JVC LPT0827-001B, DR-M1SLB manual Before performing On-Disc Timer Programming

Page 60

60	TIMER RECORDING (cont.)

On-Disc Timer

Programming

On-Disc Timer Programming is a function used with discs that are especially intended for a specific programme. The disc is then programmed for a programme you always watch every day or every week. Since older programs are automatically overwritten, a single DVD-RAM/RW (VR mode) disc can be used without worrying about how much recording capacity remains. ( pg. 62, “How discs are overwritten”)

You can programme each disc to timer-record as many as

8programmes.

Before performing On-Disc Timer Programming:

●Turn on the unit.

●Turn on the TV and select the AV mode.

●Slide the TV/CABLE/SAT/DVD switch to DVD.

●Make sure that the unit’s built-in clock is set properly.

ATTENTION:

●On-Disc Timer Programming is possible only with the disc for On-Disc Timer Programming.

●If data is recorded on a disc for On-Disc Timer Programming using a unit from another manufacturer, On- Disc Timer Programming may no longer function properly.

To make the disc for On-Disc Timer Programming

A Load a disc.

APress x to open the disc tray.

BPlace a recordable disc on the disc tray.

● For details, refer to “Placing a Disc” ( pg. 10).

CPress x to close the disc tray.

B Access Programme Check screen.

Press PROG/CHECK.

C Access the programme screen.

When On-Disc Timer Programming is made for the first time on the disc

Press rt repeatedly to select “DISC TIMER PRGM”, then press ENTER.

●When some programmes are recorded on the disc, a caution message appears. In such a case, backup the programmes as

required, then format the disc before making On-Disc Timer Programming. ( pg. 106, “Format a disc”)

When On-Disc Timer Programming has already been made on the disc

Press rt repeatedly to select “NEW TIMER PROGRAMME”, then press ENTER.

D Enter the recording date.

Press rt repeatedly to set the desired date.

●The current date appears on the TV screen. The date you enter appears in its place.

E Enter the recording start time.

Press w e to select “START”, then press rt repeatedly to set the desired start time.

●Each press of rt advances/goes back the start time in 1-min. increments.

●To advance/go back the start time in 30-min. increments, press and hold rt.

