JVC LPT0827-001B, DR-M1SLB Clock Set, 104, Access the Clock SET screen, Set the date and time

104 SUBSIDIARY SETTINGS (cont.)

Clock Set

●Turn on the unit.

●Turn on the TV and select the AV mode.

●Slide the TV/CABLE/SAT/DVD switch to DVD.

IMPORTANT:

If you performed Auto Set Up ( pg. 21) or Preset Download ( pg. 23), without ever having set the clock previously, the unit’s built-in clock is also set automatically. Perform the following steps only if —

—Auto Clock Set has not been performed correctly by Auto Set Up or Preset Download.

OR

—you want to change Just Clock setting. ( “Just Clock” in the left column)

A Access the Main Menu screen.

Press SET UP.

B Access the “CLOCK SET” screen.

A Press w e to select “INITIAL SET UP”, then press ENTER.

B Press w e to select “CLOCK SET”, then press

ENTER.

C Set the date and time.

A Press rt to select “YEAR”, then press ENTER.

B Press rt to set the year, then press ENTER.

● Repeat the same procedure to set the date and time. When you set the time, press and hold rt to change the time by 30 minutes.

● When you set the date, press and hold rt to change the date by 15 days.

Just Clock

The Just Clock function provides accurate time keeping through automatic adjustments at regular intervals, by reading data from a PDC signal.

The Just Clock option can be set to “ON” or “OFF” at the Clock Set screen (the default setting is “OFF”). ( pg. 105) IMPORTANT: If you turn off Just Clock, the accuracy of your unit’s built-in clock may be reduced, which could adversely effect timer recording. We recommend you to keep Just Clock on. In cases where the clock setting data from a PDC signal is incorrect, however, you are advised to keep Just Clock set to “OFF”.