61
F Enter the recording stop time.
Press w e to select “STOP”, then press rt repeatedly to set the desired stop time.
●Each press of rt advances/goes back the stop time in
●To advance/go back the stop time in
G Enter the channel position.
Press w e to select “TV PROG”, then press rt repeatedly to select the desired channel.
H Set “DAILY/WEEKLY” option.
Refer to step E in “VIDEO Plus+® Timer Programming” ( pg. 56).
●It is necessary to set “DAILY/WEEKLY” option for
I Set the other recording options as required.
Refer to step E in “VIDEO Plus+® Timer Programming” ( pg. 56).
J Access the confirmation screen.
Press ENTER.
K Complete timer programming.
Press ENTER.
●To programme another timer, repeat steps B – K.
Satellite Receiver Users
To
APerform “Satellite Receiver Control Setting” on page 28.
BPerform
CLeave the satellite receiver’s power on.
To timer-record the programme with the programmed disc
A Load the disc.
APress x to open the disc tray.
BPlace the programmed disc on the disc tray.
● For details, refer to “Placing a Disc” ( pg. 10).
CPress x to close the disc tray.
B Engage the unit’s timer mode.
Press DVD 1. The unit turns off and “ ” appears on the front display panel.
●To disengage the timer mode, press DVD 1 again.
NOTES:
●Even if
●
●The information of a programme recorded with
●The play list is not created for the programmes recorded with
●VIDEO Plus+ Timer Programming is not possible on the discs used exclusively for
●Manual Timer Programming is not possible on the
●Basic Recording is not possible on the
●The
●The beginning of a programme may not be recorded. Also, if the 1st programme’s recording stop time and the 2nd programme’s recording start time is the same, the ending of the 1st programme may not be recorded.
●If there is a power cut while recording, the recordings before the power cut are not guaranteed.