Configuration Options via GUI (Cont.)
Example: Satellite STB Menu
Read the Current STB Channel
1.With the Satellite STB Menu on display, click on the down arrow at the right of the Card Select field, and select the appropriate transcoder card from the
2.Click on the Read button at the right of the Read Current STB Channel field to display the currently selected satellite STB channel number, for example:
Card 1: Current STB Channel is 209
If you receive an error message, it may be necessary to reset the satellite STB either using the “Reset STB” command described on page 30 or using the RESET button on the satellite STB front panel.
Read the Satellite Signal Strength
1.With the Satellite STB Menu on display, click on the down arrow at the right of the Card Select field, and select the appropriate transcoder card from the
2.Click on the Read button at the right of the Signal Strength field to display the satellite signal strength (displayed as a percentage) at the Satellite In jack on the satellite STB, for example:
Card 1: Satellite signal strength is 52%
28 |