JVC DR-MV5SEK, DR-MV5BEK manual Video Plus+ System Setup, Guide Program Number Set

DVD SET UP FUNCTION SET UP INITIAL SET UP

Filename [MV5SEK_13Subsidiary.fm]
MV5SEK_00.book Page 83 Wednesday, August 31, 2005 7:58 PM	Masterpage:Right+

SUBSIDIARY SETTINGS EN 83

VIDEO Plus+ System Setup

IMPORTANT:

Normally, Auto Set Up ( pg. 17), Preset Download ( pg. 18) or Auto Channel Set ( pg. 84) sets the Guide Program numbers automatically. You need to set the Guide Program numbers manually only in the following cases.

●When timer-programming with the VIDEO Plus+ system, the channel position, where the station you wish to record is received on your unit, is not selected,

OR

when you add a channel after Auto Set Up, Preset Download or Auto Channel Set has taken place,

—Set the Guide Program number for that station manually.

●When you wish to timer-record a satellite programme with the SHOWVIEW system,

—Set the Guide Program numbers for all satellite broadcasts received on your satellite receiver.

●Turn on the unit.

●Turn on the TV and select the AV mode.

●Slide the TV/DVD switch to DVD.

VHS

Guide Program Number Set

1 Press SET UP to access the Main Menu screen.

2 Press w e to select “INITIAL SET UP”, then press t. 3 Press w e to select “GUIDE

PR”, then press t.	AUTO CH SET MANUAL CH SET		GUIDE PR CLOCK SET
4 Press rt to select “GUIDE	GUIDE PROGRAMME		1
	TV PROGRAMME		F-1
PROGRAMME”, then press
ENTER.
5 Press rt to select the Guide	SET UP	OK	THEN PRESS [ENTER]
Program number for the desired
			SELECT WITH [CURSORS]
station as shown in the TV	EXIT	SELECT

listings. Then press ENTER.

●To change the Guide Program number in 10 increments, press and hold rt.

6 Press rt to select “TV PROGRAMME”, then press ENTER.

7 Press rt to select the number of the unit’s channel position on which the Guide Program number’s broadcast is received by the unit or the satellite receiver. Then press ENTER.

●If the satellite broadcast is received on your unit’s auxiliary channel “L-2”, select “L-2” for the channel position.

●Repeat steps 4 and 7 as necessary.

8 Press SET UP to complete the setting.

Guide Program Number

“Guide Program (GUIDE PROGRAMME) number” refers to the assigned TV station numbers, according to broadcast area, for the VIDEO Plus+ timer recording. The Guide Program numbers can be found in most TV listings.

ENTER

SET UP

Page 83Wednesday, 31 August 2005 19:58