LG Electronics HCS6300 Channel Map, Available cards Card, Card Card 11 HCS7700 Card 12 HCS7700

Configuration Options via GUI (Cont.)

Set HCS6300 RF Channels

With the Controller Menu on display, type the appropriate RF start channel number in the data entry field at the right of the Set Start RF Channel field. Then, click on the Set button.

The remaining channels will be automatically assigned per EIA-542 STD CATV frequency allocation standards, and the system will display the channel assignments for the card slots (see example under “Read the RF Channel Map” below).

Read the RF Channel Map

With the Controller Menu on display, click on the Read button at the right of the Read RF Map field to display the current channel assignments, for example:

Channel Map:
Cards--------		+-----------
		RF Channel
--------1,	2	+-----------	2
4,	5		3
8,	9		4
11,	12		5
--------		+-----------

Display a List of Transcoder Cards Installed in the Chassis

There are two options for listing transcoder cards installed in the chassis: one (List Cards) identifies the type of transcoder cards and the cards’ serial numbers, while the other (List Card Details) identifies the type of transcoder cards, along with the cards’ hardware and software version information. See sample displays below and on the following page.

With the Controller Menu on display, either click on the List button at the right of the List Cards field, or click on the List button at the right of the List Card Details field.

Example: List Cards Display

Available cards:

Card	1: [HCS7700] [001-12080022]
Card	2: [HCS7700] [001-12080023]
Card	3: [-]
Card	4: [HCS7700] [001-12080024]
Card	5: [HCS7700] [001-12080025]
Card	6: [-]
Card	7: [-]
Card	8: [HCS7700] [001-12080026]
Card	9: [HCS7700] [001-12080027]

Card 10: [-]

Card 11: [HCS7700] [001-12080028]

Card 12: [HCS7700] [001-12080029]

206-4122 19