JVC LPT0827-001B manual Recording SET, Save AS Library, XP Mode REC Audio, Audio REC, Direct REC

94 SUBSIDIARY SETTINGS (cont.)

RECORDING SET

(The boldface settings in the table below indicate the settings at your purchase.)

8 SAVE AS LIBRARY	When this function is set to “ON”, the recording information is automatically
OFF	stored in the library. For details, refer to “Modify Library Information”
ON	( pg. 76).
8 XP MODE REC AUDIO	You can select the audio format when you record a programme in XP mode.
DOLBY DIGITAL	When this function is set to “LINEAR PCM”, you can obtain a high-quality
LINEAR PCM	audio sound.
	DOLBY DIGITAL:
	To record in Dolby Digital format.
	LINEAR PCM:
	To record in Linear PCM format.
8 AUDIO REC	You can select the desired NICAM audio channel to be recorded on a DVD-R/
NICAM 1/MAIN	RW (Video mode) disc.
NICAM 2/SUB	NICAM 1/MAIN:
MONO	To record the main language of NICAM audio.
	NICAM 2/SUB:
	To record the sub language of NICAM audio.
	MONO:
	To record the standard (monaural) sound of NICAM audio.
	NOTE:
	This function works only for the NICAM bilingual programme.
8 DIRECT REC	When this function is set to “ON”, you can easily start recording the
OFF	programme that you are watching on your TV. Press and hold 7 and press 4
ON	on the remote control, or press 7 on the unit.
	NOTES:
	● When you use the Direct Rec function, be sure to use a TV offering T-V LINK, etc. and
	connect a fully-wired 21-pin SCART cable between the unit and the TV. ( pg. 18)
	● If “DIRECT REC” is set to “OFF”, the 7 button functions as described in “Basic
	Recording” ( pg. 53).
	● During Direct Rec, “– –” appears on the front display panel.
	● If a programme is recorded with the Direct Rec, the station name will not be registered
	in the library. “– – – –” will be displayed for the station name.
	● Even if there is no power supply for more than 60 minutes, the unit keeps the setting.