Mitsubishi Electronics DX-TL1600EM operation manual Canceling, 27,28, 60-63, 19,20

Warnings and CALL OUT output

■Warnings and their appropriate countermeasures

Options in the CALL OUT options column:

•Selectable: CALL OUT output can be selected/de-selected on the menu.

•Fixed: a CALL OUT signal is emitted without prior selection of this function using the menu.

Warning	Status		Countermeasure	Canceling	CALL OUT	Reference
				the warning	output
	The internal hard disk drive		• When the warning is canceled, the unit	Press the		54
	is full when either “STOP” or
HDD FULL			will start over-writing the oldest data	WARNING	Selectable
	“ALARM•PROT” has been		remaining in the hard disk drive.
				RESET button.		27,28
	selected in “REPEAT”.		• Archive or copy data as necessary.
						60-63
	The storage capacity of the			Press the
	hard disk drive is approach-
HDD NEAR END			• Archive or copy data as necessary.	WARNING	Selectable	27,28
	ing the value entered into
				RESET button.
	the HDD capacity setting.
	The storage medium in the		• Replace the medium in the backup	Press the		27,28
ARCHIVE FULL	backup recording device is			WARNING	Selectable
			recording device.
	full.			RESET button.
	The limit of the archive		• Replace the medium in the backup	Press the
ARCHIVE NEAR END	medium's storage capacity			WARNING	Selectable	27,28
	is being reached.		recording device.	RESET button.
COPY OVERTAKE			• If you do not wish to have the data over-
	Non-backed up data was		written, stop recording.	Press the
ERROR	over-written while the HDD		• Change the settings for recording inter-	WARNING	Fixed	60-63
ARCHIVE OVERTAKE	was in Repeat mode.		val and image quality. (More specifically,	RESET button.
ERROR			lengthen intervals and lowre image quality.)
COPY NEAR	The HDD is in Repeat mode,		• If you do not wish to have the data over-
	and data which has not been
OVERTAKE			written, stop recording.
	backed up will be over-written.			Press the
			• Change the settings for recording inter-
ARCHIVE NEAR	(The amount of time remaining			WARNING	Fixed	60-63
OVERTAKE	before the unit begins over-		val and image quality. (More specifically,	RESET button.
	writing is approx. 0.5% of the		lengthen intervals and lowre image quality.)
	time indicated as the possible
	recording duration.)
	When using the copy or
COPY SIZE ERROR	restore functions, either the			Press the
	amount of data to be		• Reset the range of backup or copying.
ARCHIVE SIZE ERROR	transferred exceeds the			WARNING	Fixed	60-63
		• Replace the archive/copy medium.
				RESET button.
RESTORE SIZE ERROR	limits of the storage medium,
	or there is no data to be
	copied.
			• Check the storage medium in the RDD	Press the
COPY CHECK MEDIA 1	An error has occurred in		or DDS device. (Insert medium if there
				WARNING
			is none. If medium is present and you
ARCHIVE CHECK MEDIA 1	either the RDD device or			RESET button.	Fixed	60-63
			with to use it, undo the write-protection.
RESTORE CHECK MEDIA 1	the DDS device.		If medium is present and you do not
			wish to use it, replace the medium.)
NO SIGNAL			• Check whether the unit and camera are	• Either turn off
				recording or, if the
(Q W E R T Y U I			properly connected, and that electricity
	Visual signal was absent			visual signal has
O P { } q w e r)	for over 5 seconds during		is on.	been restored,	Fixed	14,18,36
			• Check whether the visual signal is
[The warning will	recording.			cancel the warning
			being properly outputted.
				• Press the
indicate the number
			• Check whether the unit’s camera
				WARNING RESET
of the non-functioning
			setting is set to an empty channel.
camera.]				button.
SYSTEM ERROR			• Confirm that the SCSI cable is properly
REC SYSTEM ERROR				Press the
	SCSI connection error or		connected.
COPY SYSTEM ERROR				WARNING	Fixed	19,20
	system malfunction.		• Restart operation.
ARCHIVE SYSTEM ERROR				RESET button.
			• Inspect the HDD/archive/copy device.
RESTORE SYSTEM ERROR
COPY R/W ERROR	A data-writing error occurred			Press the		19
ARCHIVE R/W ERROR	during backup or copying.		• Inspect the archive/copy device.	WARNING	Fixed
RESTORE R/W ERROR				RESET button.

•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Warnings and CALL OUT output

84