JVC LPT0827-001B, DR-M1SLB Install the unit, Connect the unit to a TV, Connect the unit to mains

Page 18

18	INSTALLING YOUR NEW UNIT (cont.)

Basic Connections

Aerial connector

Back of TV

TV aerial	RF cable
cable	(provided)

21-pin SCART connector

21-pin SCART cable (provided)

Mains power cord

ANTENNA IN

	Back of unit
L-1 IN/OUT	Mains outlet

ANTENNA OUT

ATTENTION:

Your TV must have a 21-pin AV input connector (SCART) for the connection to the unit.

It’s essential that your unit be properly connected.

THESE STEPS MUST BE COMPLETED BEFORE ANY VIDEO OPERATION CAN BE PERFORMED.

A Install the unit.

Place the unit on a stable, horizontal surface.

B Connect the unit to a TV.

ADisconnect the TV aerial cable from the TV.

BConnect the TV aerial cable to the ANTENNA IN connector on the rear panel of the unit.

CConnect the ANTENNA OUT connector on the rear panel of the unit and the TV’s aerial connector with the provided RF cable.

DConnect the L-1 IN/OUT connector on the rear panel of the unit and the TV’s 21-pin SCART connector with

a provided 21-pin SCART cable.

●The L-1 IN/OUT connector accepts and delivers either a composite signal (regular video signal), Y/C signal or RGB signal.

●Select an appropriate option of “L-1 OUTPUT” as follows ( pg. 84):

	When your TV’s SCART	Set “L-1 OUTPUT” to:
	connector accepts:	Set “L-1 OUTPUT” to:
	connector accepts:

	Y/C signal (separated
	luminance (brightness) and	“SCART S-VIDEO”
	chrominance (colour) signals)

	RGB signal	“SCART RGB”

●Set your TV to the VIDEO (or AV), Y/C, or RGB mode according to the type of your TV’s SCART connector.

●For switching the TV’s mode, refer to the instruction manual of your TV.

C Connect the unit to mains.

Connect the AC plug of the mains power cord into a mains outlet.

●“LOADING” blinks on the front display panel when the AC plug of the mains power cord is connected into a mains outlet, and it takes the unit approximately 50 seconds to be turned on. This is not a malfunction.

After connection is completed, perform “Auto Set Up” on page 21.

