100 | SUBSIDIARY SETTINGS (cont.) |
D Select the band.
APress rt to select
“BAND”, then press
ENTER.
B Press rt to change the band between CH (regular) and CC (cable), then press ENTER.
E Enter the channel.
APress rt to select “CH”, then press ENTER.
BPress rt to input the channel number you want to
store.
●To enter the registered station name ( pg. 102, “TV Station And ID List”), press rt to select “ID”, then press ENTER. Press rt.
●For fine tuning adjustment, press rt to select “FINE”, then press ENTER. Press rt to perform
●When
VIDEO” or “SAT
F Enter new channel information.
Press ENTER. The Confirmation screen appears.
●Repeat steps C – F as necessary.
G Close the Confirmation screen.
Press SET UP.
●To change positions, see “Change Station Channel Position” ( pg. 100).
●If you wish to set station names other than the ones registered in your unit, see “Set Stations (B)” ( pg. 101).
ATTENTION:
Guide Program numbers are not set when channels are stored manually. ( pg. 97, “VIDEO Plus+® System Setup”)
Delete A Channel
Perform steps A and B of “Manual Channel Set” on page 99 to access the Confirmation screen before continuing.
A Select the item.
Press rt w e to select the item you want to delete.
B Delete a channel.
Press &.
●The item next to the cancelled one moves up one line.
●Repeat steps A and B as necessary.
C Close the Confirmation screen.
Press SET UP.
Change Station Channel Position
Perform steps A and B of “Manual Channel Set” on page 99 to access the Confirmation screen before continuing.
A Select the item.
Press rt w e to select the item you want to move, then press ENTER.
B Select the new position.
Press rt w e to select the new channel position, then press ENTER.
Example: If you moved the station in position 4 to position 2, the stations originally in positions 2 and 3 each move down one space.
●Repeat steps A and B as necessary.
C Close the Confirmation screen.
Press SET UP twice.