JVC DR-MV5SEK, DR-MV5BEK manual Recording SET

Filename [MV5SEK_13Subsidiary.fm]
MV5SEK_00.book Page 79 Wednesday, August 31, 2005 7:58 PM	Masterpage:Right+

SUBSIDIARY SETTINGS EN 79

RECORDING SET

8SAVE AS LIBRARY — OFF / ON

When this function is set to “ON”, the recording information is automatically stored in the library. For details, refer to “Modify Library Information” ( pg. 71).

8XP MODE REC AUDIO — DOLBY DIGITAL / LINEAR PCM

You can select the audio format when you record a title in XP mode. When this function is set to “LINEAR PCM”, you can obtain a high-quality audio sound.

DOLBY DIGITAL: To record in Dolby Digital format.

LINEAR PCM: To record in Linear PCM format.

8AUDIO REC — NICAM 1/MAIN / NICAM 2/SUB / MONO

You can select the desired NICAM audio channel to be recorded on a DVD-R/RW (Video mode) disc.

NICAM 1/MAIN: To record the main language of NICAM audio.

NICAM 2/SUB: To record the sub language of NICAM audio.

MONO: To record the standard (monaural) sound of NICAM audio.

NOTE:

This function works only for the NICAM bilingual programme.

8DIRECT REC — OFF / ON

When this function is set to “ON”, you can easily start recording the programme that you are watching on your TV. Press and hold 7 and press 4 on the remote control, or press 7 on the unit.

NOTES:

●When you use the Direct Rec function, be sure to use a TV offering T-V LINK, etc. and connect a fully-wired 21-pin SCART cable between the unit and the TV. ( pg. 15)

●If “DIRECT REC” is set to “OFF”, the 7 button functions as described in “Basic Recording (DVD)” ( pg. 26) or “Basic Recording (VHS)” ( pg. 28).

●During Direct Rec, “– –” appears on the front display panel.

●If a programme is recorded with the Direct Rec, the station name will not be registered in the library. “– – – –” will be displayed for the station name.

●Even if there is no power supply for more than 60 minutes, the unit keeps the setting.

DISPLAY SET

8SUPERIMPOSE — OFF / AUTO

When this function is set to “AUTO”, various operational indicators appear on the TV screen.

OFF: To turn off superimposed indications.

AUTO: To superimpose operational indications for approximately five seconds just after the corresponding operation.

NOTES:

●Even when “SUPERIMPOSE” is set to “OFF”, you can display the various operational indicators by pressing ON SCREEN. To clear the operational indicators, press ON SCREEN again.

●When you use this unit as the source player for editing, be sure to set “SUPERIMPOSE” to “OFF” before starting.

●When you select “AUTO”, during playback, the operation mode indicators may be disturbed depending on the type of disc being used.

8GREY/BLUE BACK — OFF / ON

When this function is set to “ON”, the TV screen becomes all grey (DVD deck)/blue (VHS deck) when receiving a channel not in use.

NOTE:

When you want to receive an unstable channel with poor signals, set this function to “OFF”.

8DIMMER — BRIGHT / DIMMED1 / DIMMED2 / OFF

You can change the brightness of the front display panel. BRIGHT: To turn on the light on the front display panel. (Blue lamp

on the front display panel is turned on.)

DIMMED1/DIMMED2: To change the brightness level. (Blue lamp on the front display panel is turned off.)

OFF: To turn off the light on the front display panel. (Blue lamp on the front display panel is turned off.)

8POWER SAVE — OFF / ON

When this function is set to “ON”, you can reduce the power consumption while the unit is turned off.

●During Power Save mode —

—the front display panel will be turned off.

—the Just Clock function ( pg. 88) does not work.

●Power Save does not work when —

—the unit is in the Timer mode.

—the unit’s power is turned off after timer-recording or Instant Timer Recording.

—“L-2 SELECT” is set to “DECODER” or “SAT VIDEO/RGB”. ( pg. 45)

●It takes some time for the unit to complete initialisation after you turn on the unit power, with “HELLO” blinking on the front display panel.

Page 79Wednesday, 31 August 2005 19:58