JVC LPT0827-001B, DR-M1SLB manual Some Do’s And Don’ts On The Safe Use Of Equipment, Above ALL

Page 4

4SAFETY FIRST (cont.)

Some Do’s And Don’ts On The Safe Use Of Equipment

This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured.

DO read the operating instructions before you attempt to use the equipment.

DO ensure that all electrical connections (including the mains plug, extension leads and interconnections between pieces of equipment) are properly made and in accordance with the manufacturer’s instructions. Switch off and withdraw the mains plug when making or changing connections.

DO consult your dealer if you are ever in doubt about the installation, operation or safety of your equipment.

DO be careful with glass panels or doors on equipment.

DON’T continue to operate the equipment if you are in any doubt about it working normally, or if it is damaged in any way — switch off, withdraw the mains plug and consult your dealer.

DON’T remove any fixed cover as this may expose dangerous voltages.

DON’T leave equipment switched on when it is unattended unless it is specifically stated that it is designed for unattended operation or has a standby mode. Switch off using the switch on the equipment and make sure that your family knows how to do this. Special arrangements may need to be made for infirm or handicapped people.

DON’T use equipment such as personal stereos or radios so that you are distracted from the requirements of road safety. It is illegal to watch television whilst driving.

DON’T listen to headphones at high volume, as such use can permanently damage your hearing. DON’T obstruct the ventilation of the equipment, for example with curtains or soft furnishings.

Overheating will cause damage and shorten the life of the equipment.

DON’T use makeshift stands and NEVER fix legs with wood screws — to ensure complete safety always fit the manufacturer’s approved stand or legs with the fixings provided according to the instructions.

DON’T allow electrical equipment to be exposed to rain or moisture.

ABOVE ALL...

NEVER let anyone especially children push anything into holes, slots or any other opening in the case — this could result in a fatal electrical shock;

NEVER guess or take chances with electrical equipment of any kind — it is better to be safe than sorry!

