Various settings (continued)
■Quick setting
Complex menu settings, made in response to various uses, can be saved on RDD media connected to the unit through ID5. These settings can also be read by the unit from the RDD when needed.
One set of menu settings can be saved per one unit of RDD media. As menu settings are overwritten
each time the same unit of RDD media is used to save this information, only the most recently saved set of menu settings is left stored on the medium. Furthermore, menu settings are also overwritten when the unit reads them from the RDD.
5.The message, “COMPLETED.” is shown on the screen and then turn the SHUTTLE ring to the left.
•The message “COMPLETED.” will disappear.
6.Turn the JOG dial to select the POWER OFF, and turn the SHUTTLE ring to the right to define the setting.
•The power of this unit will be turned off.
<QUICK SETTING>
RDD}MENU DATA LOADING MENU DATA SAVING}RDD @POWER OFF
♦ RDD } MENU DATA LOADING setting | ♦ MENU DATA SAVING } RDD setting |
Example: The unit reads menu settings stored on the RDD medium.
1.Press the POWER button while pressing the ARCHIVE button to turn the power on.
•The <QUICK SETTING> menu will appear.
<QUICK SETTING>
@RDD}MENU DATA LOADING MENU DATA SAVING}RDD POWER OFF
POWER OFF is displayed if a peripheral device is not connected to ID5.
When settings are being made, the POWER but- ton blinks and the unit does not accept any other
commands.
2.Make sure that the cursor ( ) is set to the “RDD}MENU DATA LOADING”, and turn the SHUTTLE ring to the right.
•When “TURN THE SHUTTLE RING >> TO EXECUTE.” appears on the screen.
<QUICK SETTING>
@RDD}MENU DATA LOADING MENU DATA SAVING}RDD POWER OFF
TURN THE SHUTTLE RING
>> TO EXECUTE.
3.Turn the SHUTTLE ring twice to the right.
•“LOADING...” is displayed, and data reading is initiated.
<QUICK SETTING>
@RDD}MENU DATA LOADING MENU DATA SAVING}RDD POWER OFF
LOADING...
4.“COMPLETED.” is displayed when data reading has been completed.
<QUICK SETTING>
@RDD}MENU DATA LOADING MENU DATA SAVING}RDD POWER OFF
COMPLETED.
Example: The RDD media saves menu settings stored on the unit.
1.Press the POWER button while pressing the ARCHIVE button to turn the power on.
•The <QUICK SETTING> menu will appear.
<QUICK SETTING>
@RDD}MENU DATA LOADING MENU DATA SAVING}RDD POWER OFF
POWER OFF is displayed if a peripheral device is not connected to ID5.
When settings are being made, the POWER but- ton blinks and the unit does not accept any other
commands.
2.Turn the JOG dial to select the “MENU DATA SAVING}RDD”, and turn the SHUTTLE ring to the right.
•When “TURN THE SHUTTLE RING >> TO EXECUTE.” appears on the screen.
<QUICK SETTING>
RDD}MENU DATA LOADING @MENU DATA SAVING}RDD POWER OFF
TURN THE SHUTTLE RING
>> TO EXECUTE.
3.Turn the SHUTTLE ring twice to the right.
•“SAVING...” is displayed, and data saving is initiated. “COMPLETED.” is displayed when data saving has been completed.
<QUICK SETTING>
RDD}MENU DATA LOADING @MENU DATA SAVING}RDD POWER OFF
SAVING...
4.The message , “COMPLETED.” is shown on the screen and then turn the SHUTTLE ring to the left.
•The message “COMPLETED.” will disappear.
5.Turn the JOG dial to select the POWER OFF, and turn the SHUTTLE ring to the right to define the setting.
•The power of this unit will be turned off.
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• | •••••••••••• | • |
34