JVC LPT0827-001B Instant Timer Recording ITR, Engage the ITR mode, Set the recording duration

Page 54

54

RECORDING (cont.)

Recording Features

Instant Timer Recording (ITR)

This easy method lets you record for from 30 minutes to 6 hours

 

(selectable in 30-min. increments), and shuts the unit off after

 

recording is finished.

 

1 Start recording.

 

Press 7 on the unit.

 

2 Engage the ITR mode.

 

Press 7 again. On the front display panel, “0:30”

 

appears.

 

3 Set the recording duration.

 

If you want to record for more than 30 minutes, press 7

 

to extend the time. Each press extends recording time by

 

30 minutes.

 

NOTES:

 

● You can only perform ITR using the 7 button on the unit’s

 

front panel.

 

● If “DIRECT REC” is set to “ON” in the menu, Instant Timer

 

Recording (ITR) function does not work. ( pg. 94)

Recording Speed

MPEG2 format is used as recording format. As a guide for picture quality, the “bps” unit is used to represent how much data can be recorded per second. The larger this value is, the better the picture quality becomes but more capacity is required for the recording. Select XP or SP for programmes where quick movement occurs, such as sports programmes, and LP or EP for talk shows, etc. with relatively less movement.

The recording speeds for a 4.7 GB disc are set as follows:

Recording

Recording amount

Maximum recording

speed

(approx.)

time (approx.)

 

 

 

XP

10 Mbps

1 hour

 

 

 

SP

5 Mbps

2 hours

 

 

 

LP

2 Mbps

4 hours

 

 

 

EP

1.6 Mbps

6 hours

 

 

 

FR60–FR360

The amount varies

6 hours

( pg. 55)

depending on the

 

 

selected time.

 

 

 

 

Watch Another Programme While Recording on the Unit

While recording is going on, you can watch another programme on the TV by using the TV’s tuner. It is required that the remote control is set to be able to operate the TV in advance.

( pg. 88, “TV Multi-Brand Remote Control”)

1Switch the TV to TV mode.

During recording, press (VIDEO) to select TV mode.

●Video mode is disengaged and the video indicator on the unit is turned off.

●The programme received on the TV’s tuner is displayed on the TV screen.

2Switch the remote control to TV control mode.

Slide the TV/CABLE/SAT/DVD switch to TV.

3Select the desired channel.

Press PR +/– repeatedly.

Elapsed Recording Time and Disc Remaining Time Indication

During recording, press DISPLAY repeatedly until the desired indication appears on the front display panel.

●Each time you press DISPLAY, the time indication changes as follows:

Elapsed recording time ] Disc remaining time ] Clock ] (Back to the beginning)

●There is another way to check the disc remaining time. While the unit is stopped or recording is in progress, press REMAIN. The list of disc remaining times for all recording speeds appears on the TV screen.