Image 4
Contents DR-M1SLB Safety Precautions Moisture Condensation Some Do’s And Don’ts On The Safe Use Of Equipment Above ALLContents About Discs Recordable/playable discsDVD-RAM Discs DVD-R/RW DiscsDiscs for Playback Only Unplayable DiscsRegion Number Audio CDRecording Medium and Format File Structure of DiscsDVD-RAM DVD-RJPEG/MP3 Disc CD-R/RW/ROM DVD Video MarksMarks related to video Placing a Disc Care and Handling of DiscsFront View Rear View Digital Audio OUT COAXIAL/OPTICALDisc Type/Status Indicator Front Display PanelSimulated Surround Effect Indicator 3D  pg ON-SCREEN Display Disc DisplayRemote Control How To UseCheck Contents Connect the unit to a TV Install the unitConnect the unit to mains After the connection is completed, perform Auto Set Up on Back of unit8To connect to TV’s component video input connectors Connect the unit to TVAuto Set Up Perform Auto Set UpTurn on the unit EnterInitial Settings After Auto Set Up is completed, perform Monitor Set onPerform Preset Download After Preset Download is completed, perform Monitor Set onPress Enter Press rt to move Arrow to T-V Link and press EnterInformation Just ClockAccess the Main Menu screen Access the Video IN/OUT screenComplete the setting Monitor SetAccess the Language SET screen Press w e to move Arrow to DVD SET UP, then press OKLanguage Select the desired languageLanguage Code List Installing Satellite Controller Install a Satellite ControllerAttach the Satellite Controller Make connectionsSetting satellite receiver’s brand and channel Access the SAT/GUIDE PR screenSelect the satellite receiver’s channel for testing Turn on the satellite receiverUnit Auto Standby Direct Rec TV Auto Power OnCheck the result of the test Basic Playback Load a discStart playback Pause playbackLocating a desired scene using the DVD menu Access the DVD menuTop menu Disc menuLocating the start point of the item or skip the item High-Speed SearchSlow Motion Skip SearchResume Function Memorise a resume pointResume playback Mark positionsAngle Selection Switching Time IndicationSubtitle Selection Locating a desired scene using Access the PBC menuWhen you can’t switch the audio channel of a Audio Channel Selection Menu of a Video CD with PBCImage figure of DVD-RAM disc Live Memory PlaybackSuperimpose display Overview of Live Memory Playback Recording screenRecording stops Live Memory Playback screen CheckingDisplay during Live Memory Playback Example of bar meter displayFunctions Available only when pausedLive Check Start One Touch Replay function Start Live Memory PlaybackTo watch a programme previously recorded while recording Using Play Set Up Menu How to Access Play Set Up MenuContents of Play Set Up Menu during playback Before using Play Set Up MenuSelect the menu item Access Play Set Up MenuSelect the option Select the repeat mode Repeat PlaybackLocate the start point Locate the end point and start A-B Repeat PlaybackRandom Playback Programme PlaybackSelect the tracks in the desired order While stoppedSelect the desired item Locating the beginning of a desired selectionSpecify the number of the selected item To cancel the simulated surround effect Enter the timeUse number keys 1-9, 0 to enter the time, then press Press Enter to clear 3D-ON from the screenSelect the switching interval of the slide show Adjusting the picture qualitySetting the progressive mode Access the DVD SET UP screen Enter your passwordParental Lock Select the desired levelTo change the settings Access the password screenChange the level Change the country codeCountry/Area Code List for Parental Lock Playback Operations Set the recording speed Start recordingPause recording Stop recordingInstant Timer Recording ITR Engage the ITR modeSwitch the TV to TV mode Set the recording durationFree Rate Function Receiving Stereo and Bilingual ProgrammesType of Broadcast Being ReceivedAccess the Video Plus+ screen Before performing the Video Plus+ Timer ProgrammingEnter the PlusCode number Check the programme dataAccess the confirmation screen Complete timer programmingEngage the unit’s timer mode Set the following recording options as requiredManual Timer Programming Access Programme Check screenAccess the programme screen Enter the recording dateRefer to step E in Video Plus+ Timer Programming  pg PDC RecordingEnter the recording stop time Enter the channel positionOn-Disc Timer Programming Before performing On-Disc Timer ProgrammingSet DAILY/WEEKLY option Load the discHow discs are overwritten Disengage the timer mode Complete timer correctionChange a programme Programme’s information on the front display panelSelect the desired programme to be cancelled or changed Change the programme settingConfirm the overlapping programmes Check if the conflict has been settledSelect the L-2 Select mode Engage the Automatic Satellite Programme Recording modeREC Mode Programme RecordingIcons Arrow Guidance for operations H Operational commandsIcons and their meanings About editing of programmes About registration of informationLimitations of registration Select the programmes Access the Index screenPress ENTER. Or simply press 4. The playback starts Access the modify screen Modify IndexSelect a programme Register new indexModify Category Modify Programme NameProtect title Access the delete screen Delete programmeDelete unwanted part of the programme Confirm the deletionAccess the Play List screen Create Play ListCreate a play list Confirm the play listAccess the Editing screen Add scenes to a play listMove scenes Confirm the additionConfirm the move Repeat steps C EPlay back play list Delete play listModify Programme Title Select the play listsScan for Programme from library Access the library screenSort the information Register disc Delete informationRegister the disc Confirm the registrationPlayback with MP3/JPEG Navigation Display the item Select the groupSelect the item Select the items in the desired orderDV Dubbing Performing dubbing without using the DV Dubbing controller Prepare the unit for dubbingStart dubbing Stop dubbingSet the unit’s input mode Set the input mode of recording deck Engage the Play mode of the source playerEngage the Record mode of the recording deck Start the source playerAccess the Output/Input Set screen IN/OUT connector1 Output 1 InputInput Setting F-1 Input Select the input mode for the L-2 Decoder connectorSelect the input mode for the Video Video connector 2 SelectSelect the input mode Place a disc and load an MDFor the unit For the digital audio deviceRemote 1/2/3/4 Code Switching Set the TV brand code TV Multi-Brand Remote ControlOperate the TV Satellite Receiver Multi-Brand Remote Control Slide the TV/CABLE/SAT/DVD switch to CABLE/SATSet the satellite receiver brand code Operate the satellite receiverConnecting To a Satellite Receiver Make connections Mode Set Access the Recording SET screenDVD SET UP Function SET UPAudio Output Digital Audio OUTAnalog Audio OUT Range ControlXP Mode REC Audio Recording SETSave AS Library Audio RECPower Save Display SETSuperimpose Grey BackOthers Auto TimerOFF on Video Plus+ System Setup Guide Program Number SetGuide Program Number Enter the Guide Program numberTuner Set Auto Channel SetPerform Auto Channel Set View the Confirmation screenSelect the channel position Manual Channel SetPress w e to select Manual CH SET, then press Delete a Channel 100Change Station Channel Position Set Stations a 101Set Stations B 102 TV Station And ID List103 TV Station Channel Number GuideAccess the Clock SET screen Press w e to select Initial SET UP, then press EnterClock Set 104105 Set Just ClockSet the source channel position for clock data Start the clock operationFormat a disc 106Format a DVD-RAM disc Format a DVD-RW discCancel the finalisation of a DVD-RWdisc Finalise a disc107 Finalise a DVD-R/RW discScan Mode Set Set the scan mode108 Press Progressive Scan for 2 or more seconds109 General110 Recording111 ON-SCREEN Messages112 ON-SCREEN Messages113 DTSJpeg MpegTUNER/TIMER Accessories114 General115 Auto Channel SetDelete programme Disc menu Discs for Playback Only Subtitle Selection Time Search Top menuDR-M1SLB