Configuration Options via GUI (Cont.)
View Software Information for a Selected Transcoder
1.With the Transcoder Menu on display, click on the down arrow at the right of the Card Select field, and select the appropriate transcoder card from the
2.Click on the Read button at the right of the Read Software Version field to view the selected card’s software versions, for example:
Card 1:
OS version:
Encoder version: 1.1
Ethernet version: 1.0
Application version: 2.0
View MUX Bitrate Data for a Selected Transcoder
1.With the Transcoder Menu on display, click on the down arrow at the right of the Card Select field, and select the appropriate transcoder card from the
2.Click on the Read button at the right of the Read MUX Bitrates field to view MUX bitrate data (displayed in millions of bits per second [Mbit/s]) for the selected transcoder card, for example:
Card 1:
Ethernet Input Bitrate: 3.826 Mbit/s (raw 3.838 Mbit/s)
Data Output Bitrate: 4.127 Mbit/s
Total Output Bitrate: 19.390 Mbit/s
The example above shows MUX bitrate data for an HCS6700 card. An HCS7700 or HCS7710 MUX bitrate display will show HDMI Input bitrate data in addition to Ethernet Input bitrate data. Refer to the Installation & Setup Guide for the applicable transcoder cards for further information on bitrate data.
View the Pro:Idiom Key Checksum
1.With the Transcoder Menu on display, click on the down arrow at the right of the Card Select field, and select the appropriate transcoder card from the
2.Click on the Read button at the right of the Read PI Key Checksum field to display the Pro:Idiom key checksum for the selected transcoder, for example:
Card 1:
PI key checksum is xxxxxxxxxx
where xxxxxxxxxx is a
Note: All transcoder cards in the card frame must have the same Pro:Idiom key file installed.
26 |