LG Electronics HCS6300 setup guide Satellite STB Menu Commands, Card 1 Channel changed to

Configuration Options via GUI (Cont.)

Reload the Pro:Idiom Key on a Selected Transcoder

This command reloads the Pro:Idiom encryption key on a single transcoder card. Note that a password is required to initiate this command.

1.With the Transcoder Menu on display, click on the down arrow at the right of the Card Select field, and select the appropriate transcoder card from the drop-down list of options.

2.Click on the Reload button at the right of the Reload PI Key field.

3.At the pop-up window prompt for the password required to execute the operation, type the password and click OK.

When the reload is complete, the system will display confirmation, for example:

Card 1:

Reloading the key ...

Successfully reloaded PI key

Satellite STB Menu Commands

The following subsections describe how to access and use the Satellite STB Menu commands.

Access the Satellite STB Menu

1.Access the CodePlus Transcoder Series web GUI as described on page 17.

2.With the Homepage on display, click on the Satellite STB menu tab or link.

The Satellite STB Menu (see example on following page) enables you to view and modify selected satellite STB configuration settings.

Set the STB Channel

1.With the Satellite STB Menu on display, click on the down arrow at the right of the Card Select field, and select the appropriate card from the drop-down list of options.

2.Type the desired three-digit channel number in the Set Channel field, and then click on the Set button at the right of the entry field.

If the channel is set successfully, the satellite STB will change to the specified DIRECTV channel and the system will display confirmation, for example:

Card 1: Channel changed to 209

206-4122 27