106 | SUBSIDIARY SETTINGS (cont.) |
Format a disc
Some
Format the disc when you use an unformatted disc or you want to delete all recordings and data on the disc.
ATTENTION:
●When a disc is formatted, all recordings and data are erased. It is impossible to restore them.
●Never turn off the unit or disconnect the mains power cord while “NOW FORMATTING...” is displayed on the TV screen.
●Turn on the unit.
●Turn on the TV and select the AV mode.
●Slide the TV/CABLE/SAT/DVD switch to DVD.
●Load a
Format a DVD-RAM disc
A Access the Main Menu screen.
Press SET UP.
B Access the “UTILITY” screen.
APress rt w e to select
“DVD SET UP”, then press
ENTER.
B Press w e to select “UTILITY”, then press
ENTER.
C Format the disc.
APress rt to select “FORMAT”, then press ENTER. Press w e to select “YES”, then press ENTER when “DISC WILL BE FORMATTED” appears on the TV screen.
BPress w e to select “OK”, then press ENTER when “DISC FORMATTING WAS SELECTED” appears on the TV screen.
Format a DVD-RW disc
Perform steps A to B of “Format a
A Format the disc.
APress rt to select “FORMAT”, then press ENTER. Press w e to choose “VR MODE” or “VIDEO MODE”,
then press ENTER when “DISC WILL BE FORMATTED” appears on the TV screen.
“VR MODE”: To be chosen when you want to record, erase, or edit data on the disc repeatedly.
“VIDEO MODE”:To be chosen when you want to erase all the data on the disc once played back to record new data, or play the disc on other DVD players.
BPress w e to select “YES”, then press ENTER when
“DISC WILL BE FORMATTED IN VR MODE/VIDEO MODE” appears on the TV screen.
NOTES:
●It is impossible to format Version 1.0
●It is impossible to format
●All the programmes on a disc will be deleted once the disc is formatted even if they are protected titles. ( pg. 70, “Protect title”)