Image 18

Contents DR-M1SLB Safety Precautions Moisture Condensation Some Do’s And Don’ts On The Safe Use Of Equipment Above ALLContents DVD-RAM Discs About DiscsRecordable/playable discs DVD-R/RW DiscsRegion Number Discs for Playback OnlyUnplayable Discs Audio CDDVD-RAM Recording Medium and FormatFile Structure of Discs DVD-RDVD Video Marks JPEG/MP3 Disc CD-R/RW/ROMMarks related to video Placing a Disc Care and Handling of DiscsFront View Rear View Digital Audio OUT COAXIAL/OPTICALDisc Type/Status Indicator Front Display PanelSimulated Surround Effect Indicator 3D pg ON-SCREEN Display Disc DisplayRemote Control How To UseCheck Contents Install the unit Connect the unit to a TVConnect the unit to mains After the connection is completed, perform Auto Set Up on Back of unit8To connect to TV’s component video input connectors Connect the unit to TVTurn on the unit Auto Set UpPerform Auto Set Up EnterInitial Settings After Auto Set Up is completed, perform Monitor Set onPress Enter Perform Preset DownloadAfter Preset Download is completed, perform Monitor Set on Press rt to move Arrow to T-V Link and press EnterInformation Just ClockComplete the setting Access the Main Menu screenAccess the Video IN/OUT screen Monitor SetLanguage Access the Language SET screenPress w e to move Arrow to DVD SET UP, then press OK Select the desired languageLanguage Code List Attach the Satellite Controller Installing Satellite ControllerInstall a Satellite Controller Make connectionsSelect the satellite receiver’s channel for testing Setting satellite receiver’s brand and channelAccess the SAT/GUIDE PR screen Turn on the satellite receiverTV Auto Power On Unit Auto Standby Direct RecCheck the result of the test Start playback Basic PlaybackLoad a disc Pause playbackTop menu Locating a desired scene using the DVD menuAccess the DVD menu Disc menuSlow Motion Locating the start point of the item or skip the itemHigh-Speed Search Skip SearchResume playback Resume FunctionMemorise a resume point Mark positionsSwitching Time Indication Angle SelectionSubtitle Selection When you can’t switch the audio channel of a Locating a desired scene usingAccess the PBC menu Audio Channel Selection Menu of a Video CD with PBCLive Memory Playback Image figure of DVD-RAM discSuperimpose display Recording stops Overview of Live Memory PlaybackRecording screen Live Memory Playback screen CheckingDisplay during Live Memory Playback Example of bar meter displayAvailable only when paused FunctionsLive Check Start Live Memory Playback Start One Touch Replay functionTo watch a programme previously recorded while recording Contents of Play Set Up Menu during playback Using Play Set Up MenuHow to Access Play Set Up Menu Before using Play Set Up MenuAccess Play Set Up Menu Select the menu itemSelect the option Locate the start point Select the repeat modeRepeat Playback Locate the end point and start A-B Repeat PlaybackSelect the tracks in the desired order Random PlaybackProgramme Playback While stoppedLocating the beginning of a desired selection Select the desired itemSpecify the number of the selected item Use number keys 1-9, 0 to enter the time, then press To cancel the simulated surround effectEnter the time Press Enter to clear 3D-ON from the screenAdjusting the picture quality Select the switching interval of the slide showSetting the progressive mode Parental Lock Access the DVD SET UP screenEnter your password Select the desired levelChange the level To change the settingsAccess the password screen Change the country codeCountry/Area Code List for Parental Lock Playback Operations Pause recording Set the recording speedStart recording Stop recordingSwitch the TV to TV mode Instant Timer Recording ITREngage the ITR mode Set the recording durationType of Broadcast Being Free Rate FunctionReceiving Stereo and Bilingual Programmes ReceivedEnter the PlusCode number Access the Video Plus+ screenBefore performing the Video Plus+ Timer Programming Check the programme dataEngage the unit’s timer mode Access the confirmation screenComplete timer programming Set the following recording options as requiredAccess the programme screen Manual Timer ProgrammingAccess Programme Check screen Enter the recording dateEnter the recording stop time Refer to step E in Video Plus+ Timer Programming pgPDC Recording Enter the channel positionOn-Disc Timer Programming Before performing On-Disc Timer ProgrammingSet DAILY/WEEKLY option Load the discHow discs are overwritten Change a programme Disengage the timer modeComplete timer correction Programme’s information on the front display panelConfirm the overlapping programmes Select the desired programme to be cancelled or changedChange the programme setting Check if the conflict has been settledREC Mode Select the L-2 Select modeEngage the Automatic Satellite Programme Recording mode Programme RecordingArrow Guidance for operations H Operational commands IconsIcons and their meanings About registration of information About editing of programmesLimitations of registration Access the Index screen Select the programmesPress ENTER. Or simply press 4. The playback starts Select a programme Access the modify screenModify Index Register new indexModify Programme Name Modify CategoryProtect title Delete unwanted part of the programme Access the delete screenDelete programme Confirm the deletionCreate a play list Access the Play List screenCreate Play List Confirm the play listMove scenes Access the Editing screenAdd scenes to a play list Confirm the additionConfirm the move Repeat steps C EModify Programme Title Play back play listDelete play list Select the play listsAccess the library screen Scan for Programme from librarySort the information Register the disc Register discDelete information Confirm the registrationPlayback with MP3/JPEG Navigation Select the item Display the itemSelect the group Select the items in the desired orderDV Dubbing Start dubbing Performing dubbing without using the DV Dubbing controllerPrepare the unit for dubbing Stop dubbingSet the unit’s input mode Engage the Record mode of the recording deck Set the input mode of recording deckEngage the Play mode of the source player Start the source player1 Output Access the Output/Input Set screenIN/OUT connector 1 InputSelect the input mode for the Video Video connector Input Setting F-1 InputSelect the input mode for the L-2 Decoder connector 2 SelectFor the unit Select the input modePlace a disc and load an MD For the digital audio deviceRemote 1/2/3/4 Code Switching TV Multi-Brand Remote Control Set the TV brand codeOperate the TV Set the satellite receiver brand code Satellite Receiver Multi-Brand Remote ControlSlide the TV/CABLE/SAT/DVD switch to CABLE/SAT Operate the satellite receiverConnecting To a Satellite Receiver Make connections DVD SET UP Mode SetAccess the Recording SET screen Function SET UPAnalog Audio OUT Audio OutputDigital Audio OUT Range ControlSave AS Library XP Mode REC AudioRecording SET Audio RECSuperimpose Power SaveDisplay SET Grey BackAuto Timer OthersOFF on Guide Program Number Video Plus+ System SetupGuide Program Number Set Enter the Guide Program numberPerform Auto Channel Set Tuner SetAuto Channel Set View the Confirmation screenManual Channel Set Select the channel positionPress w e to select Manual CH SET, then press 100 Delete a ChannelChange Station Channel Position 101 Set Stations aSet Stations B 102 TV Station And ID List103 TV Station Channel Number GuideClock Set Access the Clock SET screenPress w e to select Initial SET UP, then press Enter 104Set the source channel position for clock data 105Set Just Clock Start the clock operationFormat a DVD-RAM disc Format a disc106 Format a DVD-RW disc107 Cancel the finalisation of a DVD-RWdiscFinalise a disc Finalise a DVD-R/RW disc108 Scan Mode SetSet the scan mode Press Progressive Scan for 2 or more seconds109 General110 Recording111 ON-SCREEN Messages112 ON-SCREEN MessagesJpeg 113DTS Mpeg114 TUNER/TIMERAccessories GeneralDelete programme Disc menu Discs for Playback Only 115Auto Channel Set Subtitle Selection Time Search Top menuDR-M1SLB