LG Electronics setup guide View HCS6300 System Information

Page 18

Configuration Options via GUI (Cont.)

Example: Controller Menu

View HCS6300 System Information

With the Controller Menu on display, click on the Read button at the right of the System Information field to display HCS6300 hardware and software information.

The System Information display contains important information about the HCS6300, including the unit hardware ID (firmware version), software versions, IP address, MAC address, and serial number, for example:

System Information
Model:	HCS6300
Hardware ID:	6300-v1.7-2010-0715
OS version:	HCS6300-1084-2012-0112
Application version:	2.1
IP address:	10.166.60.84
MAC address:	00:0C:63:3a:00:07
Serial#:	901-12420014

It is recommended that you record this information for future reference. If you find it necessary to call customer service or engineering support, please have this information available.

18

206-4122

Image 18

Contents 206-4122 Rev B For Customer Support/Service, please call1-888-865-3026 Important safeguards for you and your new product Safety Check Table of Contents Channel Assignments Setup InformationHCS6300 TranscodersFeatures HCS6300 Product DescriptionTranscoder Product Description Typical HD Transcoder System OverviewIntegrated elements of the Transcoder System Card Description HCS6300HCS6300 Functional Blocks MUXInstalling a CodePlus Feature Card Slot Satellite STB & HCS6300 Initialization & Setup Connections HD STBSystem Setup Typical HCS6300 System Installation6300 Typical Setup Flow Chart for HCS6300Hdtv Service Feed Combiner Distribution SystemNetwork and Communication Setup Controller Menu Commands Configuration Options via GUIAccess the CodePlus Transcoder Series Web GUI Access the Controller MenuView HCS6300 System Information Channel Map Available cards CardCard Card 11 HCS7700 Card 12 HCS7700 View MUX or Raw Bitrate Data Slot #5 Bitrate Mbit/sMbit/s Mux #1 Output Bitrate 31.746 Mbit/s Mux #2 Output Bitrate 34.051 Mbit/s Slot #8 BitrateSet the HCS6300 IP Address Reset the Controller card to activate new IP settings Password changedChange the Reload ProIdiom Key Password Success. Reset command sent to card Update HCS6300 and/or Transcoder Firmware via TftpPerform an External Card Reset Card Card HWID# is Transcoder Menu CommandsAccess the Transcoder Menu View Hardware Information for a Selected TranscoderView MUX Bitrate Data for a Selected Transcoder Card PI key checksum isView Software Information for a Selected Transcoder View the ProIdiom Key ChecksumSatellite STB Menu Commands Card Reloading the key Successfully reloaded PI keyCard 1 Channel changed to Card 1 Current STB Channel is Card 1 Satellite signal strength is 52%Read the Satellite Signal Strength Read the Current STB ChannelCard 1 STB Powered On Card 1 Satellite signal is lockedCard 1 Access card serial number is Card 1 STB Powered OffSet the Satellite OSD On or Off Card 1 The STB is resettingReset the Satellite STB Read the STB Activation StatusConfiguration Options via Command Line Access the HCS6300 Main MenuMain Command View HCS6300 System Information Set HCS6300 RF ChannelsPrint the RF Channel Map Perform an External Card Reset Display a List of Transcoder Cards Installed in the ChassisAccess Individual Transcoder Menus Resetting cardInstall a ProIdiom Key on All Transcoders Set the HCS6300 IP AddressAt the Use Tftp to download key y/n? prompt, either Xmodem File TransferTftp Transfer Reload PI complete OK Update HCS6300 and/or Transcoder FirmwareReload the ProIdiom Key on All Transcoders At the Use Tftp to transfer files y/n? prompt, eitherView MUX or Raw Bitrate Data Configure Card Number/Channel Assignments Reset Password for Reload PI Key GUI Option Set Cross point switch... OKCaset View Hardware Information for the Selected Transcoder Install a ProIdiom Key on the Selected TranscoderEncoder version Ethernet version Application version View Software Information for the Selected TranscoderReload the ProIdiom Key on the Selected Transcoder View the ProIdiom Key Checksum for the Selected TranscoderUpdate Firmware on the Selected Transcoder Reset the Selected Transcoder CardReturn to the HCS6300 Main Menu Satellite Receiver Menu Commands Access the Satellite Receiver MenuRead the Satellite STB Access Card Number Read the Satellite STB Activation StatusRead the Satellite STB Serial Number At the Satellite # Command prompt, eitherPower the Satellite STB On or Off Set Satellite OSD On or OffAt the Change auto tune settings y/n? prompt, either Return to the Transcoder MenuAudio/Video Freeze or Blank Screen TroubleshootingEquipment Setup Review Status LED Behavior Operating StatusEnvironmental Storage Conditions SpecificationsDimensions Operating ConditionsDocument Revision History / Notes Document Revision HistoryDate Description Open Source Software Notice LG HCS6300 MUX/MOD Feature Card Warranty