JVC DR-MV5BEK, DR-MV5SEK manual Clock Set, Just Clock

EXIT

Filename [MV5SEK_13Subsidiary.fm]
MV5SEK_00.book Page 88 Wednesday, August 31, 2005 7:58 PM	Masterpage:Left+

88 EN SUBSIDIARY SETTINGS

Clock Set	1 Press w e to select “INITIAL SET UP”, then press t.
	2 Press w e to select “CLOCK	DVD SET UP FUNCTION SET UP		INITIAL SET UP
	SET”, then press t.	AUTO CH SET	MANUAL CH SET	GUIDE PR	CLOCK SET

IMPORTANT:

If you performed Auto Set Up ( pg. 17) or Preset Download ( pg. 18), without ever having set the clock previously, the unit’s built-in clock is also set automatically.

Perform the following steps only if —

—Auto Clock Set has not been performed correctly by Auto Set Up or Preset Download.

OR

—you want to change Just Clock setting. ( “Just Clock” in the right column)

●Turn on the unit.

●Turn on the TV and select the AV mode.

●Slide the TV/DVD switch to DVD.

VHS DVD

ENTER

SET UP

3 Press rt to select “YEAR”,
		YEAR			2005
then press ENTER. Press rt to
		DATE			05/07 (SAT)
set the year, then press ENTER.		TIME			18:56
● Repeat the same procedure to set		JUST CLOCK			OFF
		TV PROGRAMME			18
the date and time. When you set
	SET UP		OK	SELECT WITH [CURSORS]
the time, press and hold rt to			SELECT	THEN PRESS [ENTER]

change the time by 30 minutes.

●When you set the date, press and hold rt to change the date by 15 days.

4 Press rt to select “JUST CLOCK”, then press ENTER. Press rt to set to the desired mode, then press ENTER.

●The default setting is “OFF”.

●For the Just clock function, refer to “Just Clock” below.

●If you set to “OFF”, you can disregard the next step as you won’t be able to receive regular clock adjustments.

5 Press rt to select “TV PROGRAMME”, then press ENTER. Press rt to set the channel position to the number representing the station transmitting clock setting data, then press ENTER.

●The unit is preset to receive clock setting and adjustment data from channel position 1.

6 Press SET UP to start the clock operation.

NOTES:

●Just Clock (when set to “ON”) adjusts the unit’s built-in clock every hour, except for 23:00, 0:00, 1:00 and 2:00.

●Just Clock is not effective when:

—the unit’s power is on.

—the unit is in the Timer mode.

—a difference of more than 3 minutes exists between the built-in clock’s time and the actual time.

—the unit is in the Automatic Satellite Programme Recording mode. ( pg. 36) (DVD deck only)

—the unit is in the Power Save mode. ( pg. 79)

—“L-2 SELECT” is set to “SAT VIDEO/RGB”. ( pg. 45)

●If Just Clock is set to “ON”, the unit’s clock is automatically adjusted at the start/end of Summer Time.

●Just Clock may not function properly depending on the reception condition.

Just Clock

The Just Clock function provides accurate time keeping through automatic adjustments at regular intervals, by reading data from a PDC signal.

The Just Clock option can be set to “ON” or “OFF” at the Clock Set screen (the default setting is “OFF”).

IMPORTANT:

If you turn off Just Clock, the accuracy of your unit’s built-in clock may be reduced, which could adversely effect timer recording. We recommend you to keep Just Clock on. In cases where the clock setting data from a PDC signal is incorrect, however, you are advised to keep Just Clock set to “OFF”.

Page 88Wednesday, 31 August 2005 19:58