101
Set Stations (A)
Set station names that are registered in your unit.
Perform steps A and B of “Manual Channel Set” on page 99 to access the Confirmation screen before continuing.
A Select the item.
Press rt w e to select the item you want.
B Access the Manual Channel Set screen.
Press ENTER twice.
C Select the new station.
APress rt to select “ID”, then press ENTER.
BPress rt until the new station’s name (ID) you want to store appears, then press ENTER. Registered station names ( pg. 102, “TV Station And ID List”) appear as you press rt.
D Switch the stations.
Press w e to select “OK”, then press ENTER.
●Repeat steps A – D as necessary.
E Close the Confirmation screen.
Press SET UP twice.
Set Stations (B)
Set station names other than the ones registered in your unit.
Perform steps A and B of “Manual Channel Set” on page 99 to access the Confirmation screen and then perform steps A and B of “Set Stations (A)” ( pg. 101) before continuing.
A Select the character for station name.
APress rt to select “ID”, then press ENTER.
BPress ENTER twice.
B Enter the new character.
APress w e to locate the character insertion point.
BPress rt to cycle through the characters
CEnter the remaining characters the same way (maximum of 4).
DAfter entering all characters, press w e to select “OK”, then press ENTER.
C Close the Confirmation screen.
Press SET UP twice.
NOTE:
The characters available for the station name (ID) are
Fine-Tuning Channels Already Stored
Perform steps A and B of “Manual Channel Set” on page 99 to access the Confirmation screen before continuing.
A Select the channel to fine-tune.
APress rt w e to select the channel you want to fine- tune, then press ENTER.
BPress ENTER twice.
B Access the Manual Channel Set screen.
Press ENTER. The Manual Channel Set screen appears.
C Perform fine-tuning.
APress rt to select “FINE”.
BPress w e until the picture appears in its best quality.
● Repeat steps A – C as necessary.
D Close the Confirmation screen.
Press SET UP three times.