buttonMajor operations and their functions Terminals Basic Operations How to use JOG dial and Shuttle ringSetting the character size Exiting the menuPresent time display Setting the present timeDaylight saving Camera mark will be shown on the present time dis- playBasic recording Basic OperationsMultiplexer functions Example Choose Select REC Mode B the default setting is a Setting the maximum recording fieldsPress the SET UP button to exit settings Check the estimated recording timePress the Stop button to stop recording Setting the define groupPress the REC button Time date search Basic playbackBasic searching function Ton on the front of the unitPress the Search button to clear the Time Date Search menu MAN Set the start time and end time of copying manuallyTurn the Shuttle ring to the right to start copying Language selection settingYou can copy the data even during Recording Display will return to the present time displayAttaching the ferrite core ConnectionsTurning ON/OFF this Unit by peripheral source Connection when using several peripheral recording devices Alarm Recording ConnectionConnecting with peripheral recording devices Peripheral devices to be connectedExample Installing a 9GB hard disk drive to ID1 Initial settingsHow to install an external hard disk drive Confirming the connected deviceSetting this unit to delay the boot up time Press the Power button againSUB Menu Menu functionsMain Menu Operations Menu functions From **-**-** ****** toSetting Display Mode How to set up / Various settingsHow to display menus Setting character sizeVarious settings None No signal is emitted from the Call OUT terminal Capacity remain settingCall OUT setting Be changed as followsPower Failure list Service menu settingBuzzer setting Resetting the Archive PointerIM-CHECK Mode setting Initializing menusArchive medium overwrite setting Initial set upClock setting HDD repeat recordingArchive Data setting Auto-eject settingExample Setting Auto Eject to OFF the default is on Initial SET UP menu will be displayedFIFO/OVERWRITE Mode setting Backing up a data block containing the alarm recordBacking up a small alarm record Motion Detection settingValues they will remain 2S Information menuElapsed time display Showing the recorded periodCommands Quick settingRDD Menu Data Loading setting Menu Data Saving RDD setting Turn the Shuttle ring twice to the rightImage quality setting Various recording settingsVarious recording settings Maximum recording fields settingChanged as follows Various recording settingsWhen the is assigned, the camera is disabled Will be changed as followsPre-alarm recording setting Tection setting in the Initial SET UP menu is onCamera Alarm Rec setting Ground the Alarm in terminalSelection camera no DET settingCH. motion detection setting Motion menu will appearTurn the Shuttle ring to the left to finish setting Setting the detection maskSensitivity setting To finish setting, turn the Shuttle ring to the left Motion threshold settingTest mode setting Test Mode menu will appearMultiplexer functions How to use the Zoom buttonAge will appear pixelized when enlarged Ing the SPLIT/SEQUENCE buttonSPLIT/SEQUENCE button How to use the camera number buttonsMultiplexer functions Split 9 Screen setting Screen SW Pattern settingsSplit 4 Screen setting Multiplexer displaySequence setting Please change settingsSplit 16 Screen setting Image quality of split screenMaximum of 30 seconds can be set Camera title settingDisplaying the title Selected pattern will start flashingAlarm display setting Repeat Steps 4 and 5 to input ExitRecord settings are made as follows Operation example 1 Simultaneous Backup using the TimerExample of a system using the following peripherals Operation examplesOperation example 2 Endless Repeat recording Making backups as neededOperation examples Operation exampleSettings for Timer Program are made as follows Settings for Motion Detection Setting are made as followsTimer Setting screen Using the TimerSetting the Timer Complete the program settingTo set other programs, repeat steps 5 through Estimating recording when using the TimerPress the Timer REC button DET Application setting Using the TimerOverlapping Timer settings Medium of the peripheral deviceUsing the Timer / Alarm Recording Alarm RecordingRepeat Recording Pre-alarm RecordingVarious recordings Please refer to Basic recording on page 12 for detailsFlashing will move to capacity setting Series Recording menu settings for both unitsDisplay the Initial SET UP menu Series RecordingVarious playback functions High-speed fast-forward/high-speed rewind Monitor display settings and playback operationVarious playback functions / Various search Time date searchVarious search Alarm List SearchHow to count index signals Skip SearchScsi ID number allocation Various search / Using peripheral devices / Making copiesJump to Start point oldest recording Copying from the hard disk to the copying deviceRestoring items onto the hard disk from the copying device Setting of Copy rangeMaking copies Restoring items from the archive device to the hard diskProcedure for setting Making copies / Making backupsBackup operation Cancelling Copy operationMaking backups Individual settings during Backup operationPower failure reset recording Making backups / Other convenient functionsTimer Backup Power failure time displayExample Changing passwords Power failure compensation circuitPassword Lock function Other convenient functionsTCP / IP settings Communication settings / Connecting to a personal computerRS-232C settings Connecting with a personal computerConnecting to a personal computer / Command codes Command code and statusDetails of the numbers Command codesCommands Functions Status, when normal execute Communication Setting Normal REC SettingTime Date Adjust Initial Setup Service Power Failure Rear TerminalSA? Split Screen SettingCF? Small 1 Large FS1AC? SKP Skip PWR Power ARC Archive AEJ EjectSPLIT4 Selected Pattern 1 ~Basic Standard Medium DW?PP? Superior QR?AS0 Power 3 RemainAS1 Standard MediumRear AlarmprotFS2 RemainRJ? HDD RESTORE, OverwriteDevice Archive DeviceRC***AO Backup Near OvertakeBackup System Error HDD Near ENDOthers Main Devicehdd~ 1 0 PWR-OFF 1 CONFIG/INITIALIZE Table of Status Code Table of Error CodeError code Meaning of error Status code Meaning of statusCharacter Search Character Search commandsCommands Functions Status,when normal execute Character SearchCharacter Search Sample operationRecording duration is set to Long Pre-alarm recording time tableRecording time table Recording duration is set to MediumCopying device/archive TroubleshootingIs the Lock indicator light on? Operate Device does not respondCheck the Access indicator Troubleshooting / GlossaryIs peripheral device’s Scsi ID setting set correctly? Glossary60-63 Canceling27,28 19,20Specifications 10kΩ5V Input22kΩ terminal 047∝F872C273B5
Top Page Image Contents