
82 | EDITING (cont.) |
Edit From A Camcorder
You can use a camcorder as the source player and your unit as the recording deck.
Slide the TV/CABLE/SAT/DVD switch to DVD.
A Make connections.
A If the camcorder has no | A If the camcorder has no | |
— connect the camcorder’s AUDIO OUT and VIDEO | ||
| ||
AUDIO input | OUT connectors to the unit’s AUDIO and VIDEO | |
Recorder | input connectors on the front panel. | |
| B If the camcorder has an | |
| — connect the camcorder’s AUDIO OUT and | |
| ||
|
| |
| ● When using a monaural camcorder, connect its AUDIO OUT | |
| connector to the AUDIO L input connector on your unit. | |
VIDEO input | B Set the unit’s input mode. | |
| ||
Video cable (not provided) | Press PR +/– to set the channel to | |
● Set | ||
| or | |
| the connector being used. ( pg. 85, | |
| ||
VIDEO OUT | C Set the recording speed. | |
| ||
Audio cable (not provided) | Press REC MODE repeatedly until the desired recording | |
Camcorder | ||
| speed appears. | |
AUDIO OUT | D Prepare the camcorder for dubbing. | |
Player | ||
| Start playback on the camcorder slightly before the actual | |
B If the camcorder has an | point from where you wish to start dubbing. | |
| ||
AUDIO input | E Start dubbing. | |
Recorder |
| |
| Press and hold 7, then press 4 on the remote control, or | |
| press 7 on the unit. | |
| F Stop dubbing. | |
Press 8 on the unit, then stop playback on the | ||
camcorder. | ||
| NOTES: | |
| ● All necessary cables can be obtained from your dealer. | |
| ● Refer to the camcorder’s instruction manual for operating | |
procedure. | ||
| ● The quality of dubbed picture becomes poorer than that of the | |
| original. |
Audio cable (not provided)
Camcorder
AUDIO OUT
Player