Page 53 Page 55
Image 54
Page 53 Page 55
Contents DR-M1SLB Safety Precautions Moisture Condensation Some Do’s And Don’ts On The Safe Use Of Equipment Above ALLContents DVD-RAM Discs About DiscsRecordable/playable discs DVD-R/RW DiscsRegion Number Discs for Playback OnlyUnplayable Discs Audio CDDVD-RAM Recording Medium and FormatFile Structure of Discs DVD-RDVD Video Marks JPEG/MP3 Disc CD-R/RW/ROMMarks related to video Placing a Disc Care and Handling of DiscsFront View Rear View Digital Audio OUT COAXIAL/OPTICALDisc Type/Status Indicator Front Display PanelSimulated Surround Effect Indicator 3D  pg ON-SCREEN Display Disc DisplayRemote Control How To UseCheck Contents Install the unit Connect the unit to a TVConnect the unit to mains After the connection is completed, perform Auto Set Up on Back of unit8To connect to TV’s component video input connectors Connect the unit to TVTurn on the unit Auto Set UpPerform Auto Set Up EnterInitial Settings After Auto Set Up is completed, perform Monitor Set onPress Enter Perform Preset DownloadAfter Preset Download is completed, perform Monitor Set on Press rt to move Arrow to T-V Link and press EnterInformation Just ClockComplete the setting Access the Main Menu screenAccess the Video IN/OUT screen Monitor SetLanguage Access the Language SET screenPress w e to move Arrow to DVD SET UP, then press OK Select the desired languageLanguage Code List Attach the Satellite Controller Installing Satellite ControllerInstall a Satellite Controller Make connectionsSelect the satellite receiver’s channel for testing Setting satellite receiver’s brand and channelAccess the SAT/GUIDE PR screen Turn on the satellite receiverTV Auto Power On Unit Auto Standby Direct RecCheck the result of the test Start playback Basic PlaybackLoad a disc Pause playbackTop menu Locating a desired scene using the DVD menuAccess the DVD menu Disc menuSlow Motion Locating the start point of the item or skip the itemHigh-Speed Search Skip SearchResume playback Resume FunctionMemorise a resume point Mark positionsSwitching Time Indication Angle SelectionSubtitle Selection When you can’t switch the audio channel of a Locating a desired scene usingAccess the PBC menu Audio Channel Selection Menu of a Video CD with PBCLive Memory Playback Image figure of DVD-RAM discSuperimpose display Recording stops Overview of Live Memory PlaybackRecording screen Live Memory Playback screen CheckingDisplay during Live Memory Playback Example of bar meter displayAvailable only when paused FunctionsLive Check Start Live Memory Playback Start One Touch Replay functionTo watch a programme previously recorded while recording Contents of Play Set Up Menu during playback Using Play Set Up MenuHow to Access Play Set Up Menu Before using Play Set Up MenuAccess Play Set Up Menu Select the menu itemSelect the option Locate the start point Select the repeat modeRepeat Playback Locate the end point and start A-B Repeat PlaybackSelect the tracks in the desired order Random PlaybackProgramme Playback While stoppedLocating the beginning of a desired selection Select the desired itemSpecify the number of the selected item Use number keys 1-9, 0 to enter the time, then press To cancel the simulated surround effectEnter the time Press Enter to clear 3D-ON from the screenAdjusting the picture quality Select the switching interval of the slide showSetting the progressive mode Parental Lock Access the DVD SET UP screenEnter your password Select the desired levelChange the level To change the settingsAccess the password screen Change the country codeCountry/Area Code List for Parental Lock Playback Operations Pause recording Set the recording speedStart recording Stop recordingSwitch the TV to TV mode Instant Timer Recording ITREngage the ITR mode Set the recording durationType of Broadcast Being Free Rate FunctionReceiving Stereo and Bilingual Programmes ReceivedEnter the PlusCode number Access the Video Plus+ screenBefore performing the Video Plus+ Timer Programming Check the programme dataEngage the unit’s timer mode Access the confirmation screenComplete timer programming Set the following recording options as requiredAccess the programme screen Manual Timer ProgrammingAccess Programme Check screen Enter the recording dateEnter the recording stop time Refer to step E in Video Plus+ Timer Programming  pgPDC Recording Enter the channel positionOn-Disc Timer Programming Before performing On-Disc Timer ProgrammingSet DAILY/WEEKLY option Load the discHow discs are overwritten Change a programme Disengage the timer modeComplete timer correction Programme’s information on the front display panelConfirm the overlapping programmes Select the desired programme to be cancelled or changedChange the programme setting Check if the conflict has been settledREC Mode Select the L-2 Select modeEngage the Automatic Satellite Programme Recording mode Programme RecordingArrow Guidance for operations H Operational commands IconsIcons and their meanings About registration of information About editing of programmesLimitations of registration Access the Index screen Select the programmesPress ENTER. Or simply press 4. The playback starts Select a programme Access the modify screenModify Index Register new indexModify Programme Name Modify CategoryProtect title Delete unwanted part of the programme Access the delete screenDelete programme Confirm the deletionCreate a play list Access the Play List screenCreate Play List Confirm the play listMove scenes Access the Editing screenAdd scenes to a play list Confirm the additionConfirm the move Repeat steps C EModify Programme Title Play back play listDelete play list Select the play listsAccess the library screen Scan for Programme from librarySort the information Register the disc Register discDelete information Confirm the registrationPlayback with MP3/JPEG Navigation Select the item Display the itemSelect the group Select the items in the desired orderDV Dubbing Start dubbing Performing dubbing without using the DV Dubbing controllerPrepare the unit for dubbing Stop dubbingSet the unit’s input mode Engage the Record mode of the recording deck Set the input mode of recording deckEngage the Play mode of the source player Start the source player1 Output Access the Output/Input Set screenIN/OUT connector 1 InputSelect the input mode for the Video Video connector Input Setting F-1 InputSelect the input mode for the L-2 Decoder connector 2 SelectFor the unit Select the input modePlace a disc and load an MD For the digital audio deviceRemote 1/2/3/4 Code Switching TV Multi-Brand Remote Control Set the TV brand codeOperate the TV Set the satellite receiver brand code Satellite Receiver Multi-Brand Remote ControlSlide the TV/CABLE/SAT/DVD switch to CABLE/SAT Operate the satellite receiverConnecting To a Satellite Receiver Make connections DVD SET UP Mode SetAccess the Recording SET screen Function SET UPAnalog Audio OUT Audio OutputDigital Audio OUT Range ControlSave AS Library XP Mode REC AudioRecording SET Audio RECSuperimpose Power SaveDisplay SET Grey BackAuto Timer OthersOFF on Guide Program Number Video Plus+ System SetupGuide Program Number Set Enter the Guide Program numberPerform Auto Channel Set Tuner SetAuto Channel Set View the Confirmation screenManual Channel Set Select the channel positionPress w e to select Manual CH SET, then press 100 Delete a ChannelChange Station Channel Position 101 Set Stations aSet Stations B 102 TV Station And ID List103 TV Station Channel Number GuideClock Set Access the Clock SET screenPress w e to select Initial SET UP, then press Enter 104Set the source channel position for clock data 105Set Just Clock Start the clock operationFormat a DVD-RAM disc Format a disc106 Format a DVD-RW disc107 Cancel the finalisation of a DVD-RWdiscFinalise a disc Finalise a DVD-R/RW disc108 Scan Mode SetSet the scan mode Press Progressive Scan for 2 or more seconds109 General110 Recording111 ON-SCREEN Messages112 ON-SCREEN MessagesJpeg 113DTS Mpeg114 TUNER/TIMERAccessories GeneralDelete programme Disc menu Discs for Playback Only 115Auto Channel Set Subtitle Selection Time Search Top menuDR-M1SLB
Top Page Image Contents