Image 60

Contents DR-M1SLB Safety Precautions Moisture Condensation Some Do’s And Don’ts On The Safe Use Of Equipment Above ALLContents About Discs Recordable/playable discsDVD-RAM Discs DVD-R/RW DiscsDiscs for Playback Only Unplayable DiscsRegion Number Audio CDRecording Medium and Format File Structure of DiscsDVD-RAM DVD-RDVD Video Marks JPEG/MP3 Disc CD-R/RW/ROMMarks related to video Placing a Disc Care and Handling of DiscsFront View Rear View Digital Audio OUT COAXIAL/OPTICALDisc Type/Status Indicator Front Display PanelSimulated Surround Effect Indicator 3D pg ON-SCREEN Display Disc DisplayRemote Control How To UseCheck Contents Install the unit Connect the unit to a TVConnect the unit to mains After the connection is completed, perform Auto Set Up on Back of unit8To connect to TV’s component video input connectors Connect the unit to TVAuto Set Up Perform Auto Set UpTurn on the unit EnterInitial Settings After Auto Set Up is completed, perform Monitor Set onPerform Preset Download After Preset Download is completed, perform Monitor Set onPress Enter Press rt to move Arrow to T-V Link and press EnterInformation Just ClockAccess the Main Menu screen Access the Video IN/OUT screenComplete the setting Monitor SetAccess the Language SET screen Press w e to move Arrow to DVD SET UP, then press OKLanguage Select the desired languageLanguage Code List Installing Satellite Controller Install a Satellite ControllerAttach the Satellite Controller Make connectionsSetting satellite receiver’s brand and channel Access the SAT/GUIDE PR screenSelect the satellite receiver’s channel for testing Turn on the satellite receiverTV Auto Power On Unit Auto Standby Direct RecCheck the result of the test Basic Playback Load a discStart playback Pause playbackLocating a desired scene using the DVD menu Access the DVD menuTop menu Disc menuLocating the start point of the item or skip the item High-Speed SearchSlow Motion Skip SearchResume Function Memorise a resume pointResume playback Mark positionsSwitching Time Indication Angle SelectionSubtitle Selection Locating a desired scene using Access the PBC menuWhen you can’t switch the audio channel of a Audio Channel Selection Menu of a Video CD with PBCLive Memory Playback Image figure of DVD-RAM discSuperimpose display Overview of Live Memory Playback Recording screenRecording stops Live Memory Playback screen CheckingDisplay during Live Memory Playback Example of bar meter displayAvailable only when paused FunctionsLive Check Start Live Memory Playback Start One Touch Replay functionTo watch a programme previously recorded while recording Using Play Set Up Menu How to Access Play Set Up MenuContents of Play Set Up Menu during playback Before using Play Set Up MenuAccess Play Set Up Menu Select the menu itemSelect the option Select the repeat mode Repeat PlaybackLocate the start point Locate the end point and start A-B Repeat PlaybackRandom Playback Programme PlaybackSelect the tracks in the desired order While stoppedLocating the beginning of a desired selection Select the desired itemSpecify the number of the selected item To cancel the simulated surround effect Enter the timeUse number keys 1-9, 0 to enter the time, then press Press Enter to clear 3D-ON from the screenAdjusting the picture quality Select the switching interval of the slide showSetting the progressive mode Access the DVD SET UP screen Enter your passwordParental Lock Select the desired levelTo change the settings Access the password screenChange the level Change the country codeCountry/Area Code List for Parental Lock Playback Operations Set the recording speed Start recordingPause recording Stop recordingInstant Timer Recording ITR Engage the ITR modeSwitch the TV to TV mode Set the recording durationFree Rate Function Receiving Stereo and Bilingual ProgrammesType of Broadcast Being ReceivedAccess the Video Plus+ screen Before performing the Video Plus+ Timer ProgrammingEnter the PlusCode number Check the programme dataAccess the confirmation screen Complete timer programmingEngage the unit’s timer mode Set the following recording options as requiredManual Timer Programming Access Programme Check screenAccess the programme screen Enter the recording dateRefer to step E in Video Plus+ Timer Programming pg PDC RecordingEnter the recording stop time Enter the channel positionOn-Disc Timer Programming Before performing On-Disc Timer ProgrammingSet DAILY/WEEKLY option Load the discHow discs are overwritten Disengage the timer mode Complete timer correctionChange a programme Programme’s information on the front display panelSelect the desired programme to be cancelled or changed Change the programme settingConfirm the overlapping programmes Check if the conflict has been settledSelect the L-2 Select mode Engage the Automatic Satellite Programme Recording modeREC Mode Programme RecordingArrow Guidance for operations H Operational commands IconsIcons and their meanings About registration of information About editing of programmesLimitations of registration Access the Index screen Select the programmesPress ENTER. Or simply press 4. The playback starts Access the modify screen Modify IndexSelect a programme Register new indexModify Programme Name Modify CategoryProtect title Access the delete screen Delete programmeDelete unwanted part of the programme Confirm the deletionAccess the Play List screen Create Play ListCreate a play list Confirm the play listAccess the Editing screen Add scenes to a play listMove scenes Confirm the additionConfirm the move Repeat steps C EPlay back play list Delete play listModify Programme Title Select the play listsAccess the library screen Scan for Programme from librarySort the information Register disc Delete informationRegister the disc Confirm the registrationPlayback with MP3/JPEG Navigation Display the item Select the groupSelect the item Select the items in the desired orderDV Dubbing Performing dubbing without using the DV Dubbing controller Prepare the unit for dubbingStart dubbing Stop dubbingSet the unit’s input mode Set the input mode of recording deck Engage the Play mode of the source playerEngage the Record mode of the recording deck Start the source playerAccess the Output/Input Set screen IN/OUT connector1 Output 1 InputInput Setting F-1 Input Select the input mode for the L-2 Decoder connectorSelect the input mode for the Video Video connector 2 SelectSelect the input mode Place a disc and load an MDFor the unit For the digital audio deviceRemote 1/2/3/4 Code Switching TV Multi-Brand Remote Control Set the TV brand codeOperate the TV Satellite Receiver Multi-Brand Remote Control Slide the TV/CABLE/SAT/DVD switch to CABLE/SATSet the satellite receiver brand code Operate the satellite receiverConnecting To a Satellite Receiver Make connections Mode Set Access the Recording SET screenDVD SET UP Function SET UPAudio Output Digital Audio OUTAnalog Audio OUT Range ControlXP Mode REC Audio Recording SETSave AS Library Audio RECPower Save Display SETSuperimpose Grey BackAuto Timer OthersOFF on Video Plus+ System Setup Guide Program Number SetGuide Program Number Enter the Guide Program numberTuner Set Auto Channel SetPerform Auto Channel Set View the Confirmation screenManual Channel Set Select the channel positionPress w e to select Manual CH SET, then press 100 Delete a ChannelChange Station Channel Position 101 Set Stations aSet Stations B 102 TV Station And ID List103 TV Station Channel Number GuideAccess the Clock SET screen Press w e to select Initial SET UP, then press EnterClock Set 104105 Set Just ClockSet the source channel position for clock data Start the clock operationFormat a disc 106Format a DVD-RAM disc Format a DVD-RW discCancel the finalisation of a DVD-RWdisc Finalise a disc107 Finalise a DVD-R/RW discScan Mode Set Set the scan mode108 Press Progressive Scan for 2 or more seconds109 General110 Recording111 ON-SCREEN Messages112 ON-SCREEN Messages113 DTSJpeg MpegTUNER/TIMER Accessories114 General115 Auto Channel SetDelete programme Disc menu Discs for Playback Only Subtitle Selection Time Search Top menuDR-M1SLB